Welding electrodes "Monolith": characteristics and reviews

The Russian company Monolit produces electrodes of various types. To date, there are models with cellulose as well as rutile coating. For arc welding, they are ideal. The diameter of the model is different. It is also important to note that some brands are used to work with carbon steel.

If we talk about the parameters, the nominal voltage of the electrodes is on average 50 V. The deviation is allowed in this case at 5 V. Electrodes are sold in small and large packages. On average, a pack of 2.5 kg will cost the consumer 600 rubles.

"Monolith of the RC"

Electrodes "Monolith RC" are suitable for butt joints. Their characteristics are as follows: a temporary resistance of 340 N per square meter. Mm, the minimum angle of inclination is 35 degrees. It is also important to note that a rutile coating is used in this case. The maximum angle of the electrode is 70 degrees.

If you believe the opinion of specialists, then the consumption of this brand is insignificant. The diameter of this electrode is 3 mm. Its relative elongation is at 22%. The sensitivity to contamination of the brand is insignificant. It is also important to mention the high deposition rate. Electrodes can be used to work with the pipeline. They are sold in packs of 1 kg, and ask for them about 340 rubles.

Comments about ANO-4

These electrodes "Monolith" reviews from buyers receive good. This grade is often used for working with carbon steel. For surfacing, it can also be applied. The consumption of the weld metal in this case is low. The maximum deviation of the nominal voltage for reverse polarity is 5.5 V.

Coefficient of surfacing at the electrodes does not exceed 6 g. However, they still have flaws. First of all, this concerns high sensitivity to rust. Also consider the small angle of the electrode. To work with the pipeline, this mark is not allowed to be used. You can buy electrodes in packs of 1.5 kg for 450 rubles.

Characteristics of electrodes "ANO-4i"

These monolith electrodes have the following technical characteristics: a 23% elongation, and a temporary resistance of 350 N per square meter. Mm. The diameter of the presented stamp is 3 mm. The minimum angle of inclination of the electrode is 30 g. In this case, a rutile coating is used. Its thickness is 1.2 mm. Ceiling with the help of the presented brand is good. The maximum deviation of the rated voltage does not exceed 7 V.

The opinion about "АНО-6"

These electrodes "Monolith" (manufacturer - Russia) are designed for arc welding. With carbon steel, the brand handles perfectly. If we talk about the parameters of the product, it is important to note that the diameter is 3 mm. For surfacing these electrodes are rarely used. Work welder is able in any position. The parameter of temporary fracture resistance does not exceed 50 MPa. For structural steel, electrodes can be used. They have a coating of a mixed type.

Of the disadvantages, it is important to mention the strong spattering. If you believe the reviews of buyers, then for vertical welding, the brand fits well. Heat resistant steel is allowed to work. However, the consumption of weld metal at the electrodes is very significant. The rated voltage of the mark with reverse polarity is 52 V. Ceiling seam with the help of electrodes is obtained excellent. It is also important to note a slight deviation of the nominal voltage with reverse polarity. This figure reaches a maximum of 4.5 V. These electrodes are sold for welding "Monolith", as a rule, in packages of 1 kg. In the market for them, on average, from 250 rubles.

Description of the model "МР-3"

The presented electrodes are intended for arc welding. In some cases, they are used to work with carbon steel. If you believe the feedback of buyers, then for surfacing they are ideal. However, the parameter of the temporary fracture resistance is insignificant. In this case, spraying is not strong. For structural steel, the grade can be applied.

The permissibility of overheating of the electrodes is within the normal range. For heat-resistant steel is not allowed to use them. If you believe the opinion of experts, this brand is distinguished by a large indicator of the nominal voltage at the level of 45 V. You can buy welding electrodes "Monolith" in packs of 2.5 kg, and they cost about 550 rubles.

Parameters of "ANO-36"

These monolith electrodes have the following characteristics: diameter 3 mm, consumption - 1 kg of product per 1.7 kg of metal, deposition coefficient 9 g. In this case, the maximum deviation of the rated voltage does not exceed 4.5 V. The coating thickness is 1.2 Mm. The nominal voltage for reverse polarity is 55 V. For working with the pipeline, these electrodes are not allowed to be used.

If you believe the feedback of buyers, then the ceiling seam with their help turns out excellent. For DC operation, they can be used. However, a metal of great thickness is not allowed for welding. While working with structural steel, spraying is quite large. It is also important to mention the sensitivity of the brand to rust. You can buy electrodes at a price of 500 rubles.

Reviews about the brand "ANO-21"

These electrodes "Monolith" for surfacing are ideal. However, they are limited in slope. In this case, a slight sensitivity to rust allows you to work with structural steel. For arc welding, the brand is used frequently. Sensitivity to contamination is, however, it does not interfere with working with heat-resistant steel. If you believe the feedback of customers, then for lap joints, electrodes should not be used.

The maximum deviation for reverse polarity is 5.5 V. The thickness of the coating in this case is 1 mm. The operating voltage at DC is 50 V. The electrode consumption is insignificant. If you believe the feedback of customers, then the slag flowing forward in the arc should beware. To buy these electrodes "Monolith" can be priced from 350 rubles. For a packing of 1.5 kg.

Reviews about the brand "UONI-13/45"

Many buyers respond positively to these electrodes. First of all, it is important to note the low sensitivity to rust. In this case, spraying is small. For short arc welding, Monolith electrodes are used frequently. The sensitivity to rust is insignificant, so it is allowed to work with structural steel. For lap joints, electrodes are often used. Their consumption is approximately 1 kg per 1.56 kg of metal. The surfacing coefficient does not exceed 8 g. In its turn, the nominal voltage with a reverse polarity is equal to 55 V.

The coating in this case is of a mixed type. The limiting deviation with reverse polarity does not exceed 10 V. If you believe the opinions of experts, the brand is often used for vertical welding. To connect the pipeline, it can be used. Separately, it should be noted that the electrodes showed themselves well when working with a ceiling seam. It costs an average package of 1.5 kg around 400 rubles.

Electrodes "UONI-13/55"

These electrodes "Monolith" reviews from buyers receive a positive. First of all, it should be noted that they are used for surfacing metal. In this case, spraying is insignificant. Low sensitivity to dirt allows working with structural steel. For welding with a short arc, the brand can be used. The sensitivity to the preparation of the edges is insignificant. For lap joints, the electrodes fit well. The average consumption is 1 kg of product per 1.4 kg of metal.

The maximum voltage deviation is 4.5 V. The coating of the brand is of mixed type. Electrodes of great thickness are suitable for welding metals. If you believe the feedback of buyers, then when working with electrodes it is important to consider the permissibility of overheating. For pipelines the brand is suitable. The nominal voltage for direct polarity is 55 V. The surfacing coefficient for the brand does not exceed 6 g. Purchase these monolith electrodes in stores at a price of 500 rubles.

Description of the brand "Monolith E38"

Many buyers respond positively to these electrodes. They are used for arc welding. With structural steel, they can work. Spraying in this case is insignificant. For vertical welding, the brand is suitable. The consumption of electrodes in this case does not exceed 1 kg per 1.5 kg of metal.

For butt joints, electrodes are rarely used. The sensitivity to the preparation of the edges is quite high. The surfacing factor in this case is at the level of 6 g. The maximum voltage deviation of the brand is 5 V. The coating in this case is of the rutile type. The maximum angle of the electrode does not exceed 70 degrees.

If you believe the feedback of buyers, you should avoid the slag wicking. The diameter of the presented brand is 2.5 mm. In turn, the indicator of the temporary resistance is 340 N per square meter. Mm. The relative elongation in this case is at the level of 20%. The impact strength of the presented electrodes does not exceed 77 Joules per square centimeter. See You can buy them at a price of 450 rubles.