Replacement of risers: what you need to know?

If you are interested in replacing risers, as they spoil the design of the room or rot, you should first determine what material will be used. In addition, it should be determined whether you will be plasterboarded or tiled.

In houses of old construction, water supply pipes are mostly not in niches, but in modern new buildings they are sheltered in special depressions. Usually a hot water riser is placed in the bathroom or in the toilet in sight. This allows you to get easy access to it. Replacement of the risers may well be made using polypropylene pipes, which have recently been used more and more often. First of all, it will be necessary to agree with the neighbors from below and from above, so that you have an opportunity to crash into the pipe. If they do not agree, you should leave access where the connections between the metal and plastic pipes will be located .

Replacement of cold water risers is made using polypropylene pipes, and for the hot one it is possible to use a stability that does not lend itself to any deformation under the influence of high temperatures, and also have a long service life. If you have already replaced the water supply, then there will not be any problems with the replacement of the risers. It will only be necessary to select a suitable nozzle for the soldering iron.

So, the replacement of risers of water supply can be started. If you managed to reach an agreement with your neighbors, you should look at the pipes they have. If their riser has already been replaced with plastic, then there will be no problems with the connection. You need to take an eco-plastic soldered coupling, which you need to solder to the pipe. In the event that there is a metal pipe, you can use the help of specialists who will recommend the required adapters.

Replacement of risers can be really problematic if neighbors have metal pipes. First, you should determine in what state they are, because they will need to be threaded. If the communication is badly worn, the pipe may be damaged and burst when threaded. In this case, the services of a welder may be required, which can weld to the end of the thread.

When the connection point becomes clear, you can go to the connection of metal and plastic. This is done using a coupler with an internal thread. On it, you need to wind the flax, smear the investment paste, and then screw the coupling onto the thread. After that, pass the floors from the upper and lower floors, solder the tee in the place of docking with the layout of the apartment. This completes the replacement of the risers.

All this suggests that this task can not be considered simple, because any wrong movement can cause negative results. Replacement of heating pipes is inherently quite difficult task, which can also be solved using a simple set of tools. In this case, too, it is necessary to negotiate with the neighbors so that there are no problems in the process of carrying out the work.