Heating Private House With Your Hands

Everyone who lives in a private home, dreams of making a reliable and inexpensive heating system. Make the heating of a private house with your own hands is not difficult. Heat in private houses in the cold time is created by stove heating. Nothing more reliable person has not yet figured out.

Furnace heating has two drawbacks: labor intensity and a high temperature drop; therefore, an electric or gas boiler can be installed instead of it, which do not have these drawbacks, but they have their own - in case of possible interruptions in the supply of energy, the heat also ceases to be generated, For this extreme case, and before that, let it perform a decorative function.

Before you start installing the heating of a private house with your own hands, get acquainted with the different types of heating and choose the option that is most suitable for your home. For example, a combined heating system uses separate elements of different systems, taking into account the specific layout of the house, which increases the efficiency of the system as a whole.

Before making the heating of a private house with your own hands, warm the house well, otherwise you will simply heat the street, which will lead to a decrease in the efficiency of the system as a whole and to an increase in costs.

What types of heating systems are installed in a private house? These can be single-pipe and two-pipe systems, as well as heating systems using collectors, radiators, which are also called batteries, and registers.

Each of these systems has its drawbacks and advantages, and we will choose one that could work properly both from the electric boiler and, in the event of an emergency power cut, from a conventional solid fuel oven. It should also be possible to work from an electric boiler and a stove at the same time - this is in case of very severe frosts, that is, at any frosts from the system, a reliable heating of the required room volume is required.

When installing the heating yourself, it must be borne in mind that it is desirable to install a stove or a solid fuel boiler in a separate room, and it is not necessary in a special annex, as often builders do, that you can use existing small rooms like a pantry.

Installing water heating with your own hands, you need to know that it is single-tube and two-pipe, and the water circulation is natural and forced. The two-pipe system, which has a pipeline two and a half times longer than the one-pipe system, is considered obsolete and irrational. In addition, it is very difficult to establish. The one-pipe system is easier to install, it is warming up more quickly and evenly, therefore, when installing water heating with your own hands, this system is chosen.

When the heating is installed by oneself, a simple one-line system will include the following elements: a heating boiler, an expansion tank, or a hydraulic accumulator, radiators, or, as they are often called in everyday life, batteries, a filter and a circulating pump. If the heating is installed in a small one-story house, the circulation pump may not be used.

For the pipeline it is better to choose polypropylene, rather than steel, corrosion-prone pipes. Polypropylene pipes are easily cut, they do not need to be welded or painted, the heating system is not clogged from them. Its drawback is that this system has forced circulation. Aluminum radiators also do not clog the system, and their heat emission is twice as much as that of cast iron, which makes it possible to reduce the fins available on the radiator. But cast iron radiators are slightly cheaper.

As you can see, it is not difficult at all to make water heating of a private house with your own hands.