How and what to wash the primer from the glass?

If during construction or repair activities it is not possible to protect the window panes from getting a primer, it is important to find out how to remove the substance from the surfaces. There are priming compositions that are simply washed off with plain water. Others, on the contrary, are problematic to remove even with the help of specialized cleaners. Consider the most practical, effective solutions that will answer the question of how to wash the primer from the glass?

What is a primer?

Before you figure out what to clean the primer from the glass, let's see what the substance is? This kind of materials is widely used in construction and repair for the adhesion of coatings. After evaporation of water, the primer undergoes polymerization, solidifies and becomes difficultly soluble. Therefore, it is extremely important to understand beforehand what to clean the primer from the panes? We will try to answer this question further in the material.

Tools and tools for cleaning the primer

Than clean the primer from the glass? To solve the problem, you can use the following tools:

• Solvents (acetone, white spirit, etc.);
• water;
• Household detergents;
• Concentrated chemical compounds;
• Folk methods (acetic essence, baking soda);
• Blade, scraper, abrasive sponge, washcloth.

Next, consider the appropriateness of the use and effectiveness of the products presented, depending on the type of primer that hit the surface of the glass.

Primers for wallpapering

Quite often, before turning to wallpapering the walls with wallpaper, the masters resort to surface treatment with special primers. Immediately it is worth noting that such substances are washed off without unnecessary problems, especially if the cleaning is carried out until the moment of full hardening.

How can I wash the primer from the glass? In this case, it is enough to use any wet rag that was at hand. It can be a wet cloth, a sponge or a sponge.

If the primer for wallpapers has frozen on the surface of the glass, do not immediately resort to the use of abrasive materials. In such a situation, it is recommended to moisten the places of staining and wait for the swelling of the contaminants. As soon as the primer is softened, it is worth erasing the tracks with the same sponge or piece of cloth.

Than wash the acrylic primer from the glass?

The presented type of materials, as well as the compositions of the above category, are easily removed from smooth surfaces - glass, tiles. Formed pollution should only be thoroughly soaked in water. After a while, the acrylic primer will soften, and it can be removed without the use of chemicals.

Exceptions are compounds that contain dyes. In this situation it is necessary to resort to surface treatment with white spirit. Pre- treatment of the glass with hot water allows faster coping with the task.

Than wash the primer of deep penetration from the glass?

To primer compositions of deep penetration are substances with a content of phenols. The latter are mainly used for impregnating a tree. When such formulations get on the surface of the glass, their final polymerization takes place in less than a day. If the phenolic primer has not been removed before this time, it will be necessary to resort to the use of chemical solvents for cleaning. Help comes here: solvent, xylene, all the same white spirit. For greater efficiency, these agents can be mixed together in equal proportions.

Cleaning the glass from the traces of a deep penetration primer is done as follows:

• Glass is moistened with warm water;
• On places of formation of stains the solvent is put;
• After a few minutes, the surfaces are gently wiped with abrasive material, avoiding strong pressure;
• The specified operations are repeated in the same sequence;
• In the end of the glass cleaned with any available rags or a soft sponge.

How to remove the adhesive primer from the glass?

Substances of this category are intended for impregnating surfaces in order to improve the coupling between the substrate and the materials used in the finish. Such compositions are not soluble in water and very quickly go through the polymerization process, forming a stable coupling with the surfaces. Therefore, it is extremely difficult to remove them.

Than clean the primer from the glass? The only effective solution for removal of the frozen adhesive composition from windows is the use of mechanical cleaning methods. For these purposes, it is best to use a thin blade. Keep it at an angle of about 45 °. When passing through the glass surface, it is necessary to try to engage the edge of the primer spot with the sharp edge of the blade. After removing the flakes of frozen matter, it is desirable to clean the contaminated areas again.

To facilitate the procedure for removing impurities mechanically, organic solvents can help. Means of this category contain esters in the composition, which partially neutralize the adhesive properties of the primer. Preparation for cleaning glass using organic solvents is performed according to the following scheme:

• The piece of matter is wetted by the ethereal composition and applied to the spot;
• Approximately half an hour, rags are removed from the glass;
• The formed jelly-like structure is removed by a blade or spatula;
• The glass is wiped with a soapy sponge and then with a damp cloth.

The use of strong cleaning compounds

In cases where the implementation of the above solutions does not produce the expected result, or the type of primer is unknown, one should rely on "heavy artillery" - household chemical compounds, which are used to remove problematic, persistent contaminants.

Among the most effective cleaners, it is worth noting the following:

• Veroclean.
• Powerfix.
• Hodrupa.
• Atlas Zsop.
• Dopomat.
• Corvett.

All substances, in addition to the acidic Powerfix (effective in cleaning ceramic tiles), are of an alkaline nature. Considering the high concentration of chemical components in their composition, it is recommended to work with them when cleaning the glasses from the primer with gloves and goggles.

Traditional methods of cleaning

As assistants, household remedies for removing primer stains from glass, it is often used boiling water, bite and baking soda. The contaminated surface is treated with hot water. Next on the stains put undiluted vinegar. After passing 10-15 minutes, it is washed off, after which the softened traces of the primer are wiped with baking soda. As a rule, for a complete cleaning of surfaces, the procedure must be repeated.

Finally

In order not to burden yourself with finding an answer to the question of how to wash the primer from the glass, it is important to minimize the likelihood of the formation of persistent contaminants during construction or repair activities. For this, it is necessary to preliminarily close the window openings with a polyethylene film. The joints should be sealed with adhesive tape or covered with a paint tape. All this will avoid doing unnecessary work.