HomelinessDo it yourself

Shelf of wood with her own hands (photo)

If you need a shelf made of wood, you can make it yourself easily and quickly with your own hands. How to do it, we will tell in our review.

Preparatory stage

In order to work on the task of making a wooden shelf, it will be necessary to prepare a battery screwdriver. Select the tool with a self-clamping chuck whose gauge is 10 mm or more. In addition, you will also need an electric jigsaw. In order to get even edges, you need to buy saws for woodwork. Buy is worth and a chair that can have a price within 30 dollars. Useful and punch, as well as a set of drills to work on wood. In order for the shelf to turn out to be aesthetically pleasing and even, the tape measure is useful, as well as a marker. The process will not be possible without a spatula and brushes. You can do not just hinged shelves, but a prefabricated structure that assumes a hidden attachment.

Blanks

Shelves for flowers made of wood by their own hands can be made using a wooden bar, the cross section of which is 40x40 mm. The final length will be determined by the number and parameters of the shelves. Prepare a plywood with a thickness of 5 mm. As the most acceptable option is eurofanera, as it is devoid of all kinds of ground defects. Stock up and the usual clypeus, which should have a width of 50 mm, and be made of wood. In the final result, the shelves will have to be coated with paint, and if the products before it are defective, you can get rid of them by applying putty. Fittings are almost unnecessary.

Defining parameters

Shelf made of wood, made by her own hands, can have any dimensions, but in this example, dimensions equal to 800x300 mm will be considered. The thickness of the material will be 50 mm. Initially, it is necessary to prepare the elements for the described shelf. For this, a bar in the amount of two pieces (720 mm) is useful; Another pair of bars (300 mm), as well as plywood in the same amount (800x300 mm).

Platbands are recommended to be cut on the stool, and their thickness in the described sizes is not taken into account, as it may be different.

Build process

If you make a wooden shelf with your own hands, then do not assume that it will be just a board, reinforced to the wall by means of corners, as the construction, as already mentioned above, will be the team. Applying a pair of short and one long bar, the last of which will be the front, it is necessary to assemble the frame. For this, it is permissible to twist it using self-tapping screws. You can take black, 4x80. The main condition is the need to try to make even pairing.

As soon as the shelf from a tree with its own hands is turned into a frame of a U-shaped type, it is possible to strengthen the plywood on both sides with it, using staples. If there is a desire to make the construction as strong as possible, the previously fastened surfaces must be smeared with PVA glue. If the adhesive composition is not used, then in addition you will have to use self-tapping screws.

Now the case comes into play. It will allow you to cut the clypeus, in the end you should get an angle of 45 0. This will allow you to decorate the non-aesthetic ends. It also has to be smeared with glue and further strengthened by means of staples. Instead of such a mechanical fastener, carnations-"invisible" can be used, this eliminates the need for long patching of the surface.

Surface treatment of the shelf

After the regiment with its own hands made of wood was made, you can proceed to work on its ennobling. To do this, all irregularities are covered with putty, and after drying, they are treated with fine sandpaper. If it is supposed to use glossy paint in painting work, then it is necessary to cover with grounding composition and grind with special care until an ideal surface can be obtained. Such manipulation is recommended to be carried out 2 times. It is necessary to do this before the installation of the shelf on the wall surface, since after such work it will be very difficult to carry out.

Mounting the shelf on the wall

After the shelf itself was made of wood and painted, it should be left until the composition dries completely, only then it will be possible to proceed with the subsequent work. The shelf, made according to the above recommendations, is a kind of hollow box that is open only on one side. The remaining bar, which is similar to the one in front, will be the completion of the construction, as well as the fasteners. Its fixation to the surface of the wall must necessarily be made through a building level or other similar tool, since you will have to ensure an ideal leveling. When working with a puncher in any case, you should not allow accidental damage to the electrical wiring, be sure to remember that the wall can accommodate pipes of the water supply system, so you need to work very carefully.

Fireplace shelf made of wood can be made according to the same principle. In order to mount to the wall, it is necessary to fix the rear bar to the surface. It should fit perfectly into the empty space of the shelf. In order to ensure this, it is necessary to reduce it somewhat. This will make the installation process much easier. At the next stage the regiment is put on the bar and strengthened through the plywood located above. Do this with self-tapping screws. The location of the fasteners in this place will not be noticeable, as something will stand on the shelf.

If such a shelf for books with their own hands made of wood will be made, then it will be possible to put on it different items, the total weight of which is 10 kg, but no more. Dimensions can be chosen independently, which will be affected by the needs of the owners.

Production of shelves for shoes

To produce shelves for shoes with dimensions of 900x350x524 mm, it is necessary to use chipboard. The whole construction will consist of a cover, the dimensions of which are equal to 900x350x16 mm; Walls in an amount of a pair of pieces 508x350x16 mm; Stiffeners 868x508x16 mm; Socle 868x80x16 mm; Under the shelf located 868x334x16 mm; The bottom of boxes 868x313x16 mm; Shelves in the middle 868x279x16 mm; Separator boxes 313x80x16 mm and the walls of boxes, which will be attached to the front, its dimensions are 868x96x16 mm. The assembly will be carried out at confirmations.

Once the cutting has been completed, you can proceed to drilling holes for confirmations, dowels and shelf holders. Now it's time to paste the edge. And in the end you can start and build.

Initially, the side walls and the stiffener are fixed. The next step will be the addition of a socle and a bottom - a reinforced shelf. Now you can install the boxes in the shelf system. Next is the top cover, which is installed to the rear wall.

The final stage

When a shoe shelf is made with its own hands made of wood, photo of the manufacturing process is presented in the article (see above), the top cover should be fixed by means of door hinges. Holder holders can be installed and put the middle shelf. Holes for shelf holders can be located at different levels, this will allow you to make distances for different shoes, for example, for shoes and sneakers. On this we can assume that the self-made shelf for shoes is ready. But that's not all, its surface needs to be refined, for which you can apply the same processing method that was described in the case of the bookshelves above. Shelves for shoes with their own hands made of wood with dimensions suitable for its functions, is made relatively easily. This technique you can use in the process of work. And if you want it to be even more comfortable to use, then its top cover can be covered with foam rubber, and then cover with a dense cloth.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.delachieve.com. Theme powered by WordPress.