Timing Belts Gates: reviews. Gates (timing belts): quality, advice on choice

In the engine of the car, every detail is important and requires a lot of attention. The timing belt is one such detail. Considering that this rubber product is subjected to colossal loading under harsh temperature conditions and in an aggressive environment, you understand what the quality of production should be. That's why most of them give their preference to the timing belts of Gates.

This article will discuss the types and differences of Gates products (timing belts), advice on identifying counterfeit products, reviews, applicability and advice on choice. And in order to become quite clear, a little information about the timing belt itself.

What is the timing belt

The main function of the timing belt, or gas distribution mechanism, in synchronizing the crank and camshafts of the engine. In diesel units, it is also associated with a high-pressure fuel pump (injection pump). Earlier in the engines, this role was performed by the chain. Today, there is also a significant share of cars with chain synchronization. Why in the engine on such a responsible place began to use the belt?

To make it clear, consider the main differences of the belt from the chain in the timing of the engine:

• Timing system with belt makes less noise;
• Significant relief in weight in comparison with the chain;
• Cheaper repair of components and work;
• The structure of the timing belt is simpler;
• Belt replacement should occur at least every 60,000 km under normal conditions. Under tough operating conditions, these times are even lower.

The timing belt is an important component of the engine in terms of repair performance in the event of a breakage. The consequences of failure of such a belt at best will lead to the replacement of a part of the valves. At worst - under the replacement will go all the valves, pistons, camshaft and crankshaft. The responsibility for the rubber product is simply enormous. Therefore, its replacement is best done regularly and choose among the products of the most responsible manufacturers. And the best reviews of Gates (timing belts and other products) deserve all the time.

Features of timing belts Gates

Gates has a century of history. In 2017 will be 100 years from the moment when the first V-belt came off the assembly line . Such a long time lagoon the firm lived for a reason. Only the availability of its own research and development center speaks volumes. For today it is the largest supplier of belts for cars and agricultural machinery not only on conveyors, but also on spare parts.

As for the timing belts, here Gates offers products with stringent requirements for quality and reliability. After all, the timing belts operate at high speeds with a large temperature range, while being subjected to an oil effect. So, to the features of timing belts Gates are:

• Application of nitrile in the synthetic material with increased wear resistance and protection against oil and aggressive media;
• Use in the cord - fiberglass, spirally located inside the rubber casing;
• A variety of tooth profiles, precisely aligned with the gears and providing tight grip and quiet operation;
• Availability of a variety of repair kits, including not only a tension roller, but also a special tool, and additional spare parts necessary to replace, for example, pumps;
• Good protection of products from fakes.

Varieties of timing belts

Given that Gates produces timing belts for almost all varieties of cars, it becomes clear their number in the classification. The manufacturer has developed detailed selection catalogs. For your car you can easily and easily find the right timing belt, its reinforced analog, as well as a kit for installation, if necessary.

For cars, Gates offers belts that are completely identical to their own counterparts:

• Conventional quality;
• Enhanced quality;
• Complete with roller or rollers;
• In the expanded set with sealing elements and all important components connected to the timing belt.

In addition to belts with a standard tooth for a particular car, there are varieties with teeth in the form of a trapezoid and a complex shape for different operating conditions.

If we consider the general types of Gates belts, here the variety of shapes and models is even brighter. In addition to the standard type, which has the designation Power Grip, there are:

• Polyurethane belts;
• Bilateral options;
• With cord conveyor type;
• Resistant to paintwork materials;
• Unclosed timing belts of all of the above types.

Are there any downsides?

Positive feedback from Gates, timing belts from which have a large list of advantages, tell us that there are no shortcomings in the products. Is it really? The biggest disadvantage of the goods of a well-known and popular firm is a large number of those wishing to forge it. And when among the reviews there are negative, then with a probability of 90% we are talking about counterfeit products.

The manufacturer's extensive experience in protecting goods against forgery allows the consumer to get his Gates timing belt kit or some other product in proper quality. On ways to protect products can be read on the official website, in the bulletins that are distributed with the goods, and in this article.

How to distinguish the original Gates from forgery?

The popularity of the famous company, together with high quality, and therefore with good demand, always attracted those wishing to forge the same timing belt Gates. How to distinguish a fake? Ways to determine whether the original is before your eyes or counterfeit, several, and approaching the process of revealing the truth follows systematically.

First of all, it is necessary to pay attention to the packaging. Gates is very responsible for this issue. All timing belts are packed in cardboard packaging. If the goods are not packed, it is 100% fake. The cardboard is used only for the recyclable type, and the paint does not contain any solvents. That is, the cardboard should not be covered with a bright glossy picture. Information on the applicability and the article number of the timing belt is made in the form of a label, not printed on the package.

Holographic sticker or Holospot from Gates has complex protection in the form of multilayered, special code and proper holographic inscription. Also in the original packaging must contain a sticker to fix the mileage at the time of replacement. The falsification of the timing belt Gates under such conditions is much more complicated.

The next moment, which should be paid attention, will be marking on the belt itself. At the plant, this information is applied in a white color. Here, too, there are three points that can point to counterfeit:

• The country of manufacture must be registered;
• The five-digit number is the same throughout the belt;
• Figures from the right edge on the markings should go upward in the rise.

The attractiveness of timing belts from Gates

It's time to figure out why the reviews are so good. Gates (timing belt) creates products with many advantages, among which it should be noted:

• High abrasion resistance;
• The development of the entire required period with a reserve in the conditions of an aggressive environment and large temperature intervals;
• Noiseless operation, thanks to precise selection of teeth and softness of the material;
• The colossal resistance to stretching due to fiberglass in the cord.

The fiberglass that is used in the timing belt cord, on the one hand, increases stability and resistance to stretching. But there is a downside, or rather a shortcoming. This belt increases the risk of rupture during jerks. Therefore, for a car with such a belt is contraindicated "planting" with a pusher.

Due to the large flow of goods turnover and the release of numerous shipments, Gates allows itself to retain the acceptable value of its goods. And the timing belt Gates, whose price can be 900 rubles, is a common picture on the market. And the program of inspection and quality control of products keeps the brand of a worthy competitor.

Gates Achievements

Among the most popular achievements is the story of the almost century-long release of the first belt, as well as the availability of its own scientific center. The company is constantly accumulating information, as well as finding and resolving issues with quality and reliability of materials. Thus, developments in the field of rubber products led Gates to the RTI market in the areas of cooling and air conditioning systems.

The company successfully patents all its achievements and inventions. A consistent approach to the development and implementation of technical solutions led to the expansion of production to 70 factories around the world. Thousands of jobs and universal fame are the well-deserved price of Gates. Almost every 2nd replacement of the timing is with Gates products.

Reviews of timing belts from Gates

Most users of Gates products express a common opinion about high quality and low price. On the well-known "Otzovik" there was only one opinion about the short period of operation. In this case, no one checked whether it was about Gates, or whether a person just got a fake.

Many people like simple, but functional packaging. Others are attracted by a huge range of the company's products. Interestingly, such a large choice among Gates timing belts for cars makes up only a small fraction of all the company's products represented in the world markets. A much larger volume falls on belts for agricultural machines and various industries.

Applicability of Timing Gates

In order to occupy the maximum niche in sales, Gates produces belts and timing kits for the entire range of cars, both passenger cars and trucks. Products are delivered on conveyors of such famous brands as:

• Ford;
• Audi;
• Volkswagen;
• General Motors;
• Chrysler;
• Toyota;
• Nissan;
• Opel;
• Renault;
• Fiat and a number of others.

Not ignored by the popular Scania, MAN, Iveco and, of course, Mercedes-Benz. Thus, the replacement of the timing with the Gates set will take place in the models of the above-listed car manufacturers as if clockwork.

Completeness of timing belts

Along with the timing belts, Gates offers the customer options for a complete system replacement, which includes one or more rollers, mounting bolts. Such repair kit GРМ Gates has the designation PowerGrip and is packed, as well as all production, in an individual box with the instruction of an article and applicability. Without fail, the kit contains an assembly instruction and a sticker to indicate the mileage.

There is also a variant of expanded completeness of the timing change. Such sets are called PowerGrip Plus and can contain, in addition to the belt itself with rollers, various o-rings and seals necessary for replacement, and sometimes a water pump assembly. The pump is included in this kit only in case of a recommendation for replacing the timing of the car manufacturer. It should be noted that the tensioning roller can go both in the composition of the tensioner assembly, and separately, again, on the recommendation of the manufacturer of the equipment.

Nuances of installation

Replacing the timing belt on most vehicles involves a different timing. If, for example, Renault Logan recommends changing the belt for 60 thousand km mileage, then many Volkswagen this period - 120 thousand km. Sometimes the manufacturer limits the service life to a time frame, which also makes sense. Therefore, the recommendations of Gates in this regard do not contradict the car manufacturers. Even if the Gates timing belt is reinforced with a large margin of safety, it should not be checked for a maximum period of its service life.

In any case, the timing belt replacement is recommended in conjunction with the associated elements, that is, at least, rollers and tensioners. In the Gates packages, there is always a replacement instruction. Observing all the recommendations and having experience or skills, to make the replacement of the timing you can easily.

Instead of concluding

Gates belts Gates are considered to be one of the best and are valued at the level of original components. A large assortment, the highest quality and reasonable prices provide only positive feedback from Gates. Timing belts always have a package with anti-counterfeiting protection and are recommended by many car manufacturers.