Than to wash plastic windows of an adhesive tape? How to clear scotch marks on plastic windows?

Scotch tape is a tape on which a layer of glue is applied. Sometimes it can be one-sided or two-sided, fast glued or weakly fixed. This is just an incredibly useful thing in everyday life and construction, but after working with it, sometimes you can face some problems. The most common are traces of glue on the material or scotch residue. Very often it can be observed on plastic windows, and to remove adhesive tape from the surface, sometimes you have to try very hard.

At the moment, you can find plastic literally in any room, as this is a practical and quality material, but in cleaning with it a lot of trouble. And to maintain the original look, efforts have to be made. It is extremely important to approach the issue responsibly, otherwise you can cause irreparable damage to the window. But, knowing some secrets, you can easily cope with this task and do not ask yourself what to wash the plastic windows from scotch tape.

Method number 1

Of course, it's best to remove the scotch immediately, since afterwards it will be incredibly problematic to remove the film without damaging the material. Therefore, it is much better to do everything immediately and promptly. This method can be used if the glue traces are still fresh. On top of the place where the scotch was left, glue a new tape, squeeze it well, then cut it off sharply. When the first time you can not cope with pollution, you can repeat the action. Or you can use the eraser and, on the principle of removing the pencil from the paper, do the same with glue traces.

Method No. 2

For this method you need something based on alcohol, vodka, cologne or pure alcohol will do. Sponge or a soft cloth to soak in the substance, then wipe the contaminated area. But there is one important nuance: it can damage some types of plastic, it all depends on the quality, so first try it on an inconspicuous place.

Method number 3

Cleaners are excellent at coping with scotch marks. Suitable are those that are in the form of a fine crystalline powder or paste. The wet substance is applied to the wet sponge, and the adhesive tape is removed in a circular motion. Only rub it very carefully, as you can leave scratches on the surface.

Also, gels or dishwashing detergents are suitable, they are quite easy to use and absolutely safe. Simply apply to a damp cloth.

You can also use the same tool as for cleaning glass. Sprinkle the stain and leave for ten minutes, after which you can wipe. In the end, wash the window with clean water.

Method No. 4

The detergent can be really cooked and independently, for this purpose it is necessary to simply mix baking soda together with water to make a gruel, this mixture is applied to the contaminated surface and left for a couple of minutes, after which it is washed off with clean water. If there are still traces, then the procedure can be repeated. Thus, the question of how to wash plastic windows from scotch is solved quickly and with the help of those tools that are always at hand at any hostess.

Method No. 5

How to clean plastic windows from scotch tape? If the material is not afraid of high temperatures, you can heat the plastic with a hair dryer or steamer. It is enough to heat only on the edge so that you can grasp and carefully remove the adhesive tape, after the traces of a little more warm up and wipe with soapy water.

A more gentle way of heat treatment is hot compresses, for this you just need to heat the water and soak the towel, squeeze it well, so that no water drips from it. And walk them on the scotch, if necessary, the procedure can be repeated several times. Under the influence of temperature, the adhesive tape must be peeled off, and it can be removed from the surface, if necessary, you can use additional means, such as a spatula.

Method No. 6

How can I clean plastic windows of scotch tape? There are also less budgetary, but more effective and comfortable means to use. The modern market offers many products that are aimed at solving similar problems. They are mostly made in the form of aerosols and very convenient to use, for example, do not flow down a vertical surface. Over time, the glue on the adhesive tape dissolves, and it easily peels off the surface. The same facility can completely clean the window, eliminating the remnants of glue from the surface. Plus, by purchasing it, adhesive tape and any other stickers can be eliminated not only from plastic, but also from any other surfaces. And to all other manufacturers promise that the composition does not damage the material itself, although they are prudently asked to check the reaction on an inconspicuous area before use.

Method No. 7

How to wash plastic windows from scotch tape? You can use vegetable oil, which one, does not matter, it will suit both sunflower, olive or corn. Or different aroma oils. In this case, apart from a good result, a pleasant smell in the room will also be felt. Using a sponge or a soft cloth, the substance is applied to the plastic, then it must remain on it for 10 minutes, after which it can be wiped with a tissue or, after making a soap solution, wash the frame. And finally wipe with a damp cloth. This is a very gentle method, which certainly will not leave any damage, as well as an unpleasant smell.

Method No. 8

One of the interesting ways is to remove the adhesive tape with toothpaste. To do this, you need to wipe the surface thoroughly, remove the scotch. Spread the contaminated surface with toothpaste, hold it a bit, then wipe it dry with a rag. Then wipe the entire mixture with a soap solution. The bonus when using this method is that with its help you can get rid of not only scotch and its tracks, but also from scratches. Therefore, there is an answer to two questions: how to clear plastic windows from scotch and how to get rid of scratches on plastic

Method number 9

Help can be purified gasoline or white spirit, but with these substances should be treated with extreme caution, for testing should be applied to the surface of the product. Then leave for about five minutes, if nothing changes, then you can handle the surface. To do this, a soft cloth or cotton wool should be moistened in the substance and wipe the surface. After that, walk on top with a dry cloth.

Method No. 10

Sometimes it can happen that some windows are taped with tape for a long time, and nothing helps to get rid of it in such a difficult case. It is necessary to peel it in small pieces, and in the end it takes too much time, and the surface remains very unpleasant and sticky to the touch. Than to wash plastic windows of an adhesive tape? There is a way that works great in such cases. In order to get rid of scotch, you need a double-sided sponge for utensils, spatula, gloves, laundry soap.

We take a sponge, which must be soaked in water, then squeeze it well, so that water does not drain from it, then apply soap to the hard part. Well soap the surface, then wait a bit and, carefully poddevaya spatula, remove the adhesive tape, the spatula should be sharpened, so it was more convenient to peel off. Next comes the question of how to clean the scotch tape on plastic windows. Simply by the same hard side of the sponge, applying the effort, walk through the remnants of the glue, carefully wiping everything off. After wet the loofah in clean water and rinse off the leftover glue. In order to tear off the remnants of scotch, you will have to try. But in this way, you can gradually clear the entire window. Although it should be noted that the occupation is very time-consuming.

Removal of double-sided scotch tape

And if the solution of the problem, rather than washing the scotch from the plastic window, sometimes does not take much time, then with a two-way all is much more complicated. Since it is stronger than the usual clerical, so first you need to warm it up with a hair dryer or steamer, then gently remove from the surface. With the remaining glue, an ordinary soap solution can cope, or any detergents can be used. If they can not eliminate the traces, then you can try using acetone. Apply it to a cloth and wipe it well, then rinse with clean water. Also, if all of the above methods do not work, then you can try to remove the scotch with cleaned gasoline, the one that is intended for refueling lighters is good. But what should not be forgotten, so it's about the need to check this or that remedy in a place where damage will not be visible.

Substances that are forbidden to use

• Powders with a coarse crystal structure, as they can damage the material and leave scratches on it.
• Acids - to use these tools is very dangerous. They can spoil the appearance, yet afterwards the plastic sometimes changes color from white to yellow.

Therefore, considering, than to wash plastic windows from an adhesive tape, it will be more expedient to refuse the aforementioned means.