Garden trolley with their own hands: photo, instruction

A garden trolley with its own hands can be made. It will become an indispensable assistant to the trucker, who moves fertilizers, building materials, garbage and soil. If you have a wheelbarrow at hand, then you will ease your summer life and save your strength. However, for starters it is important to get acquainted with how to make such a design yourself.

Manufacture of a single-wheeled trolley

The work on the manufacture of such a trolley must begin with determining the size of the future design. The parameters will be determined by the volume of the container, which will form the basis. Proceeding from this, it is necessary to choose a wheel and a frame. Among the additional elements should be distinguished levers, handles, ribs and base. You will need racks, fence, straps and cross ribs.

After that, you can prepare tools, namely:

• The Bulgarian;
• drill;
• Saw for metal;
• Screwdriver;
• a hammer;
• Welding inverter.

Among the materials should be allocated:

• The tube;
• Sheet of steel;
• Corner for support posts;
• Nuts;
• Thin-walled tube;
• Cotter pins.

As for the steel sheet, its thickness should be 1 mm, whereas the area of the sheet will be 2 m ² . As an axis, a tube will be used, it can be replaced by an armature. For the support racks, you should prepare the corners, but for the cargo racks and handle, you need a thin-walled tube, its diameter should be 20 mm.

Assembling the trolley

If you will be making a garden cart 1 wheel with your own hands, then you need to follow the technology. According to the sketch you should perform the marking, in the next step you can cut the workpiece for the body. From the elements you need to assemble the body using welding. Given the parameters of the body, you need to assemble the chassis.

The lining is strengthened to the base. The racks are fixed to the latter. Next, you can begin to weld the rib. The body is mounted on the knot, it should be welded to the ribs. To the upper edge of the body, attach the remaining rib and fix it with welding. To the lower, as well as the upper rib and the body wall, weld the levers. On them the overlays are fixed.

If a garden trolley will be manufactured by oneself, it is recommended to consider the photo beforehand. This will allow you to avoid mistakes and determine the design features of the product. At the next stage, the stop should be fixed to the body. In order for the trolley to be more rigid, it is necessary to supplement it with ribs. To the base are fixed slats, in which it is necessary to pre-make holes. An axis is inserted into the wheel, the first of which must be fixed. On this we can assume that the assembly of the product is completed.

Making a two-wheeled trolley

If you compare a metal trolley with a wooden trolley, the first one will be assembled from the top down. The dimensions of the container in this case will also determine the dimensions of the frame. It is important to check the tightness of the trough, then with the trolley it will be possible to transport even pasty or liquid cargoes, while they will not leak or contaminate the garden area.

Making a 2-wheeled garden trolley with your own hands, the next step is to start welding the frame. This is due to the fact that using bolted connections strength can not be achieved. The handle should be welded to the frame, following the shape of the letter P.

The upper crossbar should be smooth, it should be placed parallel to the ground. For the frame of the trolley, it is necessary to choose pipe trimmings or reinforcement, the last of which will have a diameter of 12 mm. However, pipes are more preferable, because their welding provides a higher strength. As reinforcing bridges, the reinforcement will come out.

Wheel installation and assembly work

When a 2-wheeled garden trolley is manufactured by one's own hands, the next step is to fix the wheels. They have to be welded to the lower parts of the frame. You need to do this separately. The body can be made on bolts, for this, in the tank and the frame, drill holes, where afterwards bolts will be installed. On the reverse side they must be tightened with nuts. Between the plane of the tank and the bolt heads, the sealing washers must be laid.

It is possible to use pneumatic wheels, which are pumped by the pump. This will increase the carrying capacity of up to 80 kg. In addition, the wheelbarrow will increase throughput. The advantage of pneumatic wheels is also the fact that the handle can be used to control the brakes. In this case, the trolley can be moved even along inclined planes, the cargo does not crumble, and the trolley does not overturn.

Manufacture of a wooden trolley

Garden carts two-wheeled with their own hands gardeners are also made quite often. This approach will be the easiest. Complex equipment like a welder or a metal cutting saw is not needed here. The tree can be processed according to the standard scheme. However, the wooden wheelbarrow will yield in terms of carrying capacity and durability to the metal fellow.

At the core is a frame, which should be made of thick boards, put together in the form of a rectangle or square. The bars should have a square section with a side of 70 mm, otherwise the wheelbarrow can only be transported with leaves or hay. The frame of the beams is assembled with an overlap, in the corners it is necessary to arrange the screws to strengthen the structure with metal corners. You can supplement it with overlaps.

If the farm has antiseptic compounds, the wood should be processed by them in advance, then the wheelbarrow will be able to resist dampness and rot. To the bottom of the frame, you need to reinforce the slats for ball bearings. Depending on the number of wheels, their number can be one or two.

Methods of work

A wooden cart is usually made two-wheeled. If there is a ready-made axle on which it is possible to install wheels, then a bar with bearings will not be needed. The wheels are fixed on the skeleton of the trolley. At this stage, you can correct the flaws of the wheel fasteners. The handle of the structure will have a large load. Therefore, it is desirable to make it out of metal. As a metal handle, a steering wheel from a scooter or a long steel stick is suitable. Mounting should be pivotal with a lock. This design will allow the fastener to be reliable and folded when stored.

Four-wheeled cart from a barrel or metal

A garden trolley 4 x wheel with your own hands can be made of sheet metal. Its thickness can be equal to the limit of 2 mm. The body is assembled from the material, after which it is necessary to weld the chassis and handles to it. Depending on what the load on the finished product will be, you can use wheels from a bicycle, moped or motorcycle.

Making a garden trolley with your own hands, you can make it cheaper if the box is made from an old iron barrel. Begin work is necessary from the manufacture of the supporting structure. It must have a rectangle shape for 4 wheels. To do this, use a non-heavy metal profile, this can be a pipe or a product of a square section. On the sides of the structure are installed wheels, while at the desired angle, you should install the elements as handles. Half of the barrel must be installed on the frame. Bottom welded pipes or arcs. This is necessary to ensure the required load capacity.

Conclusion

If you decide to make a garden trolley with your own hands, the wheels for it can be purchased in the finished form in the store. However, if there is a desire to save extra, you can use the wheels from the old moped or motorcycle. It is better to choose pneumatic wheels, because with them you can increase the carrying capacity of the wheelbarrow and increase its patency on uneven surfaces.

It is noteworthy that the garden trolley with its own hands can be made even from unnecessary things and the type of scrap metal and old metal beds. But in this case, the master should have the skills of a welder.