Update iOS 9: reviews, problems, instructions

Update IOS 9 (reviews can be found at the end of this article), was the subject of the expected debate between users of the "apple" platform. It brought a lot of innovations that have found their practical application, it's a fact. But, on the other hand, any update becomes a potential source of problems. Of course, initially it was completely right to design an update of IOS 9, reviews about which were flooded with the international network, it was almost impossible. Another question is whether we will see whether the firmware will be optimized in the future, and whether minor flaws and major developer errors will be corrected in it. But it's not up to us to decide, but we'll talk about the main problems associated with this update.

Inherited from iOS 8?

The firmware of the eighth version for "ayosa" was called experts absolutely raw. Of course, the optimization is not equated to zero. But, nevertheless, she was somewhere near this mark. Logical can be called a flurry of indignation, which was followed by users of aipads and iPhones.

List of bugs

Among the most common mistakes were regular departures from programs, deleting files from the cloud service. Many owners of iPhones 4c said that after installing the firmware the devices started to slow down. And, of course, you can not avoid the battery. It was discharged too quickly for devices of this class with such technical characteristics. But you just try to imagine one thing: all this in comparison with the shortcomings of the update of iOS 9 seems like a flower. The scale of the problem in such a comparison should be immediately clear to even the most unsophisticated user. And this article was written, in fact, to help users solve at least part of the problems associated with installing the firmware.

"Failed to update software" message

The English name for this failure is Software Update Failed. The error can occur both during installation by connecting to a Wi-Fi access point or when downloading software using iTunes. The possible reason is that at the moment the servers of the company "Apple" are overloaded, and they can not install the update immediately on all users' machines. Therefore, it will be necessary to wait. A new update to iOS 9 can be installed the next time.

First, make sure that your connection to the international network is stable. If there is no problem with the signal level, just wait a day or two, and then try again. A new update to iOS 9 suits far from every user, and rumors about this are spread quickly enough, so, probably, soon the flow of owners of "apple" devices that want to install the firmware will significantly weaken. You can easily download an update to your smartphone due to the weakening of traffic.

Not enough space

A message that the device does not have enough memory to install the firmware appears when you try to download it through a Wi-Fi access point. Actually, here the cause of the appearance is transparent like water. Update IOS 9 for a long time (or maybe not at all boot) in this case, because the device memory must be freed from the presence of third-party files in the format of multimedia.

Let's remind users: in the case of IOS 8, this error caused the device to fall on the so-called recovery loop. But the update of the iPhone IOS 9 makes it possible to temporarily erase certain applications from the smartphone. When the firmware is installed on the device, the programs will return to the device by downloading them from the store. In the rest I would like to note two methods that can be used in the event of such a problem. The first way is to activate the "Allow applications to uninstall" feature. To do this, press the button of the same name. More in that case, you do not have to do anything. The second method consists in selective or full purification of iPhone. This, accordingly, removes the multimedia files and resets the smartphone to the factory settings.

Is iOS 9 updated for a long time?

Often, when trying to update the firmware of users of "apple" devices, the following problem occurs. It seems that the process of downloading the update was started, but it ends with the fact that the corporate logo of the American company is displayed on the screen of the device. A status bar may also be present , but not in all cases that should be noted. So it turns out that users are beginning to ask: "The iOS has hung up when upgrading iOS 9, what should I do?"

The way out of this situation is forced loading of your device. But it does not always help, and therefore one more method remains. This is a recovery of the device through Recovery Mode with the help of aytyuns. We remind you that all multimedia content of the smartphone will be deleted. Return is possible only if you previously created a backup copy of the data in the cloud storage. Let's note that if the button "on the main screen" does not work for your device, and it itself hangs, it is not possible to transfer an iPhone or an iPad to DFU mode .

Problems with data transfer

What should I do if the cellular network does not work after IOS 9 update? Similar errors still occur, but the connection is not based on any standard. This is, in fact, not only about GPRS and 3G, but also about LTE too. However, you can always check whether this is the problem by doing one simple action. This is the connection to the Wi-Fi access point. If it works, then we continue to deal with the problem as follows. First, restart our "apple".

The cellular data switch, which is located in the menu (the section "Cellular communication"), we put into an inactive position, and then we activate again. After that, turn on the flight mode for half a minute. When all is done, reset the settings. This sequence of actions should solve the problem of the impossibility of connecting to the international network due to cellular standards.

IOS 9: "Move for updates"

This error arises quite often, if we evaluate the situation by the number of user questions in various forums. That is why it is important to know how such a problem can be solved. If you see after installing iOS 9 "Move for update", then the following steps should be taken. To start, we open on a desktop computer or laptop aytyuns and connect the phone to the device. We perform the synchronization, and when the update request appears, we give permission to it. When the process is completed, simply follow the instructions on the screen linearly. They will help to carry out a superficial setting of the device after the firmware is installed.

Problem with sending messages

If the iMessage service does not work after updating iOS 9, it will not be difficult to fix the error. First of all, we note that messages can be sent, but the process takes quite a long time. If you are one of the users who installed the new firmware and are now suffering from the problem, then proceed to the next instruction.

Initially, we check whether there is a stable connection to the cellular network. To do this, you can activate the connection to the Internet using a SIM card. We also check how the messages are sent when the smartphone is connected to the Wi-Fi access point. The poor quality of the signal and its low level can influence the data transmission speed of the message.

If the error occurs when you send messages through a mobile connection, perform operations with the slider in the "Cellular" section. That is, disconnect and re-enable the connection. If this does not help, then check whether the subscriber to whom you are sending messages is the user of the corresponding service. Let's admit, all is true. In this case we leave the account. To do this, go to the menu called "Messages." Then go to the "Send / Receive" section. There is already a button on which our Apple ID is written, click on it. Choose an item called "Exit". When the operation is completed, we authorize in a new way. If the above methods did not solve the problem, reset the phone.

Hit iPhone in Recovery Mode

What should I do if IOS 9 does not turn on, and when the device tries to install it, it switches to recovery mode? Note that, in fact, this error occurs after the firmware has been downloaded from the official server. The installation can be interpreted in different ways, but the result is the same: the update does not turn on, and the phone itself is translated into recovery mode. How to deal with this disadvantage? You can immediately see the icon on the screen of a USB and ayoutuns cable. So, what to do in this case? The first point will be forced reboot of our device. Next, we connect the device to a personal computer using the appropriate wire. When this is done, run iTunes on your computer. It should automatically determine that the iPhone was connected in recovery mode. Through the program, we, in fact, do it. This is a simple solution to this problem.

By the way, what can lead to such an error? Users should understand that the update of iOS 9 (reviews about which, to be honest, do not go the best), requires the greatest possible reliability when downloading and installing. This includes a stable connection to the Wi-Fi access point, as well as the absence of factors that could affect the connection of the device to the computer via a USB cable.

If Wi-Fi is not working properly

Many devices after installing the firmware (the date of updating IOS 9 - September 16, 2015) begin to interact with access points Wi-Fi is incorrect. That is, the device simply does not connect to them. What to do in this case? First of all, reset the network settings. After that, we try to connect to a particular wireless network. If this step does not give the expected results, turn on the flight mode and hold our device in this state for ten seconds.

The solution to the problem can be a temporary disconnection of the wireless module. You can do this by going to the menu item called "Privacy." It is located in the device settings. After that we select "Geolocation services", from where we go to "System services". Alternatively, you can change DNS in the appropriate settings. You need to put public Google servers.

IOS update 9. Reviews

As noted earlier, this version of the firmware has a huge number of minor (and not so!) Painful shortcomings. In general, they are solved fairly quickly and simply in most cases ... But many reviews say that it is not particularly worthwhile to hurry up with the installation of the version. Of course, if you want to try it in person, find out what's wrong, you can try. But be prepared for the fact that you will first have to pay attention and time to solve the underlying problems associated with the new version of the operating system.