HomelinessTools and equipment

Gas column "Junkers": description and reviews

For heating water in houses and apartments, gas columns are increasingly used , which are easy to operate and allow to regulate the intensity of heating. Visiting the store, you may face the problem of choosing a particular model.

Complexity of choice

First of all, you should pay attention to popular manufacturers who produce products that have proven themselves in the modern market. This is the gas column Junkers, which has many advantages. Before purchasing such equipment, you should become more familiar with the characteristics, as well as instructions for a particular model. Do not interfere with the selection and feedback of users.

General description of the gas columns of the Junkers brand

As practice shows, all water heaters from the Junkers producer are well adapted to operation in the conditions of Russia. This equipment has many advantages. For example, the devices are adapted to operation in gas pipelines, the pressure in which reaches a value of 13 mbar. If we consider unadapted devices, then they will be less productive in such systems.

It is worth noting also the low head of water. The Junkers gas column is capable of operating under these conditions. This is especially true of multi-storey buildings. Even if the water pressure in the system is 0.1 atm, the column will still work.

These devices have high performance. In a minute you can get water in a volume of 11 to 16 liters. Mixing of water takes place in the mixer, but the flame is modulated by automatic power change, which will depend on the volume of the water flow. You can count on the quality of the German assembly, safety and long life. Manufacturers give a guarantee on their products for 2 years.

Description of different types of columns of the Junkers brand

If you are interested in the gas column "Junkers", then you should consider the features of different models that relate to certain series. For example, the equipment of the B series does not have a constantly burning igniter. The fire is from two batteries. The column turns on automatically, has several safety and traction control systems.

You can use the ionization regulation function of the flame and count on the operation of the fuse. The temperature and flow of water are regulated, depending on how the water pressure in the water pipe will be. You can find out about the faults according to the display. Columns of this series are made of high-quality copper, which can last for 15 years. The Junkers gas column can also refer to the P series, the equipment in this case has a piezo spark, and the ignitor will burn constantly. Flow and power are regulated separately. Through the thermoelectric system, the intensity of the flame is monitored. In equipment that belongs to the G series, the manufacturer has provided the ignition technology. The lowest minimum head of water at which the column will work is the figure of 0.35 atm. The burner does not have a burner, and the ignition is carried out by means of a hydrodynamic generator. If you prefer one of the G series speakers, you can count on the fact that you can connect the equipment to three water intake points at once. All models can have a minimum or standard size. Both versions have the same equipment, and the difference is only in size. The cost depends on the apparatus and the need for transportation and installation.

Reviews of the columns "Junkers"

The Junkers gas column, which you can read about below, according to users, may face a problem. Despite the fact that the design of such devices is one of the most perfect for today, breakdowns can still happen. This can lead to voltage drops, corrosion of the shell, as well as the formation of scale. Factory marriage is eliminated for free.

Consumers emphasize that the problem can arise when the ignition filter goes out. As a cause in this case, breakdown of the valve, thermocouple or flue gas sensor. Sometimes it happens that the column does not heat the water, in this case it is necessary to pay attention to the heat exchanger's serviceability.

According to buyers, sometimes the water heater starts to make noise and heat up. The cause in this case is clogged with scum or breakdown of the radiator. "Bosch Junkers" is a gas column that is modern technology, but even with the operation of such equipment, difficulties can arise. Some users note that the case may begin to leak. This is sometimes caused by problems with the heat exchanger or the stuffing box. If you notice that the spark ignites, the flame controller may be broken.

WR 275 column instruction manual

If you bought the Junkers WR 275 gas column, you should read the instructions from which you can find out that the smell of gas may appear during operation. If such a situation arises, it is necessary to immediately close the gas cock, open the window and do not use the electric switches. The open flame must be extinguished, then you should immediately call the gas company.

In order not to create a fire hazard situation, close to the device should not store flammable materials and liquids. The Junkers gas column, the instruction manual for which is supplied with the goods, should be used in rooms where air is supplied from outside. Therefore, it is important to install a ventilation system with an area of 0.02 m 2 with a capacity of 30 kW gas equipment.

Conclusion

When installing the flue gas pipeline, make sure that its total length in the horizontal direction does not exceed 3 m, this applies to new houses. If the installation of equipment will be conducted in the old house, then this figure can be equal to 6 m.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.delachieve.com. Theme powered by WordPress.