They are traceable on two spokes with a pattern. Scheme, description, pattern selection

Of particular importance for home comfort and comfort are a variety of slippers. They are important in the case when the floor in the house is cold. Such shoes help to avoid hypothermia and, therefore, cold. Many needlewomen are looking for an answer to the question of how to knit slippers are tracked.

Tools and materials

To work on the traces, you must choose the right yarn and knitting needles. Nitochki should be selected especially carefully. They should be strong, not bear and have a strong color, resistant to molting. When knitting slippers, it is also important to pick up yarn that will not stick and slide. That's why pure wool for this is not very suitable. It's much better to use synthetics.

The scheme of the tracks with spokes determines the thickness of the tool. For knitting fishnet slippers, you can take thick knitting needles, for the denser ones it is better to use thin knitting needles. Depending on the type of knitting, circular knitting needles with a line or straight lines can be chosen. The tracks are often knitted, like socks, on five spokes.

You need a hook to decorate the edge of the product. To seal the seams and to hide the ends of the threads, you need a thick needle. There are variants of knitting traces where as a sole is used felt, leather or even the bottom of old worn sneakers.

Decoration

There is a huge amount of advice on how knitting is done with knitting needles. With the description of problems usually does not arise. A huge space for imagination is represented in the creation of design, as well as the decoration of ready-made slippers.

You can use embroidery and buttons. Many make elongated tracks, in the form of home boots. Slippers with a ribbon fastened around the ankle are very popular. People with a sense of humor are delighted with the traces in the form of human bare feet or paws of an animal.

Those who want to make a surprise for the child, you can advise you to look for ideas on how the creative knitting of the tracks is carried out with spokes describing. It is important to rely on the preferences and hobbies of children. It is possible how to create a unique design with the help of additional details, and, with maximum effort, to untie stunning things.

Boys usually get excited by all sorts of techniques. They can tie slippers in the form of cars, tanks or airplanes. Girls like a variety of animals - rabbits or kittens, as well as ballet pointes or princess shoes. Parents with a sense of humor love to put on kids unusual booties. These can be knitted sneakers, sandals or even skates.

Footprints on the finished sole

To home slippers were more durable and worn longer, knit them best on ready-made soles. It can be cut from felt or leather, or you can take the factory sole from the worn-out sneakers.

In any case, work should begin with a hole puncture around the perimeter of the workpiece at a distance of about half a centimeter from each other. After this, hook the air loops by tying the sole. When this work is done, you can begin to bind the tracks on two spokes with a pattern.

To do this, raise the 4 loops in the front of the sole. Next, the usual knitting begins with the facial smoothness. The only condition at the end of each row is to introduce into knitting one loop, raised from the harness, which is made by crocheting.

After a few rows on the middle hinges of the top of the slipper, you can begin to tie any pattern you like. As soon as the lifting reaches the required size, knitting is transferred to a circular knitting. For this, all the remaining loops of the sole bandage are raised and distributed to 4 spokes. So goes on in a circle. After reaching the required height, the hinges are closed.

Knitting on two spokes

Today you can find a huge number of models of knitted slippers for the house. However, most of them require handicraftsmen to have sufficient experience. Those who do not have much of it yet can be advised to tie the tracks with two spokes for beginners on the basis of a sufficiently detailed description.

Such slippers are knitted with threads of several colors. Therefore, for the manufacture of such tracks, you can spend unnecessary thread residues. The main thing is to divide each glomulus in half so that the slippers are the same.

Knitting begins with a set of loops in the amount of 42. After that, 8 rows of garter stitching are performed (that is, all the loops in all rows are knitted with facial). Next, we divide the knitting into 3 parts: 11 loops around the edges and 20 in the middle. After that, a contrasting thread is introduced into the knitting, which only the middle loops are tied. If there is a desire to eventually get a trace on two spokes with a pattern, it is necessary to perform it here. You can choose one that is understandable and familiar to the needlewoman.

As soon as the length of the knitted fabric is equal to the distance from the beginning of the ascent to the little finger, the contrasting thread is removed, and the main thread is sewn loops along its sides. It is most convenient to do this on the spokes with a fishing line. On the middle hinge we make a toe. For this, partial knitting is used. That is, in each row it is necessary not to connect the 2 loops to the end. As soon as there are 4 loops left on the knitting needles, all the loops begin to be tied at once.

Approximately through 20 rows, which can be performed with threads of different colors in any order, the execution of the sole begins. To do this, knit loops form the side part. On the average, the partial knitting is again accepted, but this time the last loop of each row is tied together with the next side loop.

So they track on two spokes with a pattern knit until all the side hinges end. On the basis of the remaining loops of the middle part, the heel is made. It remains to reduce all the remaining loops around the ankle. After that, the knitting continues in a circle until the desired length is reached, and the hinges are closed.

The beginning of knitting of slippers with a pattern of "Christmas tree"

Original traces with a pattern of "herringbone" look original. On the needles, you need to sew 17 loops with the main color thread. Further work is carried out in accordance with the description. Even (purl) rows are knitted according to the pattern.

The first row is knitted as follows: 8 purlins, nakid, 1 obverse, nakid, 8 purl. Further, odd numbers are performed according to this principle: 8 loops are knitted with the wrong side, the cape is again made, the central part is knitted with facial, then the napkin, then again purl. This should be repeated until the number of loops on the spokes reaches 33.

Introduction of the second color

After this, two glomeruli of contrasting color are connected to the work: at the beginning and at the end of the knitting. Due to this, multicolored tracks, connected on two spokes, will not have broaches on the wrong side. In order that holes do not form when the color changes, threads at this point cross.

The 8 purl loops are contrasted with contrasting color, the main thread of 8 facial, capitulum, 1 facial, nakid, 8 facial, again pass to contrasting color and bind 8 purlins. So gradually added 16 loops (8 on each side). As a result, there should be 49 loops on the spokes.

Now, 16 stitches are combined in contrast color. The middle is performed on the same principle as before, the main thread. As a result, at the end of this step, there will be 65 loops on the spokes. Now the contrasting thread is knitted with the wrong 24 loops. If this step is correctly executed, there will be 81 loops on the spokes.

Solving of the sole

Now it is necessary to divide the knitting into 3 spokes: 32 loops of contrasting color, 17 medium primary and again 32 contrasting. The next step, which should be carried out in order to link the two-spoke marks with the "herringbone" pattern, is the untying of the sole.

For this, only the average 17 stitches are knitted with the main color. At the end of each row, the last loop on the middle spoke is tied together with the first loop on the outer spoke. Gradually, the number of loops on the side spokes decreases. Knitting is continued until the loops on them run out completely. Now it is necessary to type the loops from the extremities and knit by the length of the sole.

Healing of the heel and the final stage

Then it is necessary to untie the heel. To do this, the loops should be divided into 3 spokes and repeat the procedure for joining the loops from all the spokes. In the end, you should get a heel.

Next, all the loops are divided into 4 parts and knit in a circle. After the blinds connected on two spokes reach the desired height, the hinges should be closed.

To help the newcomers cited a scheme of knitting tracks with a pattern of two spokes.

Thus, in the presence of a little skill knit traces will not be difficult even for a beginner needlewoman.