Than to clean an acrylic bath? Tips and Tricks

Not everyone knows how to clean an acrylic bath, because these products appeared relatively recently. This is quite a simple matter, but it is important to observe strict order, and then you will enjoy the result for a long time. They differ from cast iron by their lightness and elegance. Many are even afraid to use acrylic plumbing, suggesting that it is too fragile, since it is light.

To ensure that the bath has long served, retaining its original appearance, it is very important to follow all the rules of its operation. This principle applies to all things and objects, and baths are no exception. Timely care and cleaning will extend the life of this product. One of the rules is not to bathe animals in it. After all, they can leave deep scratches on the cover with their claws. Such damages significantly shorten the life of the bath and disfigure its appearance.

Than to clean a bath

For this purpose, any detergent that has a deep penetrating effect is suitable. You can use the liquid that you clean the dishes, etc. If you find lime stains during the examination of the bath, then simply wipe the entire surface with a dense cloth moistened with a solution of warm vinegar. It is heated vinegar that will help to get rid of the formed deposits. In addition, you can also use lemon juice - it does not damage the coating. Acrylic inserts in the bath should be cleaned with the same means.

Over time, some parts of the product may darken. To remove dark areas, just moisten them with warm running water and wipe well with a dry cloth. From scratches will help get rid of polishing procedure using ordinary mastic. Many also practice the use of automotive or furniture polish.

Before you clean the acrylic bath, remember that you can not use a product containing aggressive chemicals and small abrasive elements. Even in case of difficulties with clearing dark spots, you should not resort to the help of such means as gasoline or acetone. They just spoil the acrylic surface. Than to clean an acrylic bath by such means, it is better to look more effective among those allowed for acrylic. Otherwise, you have to change the whole bathtub.

To date, the chemical industry provides the necessary means for cleaning acrylic bathtubs in sufficient variety. Using such mixtures, you will achieve good results. As a rule, these products are sold in special cartridges, from which they should be sprayed onto the surface of the bath. After they are applied, wait a while and then wipe them with a cloth. If you feel that the solution has remained on the surface, rinse the bath with running water and dry again with a rag.

Before deciding what to clean the acrylic bath, remember those tips that you learned from this article, carefully study the composition of the alleged cleaner, collect as much information as possible, and then draw conclusions and proceed to cleaning.