Closet with own hands

If there are niches in your house in your house, it will be right to arrange a cupboard with your own hands in order to save the useful space. Of course, this occupation is quite laborious, but real. Since the niche often has non-standard sizes, it is not possible to just buy a cabinet in a furniture store. Built-in cupboard provides for its location from the floor to the ceiling, and the width will be determined by the width of the niche. Making a closet with your own hands here will be reasonable and effective.

So, let's go directly to the question of how to make a built-in closet. First of all, you need to remove the dimensions of your existing niche (height, width, depth). It should be noted that the dimensions should be removed with maximum accuracy.

The next, important point is the design and production of drawings. In fact, the internal filling of this kind of furniture depends only on your personal desires, but I want to say that your future wardrobe should be both a place for storing outer clothing, and have shelves for storing it.

For the production of drawings you can use specially created for this software, or do it manually, drawing your future furniture on a piece of paper. But it should be noted that the shelves of the cabinet decrease in depth by a distance that is equal to the width of the upper guide of the sliding system. As a rule, this is 90 mm. The advantage of the software is that you instantly get not only all the necessary parts sizes, but also that the program will show you where and how to fix the details.

Next, we determine the material for the cabinet. Usually, laminated sheets are used for this
Particleboard, which have dimensions (2050 × 1830 × 16 mm). Sawing DSP, and produce adhesive edge material is best in enterprises that specialize in this kind of work. You can, of course, cut the chipboard and glue the edge yourself, but trust me, you can not make parts of this quality, as will special machines for gluing and sawing the material.

Creating a closet with your own hands, we should not forget about the sliding system to it, which can also be ordered at these enterprises. At the order it is necessary to consider some nuances: the width of the sliding system will be the width of the niche minus 32 mm, where 32 is the thickness in the sum of the right and left sidewalls of the furniture. If the cabinet does not have a top and a bottom, then the height of the sliding system will be equal to the height of the niche, but if there is a "bottom" and "ceiling", then it is necessary to take 32 mm from the height again.

After obtaining all the necessary details, you can begin to assemble the cabinet. First of all, with the help of confirmats, we connect the bottom, the roof and the sides of our structure. The role of the bottom and roof can be played by the upper and lower shelves of the cabinet. This is provided that you have a sliding system attached to the floor and ceiling. To make holes for confirmations you will need a special drill, which can be purchased in any construction shop. After assembling the case, install it in a niche. We further strengthen the shelves in our design. You can do this in several ways: using shelf holders or metal (plastic) corners. The end result of your work will be the installation of a sliding system. To do this, attach the upper and lower guides and insert the doors of the compartment into them.

That's all, the wardrobe with their own hands is made and installed - and this does not require much time and money.