Infrared convector: description and characteristics

About 92% of the heat energy, which is radiated by infrared convectors, is directed to the surfaces of objects falling into the radiation region. By the way, here you can include not only objects, but also living organisms, for example, a person. As for the air, it heats up only in the volume of 8%. Radiation hits the surface, objects, walls and floor, heating them. This principle creates the primary heat. The heated objects begin to give the accumulated heat to the air.

Overview of the characteristics of infrared convectors: power

If you want to select an infrared convector, it is important to pay attention to the most important characteristic - power. This parameter is selected from the algorithm of 1 kW of power of the device for every 10 m ² . If you plan to use the described unit as the main heat source, it is advisable to select a device with a power reserve to compensate for possible heat losses that go through doors, windows and walls.

On the market there are models with a power of 300 watts. They can be used for temporary local heating of garages, basements and other auxiliary premises. For more effective work, it is best to place such devices closer to a person. Infrared convector of imported production is most often designed for power supply from a 240 V network, so when connected to a standard network, the device will not operate at full capacity. On this factor you need to pay attention when buying. Heaters of this type can be electric or gas, the latter type is optimal for heating large areas, here you can include terraces and verandas.

Source for work

An infrared gas- type convector can have a source for functioning as an electrical network or a liquefied gas. The power of these heaters starts from the figure of 1.5 kW. By purchasing a gas convector of infrared type, you can rely on direct or indirect heating. In the first case, the air required for the burner will come from the room and return with the combustion product. Therefore, when installing such a device, it is necessary to ensure the availability of an effective ventilation system. If you purchase a device with indirect heating, you will need a system for venting the gases.

If you are interested in gas infrared convector, it is recommended to read reviews about it. Consumers claim that such devices operate silently and have a well-designed security system. In the units there are two sensors, one of which is responsible for the oxygen level in the room, and in the event of a deviation from the norm, it turns off the heater. The second turns off the device when the device falls or tilts. This is an excellent protection against the ignition of the room. The positive features of such devices include the uniformity and speed of warming up, environmental safety, economy and compactness. However, before buying a gas convector, it is necessary to know whether it is possible to use equipment of this type indoors.

Convectors of infrared electric are produced with a power within 1.5 kW, so they can be used for domestic purposes. The helix of the heater is made on a quartz basis.

Description of different types of infrared convectors

On sale you can find infrared convectors ceiling, wall, floor and film type. In the first case, we are talking about devices that are cumbersome in size, but this does not complicate their installation. Such units are produced with remote control, which is very convenient for operation. In addition to the ceiling, ceiling infrared devices can be installed in a corner of the room or on the wall.

Wall-mounted instruments

Infrared heating convectors can be wall-mounted, in this case they have different designs and are similar in appearance to central heating pipes. Install these devices can be on the outer wall or in a niche under the window. A remote control and a programmable thermostat are included with them.

Reviews of floor-standing infrared convectors

The most mobile, according to users, are considered floor fixtures, they can easily be moved from place to place. Large models are equipped with handles, as well as wheels, a power cord and a compartment for it. According to buyers, almost all models have a shutdown function and protection against overheating. However, if you want a thermostat to be present, you should pay attention to this, since not all models are supplied to them.

Reviews about the film variety

An infrared convector can be represented by a film type. According to the buyers, it is possible to install such a device under the wall, floor or ceiling finish. Weight usually does not exceed 500 g, and the device can be used in any room, except for explosive and fire-hazardous. In order to ensure safe operation, you should purchase a thermostat. As a merit of all types of infrared heaters, a long service life is sufficient, which is 25 years and more.

Choosing between an infrared heater and a convector

Quite often, modern consumers today do not know what to choose - an infrared heater or a convector. Which is better, you can understand by reading the article. It is necessary to recognize that both these devices are popular for suburban real estate. Electric convectors had time to prove themselves, having appeared on the market since the 90s. last century. They are easy to use and simple to use.

Infrared heaters appeared only 5 years ago, today they are representatives of the latest generation of energy - saving appliances. If you, too, can not decide what to choose - a convector or an infrared heater, then you should pay attention to the fact that the first version of the device heats the room due to the constant movement of air flows. They arise because of the temperature difference in certain areas of the room. At the same time, one layer of air is heated after another, which ensures a relatively uniform temperature.

As a shortage of such devices, one can single out the creation of a comfortable temperature only in a certain part of the room. Therefore, staying in search of the answer to the question: "Is an infrared heater or convector - which is better?", You can make the necessary decision only when you become acquainted with all the features of these devices. For example, infrared devices heat the room, radiating heat flows with a clear direction. That is why, in a very short time, literally in 10 minutes, the zone, which the rays spread, will find a comfortable temperature. Electricity costs will be negligible, which is especially noticeable when compared with convectors.

Electric convectors often quite often benefit from the fact that they can be inscribed in almost any interior. Most often such units are installed in the niche of the wall or on special legs to make the device mobile. If you are thinking about the question of what is better - a convector or an infrared convector, then you should pay attention to the fact that the last unit will work not only due to air flows, but also heating of objects. Among other things, infrared heaters can be installed even in the bathroom. If they are located on the surface of the ceiling, then the room will begin to heat floors and tiles. Experts advise choosing convectors if you want to equip an independent heating system in the country.

The result

If to draw conclusions, it can be noted that convectors are more often used for permanent heating of a room, whereas infrared heaters are optimal only for a certain zone where there is a need to create an area of increased thermal comfort.

Conclusion

Solving the issue of placement, it can be noted that infrared products assume the possibility of greater diversity, but among the convectors one can find models that are intended not only on the walls, but also on the floor. Modern design solutions allow more competent entry of convectors or entire systems of them. But, anyway, what is better - a convector or an infrared convector - you have to decide for yourself.