Crafts made of plastic pipes - drawings

This article describes what you can do crafts made of plastic pipes with your own hands.

Organizers - convenient devices for storing small things

Even without special skills, you can easily make such useful crafts from plastic pipes with your own hands. In fact, even very short cuttings of different diameters will go into business. For work you will need a sharp knife and glue.

The drawing shows how to cut one edge off pieces of pipe to make a convenient organizer for writing small things or bathroom accessories. It is important only to try to ensure that the corners everywhere were the same.

Then cut the workpiece onto a plane: a stand or a wall. If desired, you can paint organizers or put on them a picture, an ornament. And you can even stick photos of the most pleasant moments of life.

According to this algorithm, you can make other handmade articles made of plastic pipes: a creative footwear shelf, a sockskeeper, a wine shelf. And if the cuts are done strictly horizontally, you will get beautiful flowerpots or vases for flowers.

Designer find - an armchair from scraps of propylene pipes

A good owner does not lose anything. With a reasonable approach, every little thing will go into the business, and the diligence of the patient master can produce amazing artifacts from plastic pipes. With his hands, with the help of the same knife and glue, a luxurious armchair is easily made.

Pipe pieces in this case are cut to an arbitrary length in large quantities. It is important only to observe the same dimensions of the longest supporting pieces.

Then the segments are glued along the length. The longest supporting pieces should be located at the same distance from each other. For the armrests, the pieces are prepared above those that make up the seat. And for the back we need even longer ones.

It remains only to sew beautiful pillows and stuff them with sintepon or to coat the foam with foamy details of upholstered furniture.

Stool from pruned polypropylene pipes

It is said that the gol is cunning for fiction. This is absolutely true! Only not a goal, and an economical person is able to invent something like this - create amazing crafts from polypropylene pipes left after repair or construction, that is, practically from garbage. So, with his wise approach to life, he will never be a goal.

For a stylish stool, thin trimming of pipes of different lengths will be required. Before work should make patterns from drawings of paper. They cut pipes with asymmetrical bevels from both sides and are glued together in length. The last cut is the supporting one, it will serve as a leg. Therefore, it is the longest and with a horizontal lower cut.

When all four side parts are assembled, they are sealed with corner cuttings. The bottom is assembled from short pieces with a horizontal cut from above. The stool can be painted in any color, and you can leave it white - it all depends on the passion of the master.

Fencing of the flower bed or sandbox

By the same algorithm as chairs and stools, it is possible to build other necessary things. It will be practically crafts made of garbage.

From plastic pipes are obtained excellent original fences in the suburban area or in the courtyard of a country house. And you can use even the most short cuttings of different length and thickness. They are fastened together in length in the form of a miniature fence and dug around the flower bed or sandbox

You can use a glue to make such a creative fence. And it will be even more interesting if you cut wires with wire, imitating a wattle fence.

Children's corner

If you make a fantasy, you can create interesting crafts from polypropylene pipes, which will please your favorite children. Funny stands for laptops and easels, canopies over a cot and frame houses playable easily with fittings and tees.

It is possible to strengthen the joints with glue, and paint the product with paint and varnish. And you can decorate the craft on top with stickers or ornament.

Greenhouse for the suburban area

It is difficult to list all the crafts made of PVC plastic pipes, made by the master-dreamers. But not to mention such a necessary and useful structure as a greenhouse is the height of imprudence.

For the construction it is necessary to protect the allocated space with boards or bricks and dig in the perimeter of the pins. Their diameter should be slightly less than the pipes used.

Now you can proceed with the construction of the frame of the greenhouse. Therefore, the next step is to secure the pipe sections on the pins in the form of arches. To do this, first the ends of the pipes are put on the racks on both sides. Then it is possible to additionally attach a pipe from the bottom of the sheet to the perimeter of the fence.

Add the rigidity of the structure by using several pipes, which should be placed perpendicular to the arches. The intersection points are cross-shaped with a wire or a strong twine.

Now it remains only to stretch the film on the structure - and the greenhouse is almost ready.

Coffee table with figured legs. Master Class

Craftwork from plastic pipes (PVC) is an amazing design work. For example, the original coffee table with a glass top and bent legs will become a real landmark of the home.

Of course, first of all, you should carefully think through, calculate and outline all the details of the future model of crafts made of plastic pipes. Drawing your own drawings is easy, if the master has a skill in this regard. Otherwise, you can use the ready-made one, which is offered here. Dimensions are taken arbitrarily.

The legs of this table are arcuate. To add stiffness to the pipe, you need to reinforce it. For this purpose, a strong wire is suitable. The master on the desktop draws a life-size form of one arch and stacks the first piece of pipe with a rod inside. Then he gives the arch the right shape. The same should be done with the second segment. Although you can use a template made of cardboard to give the desired shape.

Then, on the table, the shape of the arch-holder is drawn, on which the table top will lie. Here, too, it is appropriate to use a template. Holders are executed according to the algorithm described above.

Connect the legs to the table top holders best with tees. For greater fixation, the joints can be glued with glue or cement. The construction, assembled from the scraps of PVC pipes, is painted in the desired color. The glass can be glued to the holders to prevent it from slipping. Although the table top made of wood will be quite appropriate in this model.

In general, a lot of other useful and beautiful things can be made from pieces of polypropylene pipes, it is only worthwhile to think carefully and apply your skills of manual labor and diligence.