Anti-slip lining on the step. Anti-slip rubber profile

The climatic conditions in our country are such that the formation of an ice crust on the staircase is almost inevitable. In the construction of modern shops, offices, other public institutions are often used such decoration materials, as marble, granite, ceramics. Under the influence of rain and snow, the surface becomes too slippery and traumatic. Therefore, it is necessary to use anti-slip overlays on the step. Any store owner caring for his customers will never save on this important element.

What are anti-slip pads?

This product is a strip of elastic material, fastened to a metal base. The overlay is mounted simultaneously during or after the lining. This important supplement of the interior performs a protective function, protecting people from injury even on the steepest and slippery steps. In addition, such thresholds protect the steps themselves from chips, scratches and other damages. The material from which they are made, is resistant to the effects of fire, sunlight, temperature changes, is not afraid of extreme weather conditions.

Main functions

Anti-slip lining on the stage is used primarily to ensure the safety of people climbing or descending on them. But this is not their only destination. They significantly reduce the amount of dirt entering the room. In addition, the anti-slip profile for the steps also performs an aesthetic function, since it has a rather beautiful and stylish appearance. Thanks to this, the stairs look more attractive. The modern market offers a wide range of coatings for the steps, which makes it possible to pick up the overlays, combined with the interior of the store, salon or office building.

Varieties

Most of the existing diverse coatings are structurally different from each other. Of natural rubber , rubber anti-slip lining on the step. They can be flat or angled and easily installed.

Combined strips of aluminum and plastic are attached using screws or glue. They are larger, so not every interior can fit.

Very popular in recent years, anti-slip tape with an abrasive top layer. Despite its cheapness, such coverage is sufficient for a long time.

Anti-slip rubber covers

To ensure complete safety when moving people on a slippery surface, the manufacture of linings requires a particularly elastic material, the most anti-slip. Most often used rubber anti-slip overlays on the step. The polymer from which they are made is characterized by resistance to sharp temperature changes, while retaining its elasticity even at 50 degrees below freezing. Rubber is pressed under the weight of the human body, creating an obstacle to sliding. Some models also have the ability to self-clean from ice. When deformed, a thin ice film breaks, preventing the formation of ice.

Advantages of the profile for stairs

The coating has excellent damping properties, which directly affects the convenience of movement. Anti-slip lining on the steps are distinguished by wear resistance, durability and attractive appearance. They are performed using a special technology on high-quality equipment with the use of environmentally friendly material, which allows them to be used in children's institutions, swimming pools, shops and private homes. A wide range of colors makes it possible to choose the appropriate elements in size and color.

Qualitative lining for steps can prevent the slightest slip in all weather conditions. In addition to its main function - safety, the anti-slip rubber profile serves to protect the surface of the steps from abrasion and chipping. It is quite easy to install, securely fixed, and also has the ability to dismantle without damaging the steps.

Aluminum profile

Combined anti-slip patches on the steps are an aluminum strip with a rubber insert having a rippled surface. Such a covering can cover only the upper part of the steps or be secured in the form of a corner, protecting and their side side. The overlays perfectly cope with the anti-skid function, providing excellent grip on the shoes. The aluminum part serves to fix the product, which is carried out using a dowel-screw. Drilling is required for installation. As a result of wear, the rubber insert is replaced with a new one, so this coating can last a very long time. This is the most reliable anti-slip lining. On wooden steps they are attached without much difficulty.

Mounting technology

1. The part should be placed on the steps and, if necessary, cut the profile to the size using a metal saw.
2. Then through the fixing holes make a notch on the bottom of the marker.
3. For these marks, drill holes with a perforator.
4. Apply a silicone sealant to the bottom of the profile.
5. Place the product on the stage in such a way that the mounting holes are aligned.
6. Insert the dowels and fix the whole structure with screws.

Self-adhesive pad

It is a flexible elastic plate, on the lower surface of which there is a powerful adhesive layer. Can be L-shaped or be in the form of a tape. Anti-slip patches on the steps (self-adhesive) are made of a special material with plasticizing additives. This coverage is considered one of the best. Beautiful design, a large selection of colors allow you to make the stairs both safe and beautiful. The surface of the coating does not hamper the process of wet and dry cleaning, so it is not difficult to take care of it. Reliable fastening of the product makes it safe to move on any smooth surface, whether it's marble, tile, ceramic or metal. The installation is so simple that it is completely possible to implement it yourself. The great advantage of this profile is that it can be installed anywhere where such a need arises.

Stages of installation of a self-adhesive overlay

The surface must be thoroughly cleaned of dry contaminants, then wipe with a damp cloth. After drying, mark the place where the installation will be carried out. If the surface has irregularities or cracks, it must be primed. To do this, the primer is applied in a thin layer to the place of installation. After it dries, you can proceed with the installation of the lining.

First, the protective film is very carefully removed , and it is important not to touch the adhesive layer with your hands. Remove the film gradually, tightly pressing the coating to the surface. If the laying is done on the surface of granite or tile, then having removed the protective film completely, you need to bend the product in half, holding it by the edges, and, aligning the middle of the lining strictly in the center, press it against the surface.

Then the coating is smoothed in the direction from the center to the edges with a spatula or rubber roller. Caring for self-adhesive film is quite simple. It is enough to sweep the brush off of it and wash it with any detergent.

If the pads are selected and installed correctly, they will serve for a long time, not only performing the safety function, but also in a certain way being an ornament.