Which plaster is better for the facade: advice on choice and reviews

External finishing of buildings of any purpose may be needed not only to give the facade a more aesthetic appearance. In some cases, such work is also carried out to improve the performance characteristics of the material. Most often in recent times for these manipulations is chosen plaster, which acts as one of the most economical and practical solutions.

Features of facade plasters and consumer reviews

When choosing a material for finishing the facade, you should prefer one that has protective functions. This is necessary in order to ensure that the walls after finishing are reliably protected from negative external influences. If you are thinking about which plaster is best for the facade, you should be aware that this compound should be resistant to temperature changes. In most regions of Russia, the seasonal temperature difference is quite large, so this characteristic is of great importance. Consumers also argue that moisture resistance is important to them.

Primary requirements

When purchasing plaster, you should know that the composition is able to reliably protect against precipitation and high humidity, which adversely affect unprotected grounds. If you are concerned with the question of which plaster is better for the facade, then it is worth to ask whether it has a vapor permeability. Without this, the walls will lose the ability to let steam out of the rooms outside, excluding the possibility of breathing. If mixtures are used that do not have similar characteristics, the internal surfaces of the walls are quickly covered with mold and rot. It is important to pay attention to heat, as well as soundproofing properties.

Quality of heat and sound insulation

The plaster layer applied to the surface should create an additional barrier to penetration of cold air and noise inside the premises. Buyers say that using such mixtures, they get a comfortable microclimate in the premises of a residential building. The plaster composition should have one more characteristic, which is expressed in the ease of application of the solution. If you are interested in the question of which plaster is better, it is recommended that you read the selection tips presented in the article.

Textures and colors

Everyone wants a dwelling to look aesthetically pleasing, so consumers try to pay attention to the plastering compositions of those producers who provide a large assortment of textures and colors. This allows you to create a variety of coatings. Important and low cost, which goes along with excellent quality. However, you should not save, because the external walls of the house are exposed to negative effects, which can turn the material into unusable for use. The need for a second repair will certainly cause additional costs.

Types of facade plaster

If you are thinking about which plaster is better for the facade, then you need to consider several varieties, each of which has its own properties, pluses, and minuses. These characteristics are due to the difference in composition. Coatings can differ in the technology of application, this you should pay attention to before the time of purchase.

Features of mineral plaster

If you decide that you will use plaster for the facade, which is better, you need to determine in advance. Mineral plaster is often used in repair works. It is considered a traditional finish and is made on the basis of cement. It is loved by consumers for the fact that it is very economical.

Among the positive features of this material can be distinguished high strength, which, among other things, increases with time. In order to give the surface quality of moisture resistance, mineral plaster is enriched with additives.

However, it is important to pay attention to the disadvantages, one of them is expressed in a rather scarce color scheme. However, after finishing the facade with such material it can always be painted in any desired color. Such manipulations in general can be made at least every season.

If you are thinking about what kind of plaster is better for the facade, then you need to pay attention to one of the most common plasters, called mineral. It is realized as a dry mixture, which must be diluted with water before use. The manufacturer can not violate the proportions. This may cause the application process to be complicated, and the material will lose its performance characteristics.

Characteristics of acrylic plaster

If before you there is a question on what plaster it is better to plaster a facade of the house, it is possible to get acrylic composition. It allows you to create a decorative surface. All kinds of resins are used as the binding base of this mixture, while the presence of special additives allows to ensure the quality of vapor permeability. Such formulations are extremely resistant to temperature variations, as well as to high humidity.

If there is a need to protect the building from mold and harmful microorganisms, then it is worth choosing this particular composition. Among the additives of this mixture can be all sorts of ingredients that allow you to get surfaces with interesting textures. For example, in private consumers plaster "Coroed" is quite common, which mimics the base, eaten by insects. Before use, this composition must be mixed well.

Description of silicone plaster

If you are thinking about what kind of plaster for the facade to buy, you should definitely read the tips that are presented in this article. Among the plasters presented on the market of building materials, you can also highlight silicone mixtures. They are considered the most expensive options for finishing, but you can be sure of their quality characteristics.

Among other things, this composition is considered universal. The described plaster is made on the basis of polymer compounds, which allows creating a surface that is able to protect the building from all kinds of influences. In this case, the walls will retain their original appearance. This indicates that you do not have to spend money on repairs for a long time. This is very much to the liking of private consumers who choose silicone compounds, if they do not want to update the facade in a few years.

If you are still thinking about how to choose a facade plaster, the tips presented in the article will help you. So, it is worth paying attention to the fact that the silicone composition creates a surface that is characterized by excellent dirt-repellent properties, among other things, the construction does not lose the ability to breathe, releasing couples from the premises. This excludes the occurrence of harmful microorganisms, fungus and mold. Another advantage of this decoration is a wide range of colors, which allows the consumer to find any color that can match the exterior. If there is a desire and skills, you can even create facades by combining plasters of different colors. Among the only drawback is only high cost.

Description of silicate plaster

So, you will use plaster for the facade. Which is better? This you must decide before the moment of going to the store. Do not make a decision until you have studied the entire product range. It should be noted also silicate plaster, which is made on the basis of liquid glass. Such a composition has many advantages, among them one can distinguish an excellent vapor permeability, so that moisture does not linger on the surface of the walls, but freely flows outward. Experts advise using this composition for finishing buildings, which are built of porous materials, among them can be isolated aerated concrete.

The mixture has plasticity qualities, this ensures ease of application. After drying, the coating acquires a dirt-repellent properties, which is extremely important if the construction is close to the road. It is also important to decide which grid is better for the facade plaster, since it will determine the strength of the coating. It is important not to choose steel for the facade.