Electric heating convectors: technical specifications, reviews, manufacturers. How to choose an electric convector?

The popularity of electric heating is not needed once again. If there is no possibility of connecting the gas main, then heating the room with electricity is the only way out. It is worth noting that for cottages or country houses, heating convectors are especially popular . The specifications of the devices may vary depending on the manufacturer and the particular model.

The device and features of an electric convector

In short, there is a metal case of the device in which the heating element is placed. Often it is protected by a mesh to prevent burns. The temperature is regulated by means of a thermostat. In addition, you can change the temperature either manually or programmatically. Modern convectors are equipped with sensors that control the temperature and maintain it in a certain range.

The heating element (TEN) consists of a conductor, which is sealed in a metal casing. In form, it is similar to a conventional radiator, which significantly increases the heated area. When the heater works, its temperature can reach 100 degrees Celsius. It is noteworthy that air is not dried, and oxygen is almost not burnt. This and good electrical heating convectors. The technical characteristics of the unit must be selected based on the area of the room in which it will be installed, but more about this later.

Types of convectors

Currently, heaters of this type are divided into groups, depending on the possibility of placement:

• Wall - can be installed in any free space. For example, a convector is hung under a window instead of a radiator. So the windows will not sweat, and the heat curtain is provided.
• Floor convectors - do not have rigid fixing, therefore they are equipped with wheels. Can move to a convenient place for you, the only limitation - the length of the wire.
• Skirting convectors are mounted near the wall near the baseboard. They are best suited for heating showcases or rooms with large windows.
• Universal - they can be attached to the wall using brackets or put on the floor, since they have legs. One of the best options, as it provides several ways of placement.
• Built-in heating convectors electric. Technical characteristics, in particular, power, are limited by the size of the niche in the wall or floors. Installation of such heaters is planned during the repair in the room.

Electric convector: how to choose

The first thing to do is to pay attention to the type of heating element. It can be a conventional spiral, which is protected from contact with air and interacts only with the radiator. The latter prevents the combustion of air and its drying.

A ceramic heating element is also installed. It has several significant advantages over the spiral. First, a long service life, and secondly, a more aesthetic appearance even without the installation of a protective grille.

We have already figured out a little about what an electrical convector is. How to choose such a device? Pay attention to the type of heat radiation provided by the heater. In most cases, this is convection, which is aimed at heating not an object, but air. This kind of device is most popular today.

There are convection-infrared devices. In addition to air, they also warm the surrounding objects. This is their energy efficiency.

Management type

Now there is a mechanical and electronic control. The first, produced with the help of a conventional regulator, is more familiar to us. It is quite convenient and reliable. However, it is not possible to program the device, and it is very difficult to set the temperature regime with sufficient accuracy. This is due to the fact that the scale often comes with an interval of 10 degrees, so the temperature of 35 or 55 degrees can not be put.

As noted above, there are also electronic heating convectors electric. The technical characteristics of these devices in terms of power are exactly the same, but it is possible to set the temperature to within one degree, and also program the heater for a certain operating mode. The disadvantage of this solution is that the electronics are sensitive to moisture, so the room should be dry. You can not put such a device in a bathroom.

Technical characteristics of convectors

Today, manufacturers offer a wide range of heaters. The differences between them are in the design, dimensions, and, most importantly, in power and functionality. Agree, it is very important to buy a convector, the power of which will be selected optimally.

Superproductive models will not be used 100%, therefore, there is no point in overpaying for them. If the power is insufficient, such a convector will not heat the room, which is also not good. There is a certain standard, according to which it is possible to choose a device of suitable power.

With a ceiling height of 2.5-3.2 meters, the convector is selected as follows: for each square meter of the room, 100 watts is needed. So, for a room of 10 squares you need a convector per 1 kW, 20 squares - 2 kW and so on.

We have already considered electric heating convectors, which are and how to choose the device of suitable capacity. And now let's deal with the functional.

Additional Features

In most cases, conventional heating is not enough. For this simple reason, there are additional functions that some electric heating convectors have. Their principle of operation is different. For example, ionization is needed to saturate air with ions, as well as to trap dust. It is noted that due to the functioning of such devices, the general state of a person improves, fatigue decreases.

Well, if there is such an additional function, like a thermostat. It is needed to save energy. For example, the device heated the room to 23 degrees. After this, the convector switches to economy mode, in fact, it turns off. When the air temperature drops, the thermostat will work and the appliance will start working again.

A timer is another useful feature that will help you set the desired heating time for a room. For example, the convector will work until 12 am, and then turn off until the morning.

Electroconvector heating: their capabilities and features

To date, the newest models can be considered truly unique. This is due to their wide functionality and reliability. Among the features is that the body of most products is made of a special alloy that does not heat above 60 degrees. Consequently, ignition of objects around you is excluded in the same way as a burn due to accidental contact. Another interesting thing is that you can program the convectors. True, this function is far from all models, it is inherent in high-price units.

User Reviews

What do ordinary people write about convectors? There are different opinions. We can say with confidence that much depends on the manufacturer. Some users write about how convenient the built-in heating convectors are. The technical characteristics of these heaters are such that in the event of a non-emergency situation (gas shut-off), they can play the role of an emergency source of heating in the room. This is very convenient, since such convectors do not occupy places, because they are put in a niche. It should be noted that in general, good reviews of infrared convectors. Users say that they perfectly warm the floor, furniture and other interior items.

Briefly about manufacturers

The best in terms of reliability and quality convectors produce in France. The products of Noirot and Applimo are especially popular. Despite the high cost of the units, they practically do not break down and are considered the most reliable in the whole world. Another noteworthy company is RODA from Germany. Products are famous for the optimal ratio of price and quality.

Good reviews among consumers are received by the manufacturer "Electrolux", and also "UFO". The products of these brands are actively purchased in Russia. If you purchase the products of any of the above-described companies, you will be satisfied with how the electric convector of heating will work. The installation and types of installation can vary depending on the model and its dimensions. In some cases, it is an anchor, in others - self-tapping screws, etc.