Finishing the attic floor - possible options and technology execution

The attic is an attic of a house, which many owners are remodeling to living quarters. The main advantage of the attic is isolation - it is always calm and quiet here. From it you can make a room for rest, a bedroom, a nursery or a study. This requires interior decoration of the attic floor.

Things to do before finishing

To ensure that the furnished rooms are cozy, dry and warm, first of all you need to check the roof - is there any leaks in it. In addition, you should pay attention to the strength of beams and rafters. They should be dry, free of mold and rot, as they will be attached to them with finishing material.

It is not recommended to carry out facing of a fresh wooden structure because of the content of a large amount of moisture in it. This can lead to a shift in the lining material. Finishing the attic floor is carried out after the insulation of walls and ceiling.

Warming of the attic

From the proper warmth of the attic floor, the heat and comfort in the rooms located on it depends. The first under the roofing material is laid a layer of waterproofing, which prevents the accumulation of moisture. Overlap it overlap. Waterproofing is fixed with a special construction stapler or with the help of rails. Then tightly stack the heater. It is necessary to know that the heat-insulating material, packed in several rows, should not coincide at the seams. The most practical and suitable option for warming the attic is an elastic basalt mineral wool, which has the properties of non-combustibility and noise insulation. Then lay a layer of vapor barrier. The rafters on both sides are lined with wooden strips, which provide an air gap between the hydro- and vapor barrier layers and the insulation. Finally, the finishing material is fixed.

The layout of the thermal insulation material includes the following elements:

• Roofing material;
• Wooden crate;
• A layer of waterproofing;
• Laying insulation;
• Vapor barrier layer;
• Control the lattice;
• Material for interior finishing.

Finishing the ceiling

For finishing the ceilings, you can use different finishing materials. It all depends on the height of the room. In order for the room to be comfortable, its optimal height should be 2.1 m. The ceiling, lined with lining or plasterboard, will look good. It is also possible to install stretch ceilings, which form an even, beautiful surface.

Warming and finishing of the floor

Warming of the floor of the mansard floor is made by heat insulation material throughout the area. For this purpose it is better to use mineral or glass wool. It is laid tightly between the beams. The thickness of the insulation layer should be at least 80 mm, on top of which waterproofing is applied. If the ceilings are made of a monolithic slab, then the floors should be better insulated with a screed.

In most cases, the floor is made up of boards with a thickness of 4-6 cm, laid on the beams. To circulate the air between them and the insulation material leave a gap. The flooring boards themselves must be high-quality, dry, with a bottom treated antiseptic. Wooden floors can be covered with linoleum, laminate or carpet.

Requirements for facing material

Interior decoration of the attic floor is often done with plasterboard, which has moisture-proof and fire-resistant qualities, or other fireproof materials. If the finishing of the attic floor of a wooden house is carried out by block house or wood, then they must be impregnated with special flame retardants.

Options for finishing the attic

The practicality of the premises located in the attic, depends on their internal lining. There are various options for finishing the attic floor, which help create a unique and unique interior.

If the attic is small, it should be decorated in a light color palette, which makes it possible to visually increase its area, and pastel colors allow to soften the proximity of the ceiling and walls. For finishing the attic room, regardless of the style of decoration, it is recommended to use materials of the same shade.

Finishing lining

The attic will look great if you trim it with a wooden lining. It is a universal natural material that fits well with other types of linings.

The decoration of the attic floor is thus very simple and quick. The main condition - the installation of the vagonki should be done carefully and check the level of the board position in order to prevent distortions. The lining is fastened to the wooden crate with carnations without hats. After installation, it is covered with a colorless varnish, which will protect the material from burning out.

Finishing plasterboard

The decoration of the attic floor, made of plasterboard, is very popular because of its low cost and excellent technical characteristics. It is fastened, like the lining, onto a wooden or made of metal profile crate by screws.

Installation of gypsum board can be done with single-layer or two-layer cladding. If the finish is done in two layers, first the first layer is fastened, and then the second one is fastened. In this case, the sheets are placed in such a way that their seams of the first and second rows do not coincide. Gypsum plasterboard decoration of the attic floor, the photo of which is presented in the article, is not difficult, but time-consuming. After installation, all joints and places from the screws should be puttied.

The equipment of the attic floor for living space helps to significantly expand the area of the house. After doing a quality finish, you will get a great room, which can be arranged according to the needs of the tenants.