What should be the pressure in the tires of the ATV?

Fans of driving at the wheel should pay attention to the fact that motor vehicles have become increasingly flicker in the reports of accidents. Therefore, it is more serious to take into account the safety standards and the technical condition of the machines, for example, regularly measure the pressure in the tires of the ATV. In addition, this parameter causes proper balancing of technology, traction, normal handling and the integrity of the tread. Quad bike is an off-road vehicle, and the normal condition of the wheels ensures that it works when traveling on rough terrain. Therefore, only optimally selected and competently pumped tires will allow you to enjoy a fast and safe ride.

The strategy of choosing tires for motorcycles

What should I consider when choosing tires for the ATV in the first place? Of course, the tread pattern, which causes adhesion to the road and the stability of the machine both on a straight track and on corners. If you buy used tires, you should consider the degree of wear and tear in them, and the relief. Improperly selected products reduce the maneuverability of transport and its power. It is necessary to know that the ATV tires have a diagonal design, and not a radial one, as in a conventional vehicle. These products are made from several layers of cord, laid perpendicular to each other. The pressure in the ATV tires should be low, thus ensuring the protection of off-road vehicles.

Area of contact of motor vehicles and soil

The pressure in the tires of the ATV provides such an important indicator as a "contact spot". The normal figure determines the optimal size. For example, if the pressure is low, the "contact spot" is large, which means that the protector will quickly deform, the grip on the road weakens, the mototechnics begins to "walk", badly "holds" the terrain and does not obey the driver. If the indicator is high, that is, the camera is pumped, the contact between the ATV and the ground decreases, the level of flexibility of the tire sidewall decreases and the depreciation decreases substantially. Only optimally inflated tires provide high maneuverability, good speed, stable stability, the necessary cushioning and driving safety.

Features of movement along different routes

Whichever way you choose to ride on motor vehicles, before leaving for the track you need to check the pressure in the tires of the ATV. When choosing a trip, you need to understand that when moving through different types of surface you need different indicators in the chambers. Soils can be hard: concrete, asphalt or dense soil. The road can be softer and more mobile: off-road, sand or snow. What kind of pressure in the tires of the ATV is necessary in both cases? When traveling off-road, the recommended values are from 0.35 to 0.83 bar. If there is a trip along the hard road, the pressure should be increased from the nominal by 25-40%. Some drivers in the first case recommend to pump the rear wheels a bit more.

Tire Pressure CFmoto

One of the most popular ATVs is CFmoto. It is often used in various test drives to determine the optimal parameters of certain indicators. That is, at the start, the pressure in the tires of the ATV CFmoto is set according to specifications, and then on the route it is changed and measured. The indices from 1,1 to 1,5 bar proved to be optimal for movement along the asphalt both for better maneuverability and for rubber wear. The rolling resistance on the road has decreased. But on the off-road sections of the meeting with irregularities felt much more rigid. In general, the pilots concluded that if the majority of the route runs along a dense surface, it is better to maintain high pressure in the chambers .