Broken roof mansard with their own hands: useful subtleties

The uneasy construction of the roof skylight makes it an uncomplicated task. But the efforts are justified by the fact that the result is a very beautiful and practical construction. The space under the roof can be used as a living room. The main thing is to correctly draw up a project and choose high-quality materials Both for the construction of the roofing system, and for roofing.

Broken roof mansard: a drawing of the future structure

Starting work without a design stage is by no means impossible. In addition, not every house is suitable for a roof of this type. Its width should be large enough. Harmonious broken roof skylight with their own hands will be obtained only when the base is at least six meters. Beforehand, calculate the parameters of all the necessary elements, so that when assembling them you can assemble them into ready-made modules. The assembly of the rafter system from these blanks is easier and faster.

Composite elements of the structure

You will need high-quality, flame-retarded wood for the manufacture of such elements as Mauerlat, rafter legs, braces, laths with a control grill, skate. It is desirable to choose a tree of coniferous species. For crossbars, rafters and mauerlata, you will need a bar, and for the remaining elements you will have to get an edging board. In addition, for the crate will require small wooden slats. For fasteners, steel brackets, galvanized self-tapping screws and staples are required. Finally, you should think about the material for the roofing, as well as insulation and insulating layers.

Lenticular mansard roof with your own hands: we begin construction

Work begins with the location along the perimeter of the Mauerlat structure. It fixes the side elements of the rafter system. They are connected by the ridge and the upper sections. The corners of the structure are reinforced with dense plywood. After that, the installation of the rest of the rafter legs is started in conjunction with the braces and vertical struts, which ensure the rigidity of the structure. The next stage will be warming. Broken roof mansard should be carefully handled Heat, and also hydro- and vapor-insulated. Then the room will be protected from moisture condensation and heat leakage.

The final stage

From the choice of roofing material depends on how your broken mansard roof will look. It's not every material that gets you to put your hands. For example, ceramic tiles require considerable experience in roofing and finishing works. It is most convenient to use ondulin or bitumen shingles. These materials are quite solid and affordable, and even a beginner can handle the installation. Slightly more difficult to trim the roof with soft tiles. For the device of other types of coverage it is better to use the services of a qualified specialist to protect yourself from leaks and mistakes. After all, incorrectly stacked material can lead to the destruction of the entire structure.