Which is better: a well or a well for a country house

When buying a summer cottage there is a question of water supply. Special companies conduct geological exploration of the site and offer different source options. Which is better: a well or a well for a country house?

The advantage of drilling is that the water in it is cleaner and better than in the well. The neck is smaller than the well, and therefore there is no debris, and microorganisms do not multiply. The well has a larger volume of recoil, since it is drilled to the ground, interstitial and pressure layers. Groundwater is cleaner, but in places environmentally unfriendly they are unsuitable.

Which is better - a well or a well, and how often do you need to clean the water? Doing this is not necessarily regular. If the filter is installed correctly, it is much easier to operate the drilling rig than a well. Several times a year it is disinfected: clean the walls, wash and analyze the source.

Which is better - a well or a well - on the replenishment of resources? Everyone knows cases of drying wells, and new water is steadily entering the artesian well . And the main thing that you pay attention to when choosing a source is that the drilling is cheaper than digging a well.

The main advantage of the wells is that when the light is switched off, the wells do not work, since they mainly function on electric pumps. Therefore, in places with interruptions of electricity, the question of what is best - a well or a well - is not worth it.

During the construction of the drilling take the pipes of black and galvanized metal. They are connected to each other or welded. Water comes through filters that are on the end of the pipe. With occasional use, the drill filters are silted. The well on the site is filter and artesian. If the sand drilling rig is properly operated, it will serve 15 years. It is relatively inexpensive, but in 3-4 days after its installation it will be necessary to conduct laboratory studies to identify the quality of the source.

Artesian drilling is more productive; It can provide water even a few houses. Such water is considered to be the cleanest, as it is extracted from layers that are not contaminated. It must be cleaned only of iron and increased rigidity. That's why they put water treatment equipment. In order to drill a well, rotary equipment is used. Works can be conducted for 5 to 10 days.

At what depth it is necessary to dig a well and how many rings are required, it is possible to determine it by neighboring sources or by ordering geodetic surveys. Wells are usually digging to the depth of the aquifer. Typically, this is 5-30 meters. They are conditionally divided into 3 types, depending on the depth: imperfect, perfect and perfect with a sump. He is digging in the form of a vertical shaft. On the walls are tubular and shaft wells with wooden, brick or reinforced concrete walls.

Conclusion

So what is more preferable in the area: a well or a well? It is difficult to answer this question unequivocally. Having weighed all the advantages and disadvantages of water sources, each is guided by personal criteria.