Metal punching: features, advantages and methods of application

One of the most popular types of rolled metal is die cutting, or in another way metal punching. This is the waste material left after pressing production. Initially, die cutting is plated with copper or brass, so the products from it serve long enough.

This is one of the materials for arranging a variety of objects. For example, for fencing a private country house, giving. What's important, mount structures with the use of die-cutting are very simple and easy, so you can make them yourself, without outside help.

Material Features

Method of manufacture - drawing out of steel. Hot-rolled sheets produce sheets of 40-60 mm thick, 15-20 mm cold-rolled, and 7-8 mm thick galvanized sheets. The next stage is pressing, which makes it possible to obtain sheets of a large plane capable of withstanding deformation. The use of such a method of production and its wastelessness make it possible to obtain more affordable material.

In preparation for use, the metal cutting does not need any treatment, but after the construction of the necessary structure, for example, of the same fence, it can be painted so that the metal does not begin to oxidize from the effects of moisture in the sediments.

Although felling is a production waste, the designs made of it are durable and capable of withstanding long service lives.

Benefits

Die-cutting metal, and then products from it have a mass of important characteristics. These include:

1. An extraordinary sight.
2. Low cost.
3. Security.
4. Variety of patterns of perforation.
5. Simple installation.
6. Reliability of construction.

The advantages of the material include the fact that the sheets do not have any stitches or cracks. In addition, the composition of the material does not include formaldehydes and other harmful to humans volatile chemicals. Conclusion: Metal cutting is one of the alternative materials that can create an excellent competition for expensive analogues.

Methods of application

Many consumers prefer to purchase this material because of its versatility, since it is possible to use die cutting in many cases:

1. As an alternative to the grid-rabitsa.
2. To create additional ventilation under the fence.
3. Reinforce the foundation.
4. To strengthen the brickwork.
5. For the manufacture of steps of stairs.

Such a wide variety of applications is caused by the difference in production, based both on the thickness of the sheets and on the type of equipment - it can be sheet (suitable for fences) and roll (convenient for reinforcement).

Options

The dimensions of the sheets are very important in the event that a metal notch for stairs is used. In this case, it is necessary to observe certain geometric parameters in the following points:

1. The maximum deviation in the dimensions of the sheets along the length is ± 25 mm, and the width ± 10 mm.
2. The torn structure should not take place on the sheets.
3. If a non-cutting area is planned on one side of the sheet, its width must be agreed with the customer in advance.

Marching staircases, in the construction of which a metal punching was used, are considered the most convenient and are therefore erected everywhere. In addition, their installation allows you to save space in the room. With regard to structural features, ladder products are of the following types:

1. With the strings. So called inclined beams, located along the details. They are the basis of the bearing side. The end elements of the march in such products are closed with strings.
2. With Kosovars. The form of the elements is sawtooth, so that you can stack steps on them.