Best Wi-Fi router for optical fiber

Not so long ago optical fiber was used for high-speed data transmission. Previously, not every user could afford to install in his apartment a separate terminal that worked only for him. In this connection, Internet providers "launched" an optical cable into the apartment building and connected it to the network module, and already from it copper wires or twisted pairs flowing from the information flow passed to the apartments. At the same time, the data transfer rate dropped significantly. But with the creation of connectors FTTB situation has changed dramatically.

Best Wi-Fi router for optical cable

Now every resident of the city can afford a separate fiber-optic router. But this raises another question: how to transfer an Internet signal via Wi-Fi, for example, to connect a tablet, smartphone or laptop? To solve this problem, you need to buy a router with a built-in Wi-Fi module. But a large range of products on the market can plunge even an experienced user into shock.

In order not to get lost in the whole variety of devices, you need to determine what in your understanding means the best Wi-Fi router? Perhaps it is a combine that will easily provide high-speed Internet with a dozen devices? Or will it be a compact device with an optimal ratio of price, functionality and durability? To help you figure it out, let's determine what parameters a wireless fiber router with WiFi should have.

Ports and Bandwidth

Earlier, when the optical cable was first put into an apartment building, it was connected to the terminal, and only then it transmitted the Internet signal to the apartment owners, the FTTH port was used. Not so long ago a new format was developed - FTTB, which allows you to connect fiber to a router located in your home. To connect an optical cable directly to the router, two groups of ports are used - WAN and SFP.

The first group is the most common. Externally, the WAN port is a normal connector for connecting a telephone cable. However, before you make a purchase, ask your ISP for the type of WAN port you need to connect. A fiber-optic router equipped with an SFP connector is suitable for connecting any cable, as it is a standard format.

When choosing a router with a WAN port, you need to make sure that the bandwidth is not lower than the signal speed that your operator guarantees to you. Otherwise, you risk overpaying for the Internet. SFP-connectors provide data reception at speeds up to 1 Gb / s and provide optimal bandwidth for any connection.

Wi-Fi standards

Choosing a high-throughput router, you need to determine its data transfer interface, otherwise there will be a situation where the router can receive a high-speed signal, but it can not be distributed to mobile devices via a Wi-Fi network. Therefore, when purchasing an optical fiber router, make sure that the wireless interface standard corresponds to one of the following:

• IEEE 802.11b - create a Wi-Fi network with a data rate of up to 11 Mbps;
• IEEE 802.11g is a higher-speed protocol that provides speeds of up to 54 Mbps;
• IEEE 802.11n - the most advanced of existing standards, transmits a signal with a speed of up to 300 MB / s.

Choosing a router in the store, you need to make sure that the device's guaranteed Wi-Fi speed is not lower than the speed of the Internet, which you provided the operator. Now let's consider the most popular router models among customers.

A series of routers D-Link-615

The company D-Link is one of the leading suppliers to the domestic market of Internet equipment. Its products are noted by users for the optimal price-quality ratio.

When choosing a fiber optic router for the first time, take a closer look at the DIR-615. A simple and intuitive interface simplifies setup. The radius of "distribution" of Wi-Fi signal up to 300 Mbit / s with two antennas will be enough to cover the whole area of the apartment. There is a built-in IPTV function for watching interactive TV. Another bright representative of the series is the D-Link DIR-615 / FB. The router is equipped with a WAN-port and two antennas, providing a signal for a fairly large area with a speed of up to 300 Mbps, has a LAN connector for connecting the cable Internet.

D-Link High Speed Internet Router

The D-Link DVG-N5402GF fiber-optic router is one of the best, adapted for high-speed data transmission. It is equipped with 4 ports, providing reception of a signal at speeds up to 1 Gb / s, a WAN connector. Has a Wi-Fi interface standard 802.11n, which determines the transfer of data at speeds up to 350 MB / s. Two removable antennas cover a large area. The D-Link DIR-825 / ACF router uses the SFP connector to receive data, so that the Wi-Fi distribution rate reaches 1167 Mbit / s while simultaneously connecting up to 4 devices to the network. The USB interface can be used to connect a network drive. The ability to filter MAC addresses and modern security protocols will protect your network from intrusion.

Routers from the provider

Some providers, when connecting a fiber optic cable, offer their own fiber-optic router. Rostelecom, Beeline, MTS are well-known operators that supply their equipment at the time of subscription. However, the cost of connection is significantly increased. In order not to overpay, you can choose your router, because there is no difference from which manufacturer to use the device.

It should be remembered that the parameters of the input signal correspond to the guaranteed data transfer rate. As the most optimal variant it is possible to advise Mikrotik RB2011UAS-2HnD-IN with impressive appearance and original design.

An alternative may be Huawei EchoLife HG-8240. It has several slots for connecting devices over the local network, a special port for interactive television, and provides a data transfer rate of up to 1GB per second.

Features of connection of a router to an optical fiber

In some cases, when connecting the Internet inside the apartment can install a terminal. Employees of the provider company themselves install a similar device and connect optical fiber to it. Which router to choose and how to connect it to the terminal, you decide. First, you need to merge the selected router and optical terminal. This is done using a cable. If an optical network has been installed in your house, this can be done through an optical outlet. After that, the router is connected to the computer and the connection to the Internet is checked:

1. Open the command prompt as administrator.
2. Run the netstat -e -s command, and then ping google.com.

After that, it remains to check the speed of the Internet signal. To do this, open the "Task Manager" and select the "Network" tab. If the connection speed is the same as the one you were guaranteed by the provider, then you have taken into account all the recommendations on how to connect the fiber to the router, and correctly selected the router.