Hamster made of elastic. How to weave from a rubber hamster

Multicolored gum is an excellent material for creating a variety of jewelry, including bracelets and bows for hair, charms, as well as three-dimensional toys. It is to the latter category that the hamster of gum belongs. Of course, the weaving of this craft is not among the simplest activities, however, having shown enough patience, any needlewoman can make with her own hands this nice little animal.

Weaving a hamster from rubber bands: what needs to be prepared?

The main material that is needed to make this craft, as you probably already guessed, are the rubber bands. They can be either monophonic or several colors, depending on what kind of animal you want to get as a result. The most realistic hamster of rubber bands will look if for its manufacture use elastic bands of orange or brown (for the back) and white (for tummy and legs) colors. In addition, you will need a pink or red rubber band for the spout and two black eyes. In total, 100 pieces will be needed.

In addition, you need 2 clips for fixation, 2-3 hooks, toothpicks, as well as a special machine for weaving, since a hamster of rubber bands on the forks can not be made.

Weaving of hamster's paws and tabs

Before you start making the torso of the animal, you need to weave 4 paws and 2 tabs. Of course, this can be done a little later, but then it will be necessary to break away from one activity and switch to another, which is not entirely convenient, since this can lead to confusion, especially for those needlewomen who have just learned how to make a hamster of rubber bands, And try to apply the new information.

So, for the weaving of the hind legs, you need 3 white gum. Two of them must be wound in four turns on the hook, and the third one must pass through the formed loops. In order to prevent unwinding of the resulting part through the two loops formed by the third elastic band, you should pass a toothpick or hook if there is an extra one. Similarly, you should make 2 front paws and two ears, but instead of whites use orange or brown gum, depending on what color the back will have a future hamster of rubber bands.

Features of weaving of the trunk and head

To start the making of a small animal is necessary from the correct location of the machine, it must be installed in such a way that the middle row of 1 element is pushed forward, and all the columns are turned to the right with a notch. Weaving a hamster of rubber bands involves the presence of 9 rows. It should be noted that the back of the future animal will be formed on the row of the machine nearest to the needlewoman, and the belly at the far end. Therefore, if you are planning to make the most realistic animal, it is necessary to take into account the orange and brown gum on the bottom row and the side of the machine, and white on the top. As a result of such a weaving, a hamster with an orange back and a white belly will turn out.

The initial stage of weaving the trunk and attaching the hind legs

Having prepared all the materials and taking into account the features of the figure making, you can start to weave the first row. For its formation, it is necessary to connect all adjacent columns with elastic bands crossed by the "eight". Since you are only just getting acquainted with the information on how to weave from the hamster's rubber bands, you should also keep in mind that starting the creation of the first row follows from the protruding column, and then proceed to the neighboring ones, forming a hexagon on the machine. The side should consist of four elements, then it is necessary to make a ledge and close the row.

Now you already know how to weave a hamster out of rubber bands at the very beginning, but making the second row has its own peculiarities. On it, it is necessary to attach the hind legs that were made at the beginning of work. Start the weaving of the second row again from the protruding column, putting on the orange gum on it and the neighboring element of the far side of the machine. Then on the first column of the upper row, you should put the hind paw behind one loop, in the second it is better to leave a toothpick or hook. Next, starting with the same column, you should put on 3 white gum, connecting the neighboring elements among themselves. On the last column in this row, you need to throw a second hind paw, similar to the way it was done with the first. Continue weaving the circle until it closes with orange rubber bands.

Removing the rubber bands and continuing the weaving

After completing the second row, you need to remove the gum from the machine. To do this, their lower pair on each column should be grabbed and through the outer edge be thrown into the middle of the machine. These actions need to be done around the circle. As a result, one of the hind legs should be between the first and second bars, and the other - between the third and fourth. Now you need to master how to weave a hamster of rubber bands in the third row.

In a circle, starting from the first column of the far row, you need to put on the necessary amount of gum: first 3 white, and then the rest - orange. The fourth row is woven in the same way as the third one, and then the gum must be removed in a similar way to the one that was done after the second row.

During the making of the 5th circle, you will need to fix the hind legs. On the front of the first row of the upper row of the machine, the rubber band should be put on, then the last one must be hooked with the help of a hinge, which was still on the hook, the foot. Weaving should be continued until the last column of the upper row is reached, which will also need to be put on the second loop of another hind leg. Closing the circle follows the already known method.

Although you still do not know how to weave from the hamster's elastic bands completely, how to take off the hinges, you already know, and this action will need to be done after the completion of this series. The next circle is similar to the third, and then removed.

Joining front legs and ears

On the 7th row, you have to put the front paws and ears, which you wove even when we were just beginning to get acquainted with the information on how to make a hamster of rubber bands. The hind feet will be attached to the upper side of the machine. To do this, connect the protruding edge of the first row of the row to the rubber band. Then at the last throw one loop of the front foot, and the next - the second. The next two bars are connected with one more rubber band, and then similarly the first put on the second front leg. Further it is necessary to continue the weaving and on the front side of the machine to put the ears. To do this, you need to do the same actions as when attaching the front legs. At the final stage of this series, it is necessary to remove the gums, using the already known principle.

Eye wiring and their connection with the trunk

But what animal without eyes? And they must first be made, and then weave into a series of crafts. To make the eyes, you need to take a black rubber band and wrap it around the hook in four turns, and then fold the received loops into orange. Of course, there must be two such details.

Next, you need to throw gum, starting with the protruding column and in a circle through the upper edge of the machine. On the underside, in those places where the ears were thrown in the previous row, it is necessary to fix the eyes in the same way and to close the circle. Then you need to remove the gum again.

Forming a muzzle of a hamster made of rubber

The back and belly of the hamster are already ready, only the muzzle remains. To produce it, the next row, 9, should be weaved in the usual way, though only from orange rubber bands. After the end of the circle, its loops must be removed similarly to the previous ones. All ranks are completed, but the hamster is not ready yet, it needs to be removed from the machine. To do this, the loops from all the bars should be assembled on one hook, and then stretched through them with an orange gum.

If you can not transfer the entire article to one hook, you can use several. However, as a result, all the loops should be assembled on one elastic band, which must be tightened as much as possible, and through both ends of the loop, pass the clip, to the opposite side of which the nose will be fastened.

To make the last part you need to put a "figure-eight" on the machine pink gum, and then one of its edges once again twist and throw back on two columns. Next, the lower elastics need to be removed to the top, resulting in a nose that should be attached to the other edge of the clip. After that, this element must be shoved inside the craft, leaving part of the pink nozzle on top.

Forming the back of the toy

After carrying out the described actions, the needlewoman can already see the muzzle of the little animal, but she will immediately have a question about how to make a hamster of rubber bands on, because from the opposite side it turned out a hole. It must be closed. To do this, use the hook to collect all the external loops around the circle, pass through the rubber band and tighten as much as possible.

In order to avoid slipping the loops to the resulting "tail," you need to attach the clip and hide it inside the craft. After that, the hamster will only have to be straightened out properly, stretch out the paws, ears and can be fastened to the keys as a keyring or presented to someone as a gift.