Setting the alarm "Starline". Instruction manual for car alarm Starline

Car owners are trying to protect their vehicle from burglary or theft. To this end, various alarm systems are being used. One of the best options for security equipment today is Starline. In the development of this car alarm, the creators used the latest developments in the field of signal transmission. The special encoding practically completely excludes the possibility of intellectual hacking. The dialogue message of the system with the control panel (key fob) allows the driver to fully use the functions laid down by the manufacturer in the device.

How the "Starline" alarm is configured is described in detail in the instructions. The driver should familiarize with its basic functions. Only after carefully studying the use manual, the owner of the car will be able to fully operate high-tech equipment.

general characteristics

Car alarm "Starline A91" is a system of dialogue messages. Radio control is performed using a unique encoding, which excludes the possibility of hacking. The system has more than 60 functions. Significantly increase the comfort of the possibility of autostarting and warming up the engine of the machine.

The range of the communication signal reaches 2 km in an open area. If there are obstacles in the way of the signal, this indicator is reduced to 600 m. At the same time, the interference level is significantly reduced due to the use of a transceiver with 128 channels of radio transmission.

The instructions for operating the Starline alarm system must be carefully studied by the owner of the vehicle. This gives a guarantee that the system will function properly, and management will become comfortable.

"Starline A9" is used at temperatures from -45 to +85 ºС. This is a quality, hardy car alarm, which is relatively inexpensive.

Technical requirements

Signaling "Starline A91" can be installed in cars with a diesel, turbocharged or gasoline engine. It is compatible with both automatic and manual transmissions. The equipment requires a battery with a voltage of 12 V.

The central alarm unit is recommended to be installed under the dashboard. In this case, the length of the connecting wires will be minimal. The unit should be well fixed on a flat surface. The wires must approach it so that no drops of water can enter the device (they may drain along the conductors).

The transceiver with the antenna should be installed at a distance of at least 5 cm from the metal parts of the body. Most often they are mounted on the windshield or under the dashboard. That the system worked correctly, it was reliable, it is better to entrust its installation to professionals.

Trinket

Signaling "Starline", the factory settings of which can be changed in accordance with their own needs, is managed using key fobs. The kit includes 2 consoles. The first keychain has an LCD display, and the second - only the buttons. The interface has been translated into Russian for convenience of the domestic user. This makes it easier to manage, makes the dialog message intuitive.

Up to 4 keyfobs can be entered in the system memory. The package also includes a cover for the control panel.

The key ring allows you to control all alarm functions, program them. The most popular commands are the setting and removal of the guard mode, the autostart of the engine or its activation by the timer.

Signaling "Starline A91", which is set up by the user, has a lot of programs that are necessary for the comfort of use.

Setting the key fob

All the key fobs for one setting are registered in the alarm memory. There is a special procedure for this. The auto mode must be off. You need to find the Valet button. We press it 7 times.

Then turn on the ignition. There will be 7 beeps. This means that the system has entered the keyfob binding mode to the control unit. Most often this is necessary if the control panels for some reason do not communicate with the central control device or the driver bought a used car. In this case, the "Starline" alarm is programmed again. Resetting the settings is automatic. The user can do it remotely if desired.

On the key fob there are buttons II and III. They are simultaneously clamped. A signal will sound that indicates the activation of the key fob. With the other consoles, they perform the same manipulations.

Time setting

After the key fobs are attached to the control unit, you can start using them. First of all you need to adjust the time. This procedure is carried out exclusively with the help of a key fob. For this, there is a certain algorithm prescribed in the instruction.

Signaling "Starline", the timing and other functions of which are clearly explained by the manufacturer, is considered one of the easiest in the field of programming. To set the time, press button III. The clock icon on the display flashes. To decrease the reading, press the I button, and to increase the II button. Then adjust the minutes. To do this, press button III again. Setting the time will allow later to set the timer, autorun and other functions.

Engine start programs

The "Starline" alarm setup instruction allows you to set the required functions when starting the engine. With the help of a remote control, you can remotely turn on the car's motor, and also prolong its operation. It is very convenient. In the morning, you can have a cup of coffee at home while the machine warms up.

In addition, the engine can be turned on by a timer or an alarm clock. The driver has the option to set autorun options themselves. The engine will turn on once a day or after a certain amount of time (2, 3, 4 hours).

The motor monitoring function is provided. For this purpose, the system tests the signals of the generator, the tug sensor, and also the voltage changes in the electrical system of the car. The keyfob displays information about the duration of the engine. When the autorun features are enabled, the driver must comply with all security requirements.

Security

The instruction manual for the "Starline" signal system designates a number of requirements. The driver must perform them to the fullest. This will ensure complete safety of the car, as well as to avoid accidents, troubles.

Park the car on an open, well-seen site. Do not forget to turn on the handbrake. The automatic transmission lever should be set to the PARK position, and the mechanics to neutral mode.

You can not start the engine automatically if there are people in front or behind the car. It is unacceptable to leave the key chain in an easily accessible place where it can be reached by children or unprepared persons. All systems of the car must be in good condition, have enough fuel and consumables.

Service functions

Setting the alarm "Starline" allows you to apply a variety of service functions. The user selects the most suitable programs for himself. The most popular are the following modes.

If the driver installs a silent protection function, when an attack on his vehicle the siren does not work, but the key fob will receive the relevant information. This will allow the attacker to red handed. You can also set the silent output and enter the armed mode.

You can program a function when the system automatically returns to the previous mode when accidentally shut down. It is also possible to control lighting, ventilation and heating. Their automatic work is adjusted.

Buttons of the key fob can be put on the lock to avoid their accidental pressing. One of the necessary functions is the location of the car. Remotely also it is possible to erase from memory of the signaling the lost charms. There are many programs that increase comfort and safety.

Malfunctions

The "Starline" alarm setting, performed properly, allows the system to perform its functions fully. However, there are several types of faults that can occur during the operation of the alarm.

Most often, drivers note its false triggering. In this case, you need to properly configure the sensitivity sensor of the control unit. It may be installed in the maximum position or the sensor is not mounted correctly.

It also happens that the control unit does not respond to the keyfob signals. They need to be tied to the system again. Perhaps in the key fob there is a battery. Sometimes you need to purchase a new remote.

Much less happens that the alarm does not close the door locks. In this case, the fault can only be remedied by a specialist.

After considering how the "Starline" alarm is configured, the driver will be able to fully use all its functions. Fulfilling the requirements of the instruction, the owner of the car will ensure the reliability and stability of the system.