Automobiles, Cars
Self-Signaling Connection - Basic Rules for Installation
Buying a car, a car enthusiast is faced with the problem of how to protect his iron horse from hijacking. To help developers and manufacturers of anti-theft tools offer a huge number of their developments. But their diversity will
But if you by virtue of some circumstances (consider yourself sufficiently experienced for this purpose, the desire to save, the lack of a specialist or consider that the connection of the alarm system - it's not so difficult) decided to install an anti-theft system with your own hands, then you should adhere to the following rules:
- One of the main conditions is the place where the anti-theft system is located.
There are time-tested options, but they have long been known to hijackers, so try to install it in unexpected places. For example, there are cars with internal plastic wing covers, under which hiding a siren. Place under the battery mounting plate is also a good option. Do not place or make an alarm connection near the stove, air conditioner, receiver and moving parts of the vehicle. - Protect the alarm unit from blows, wrap it with a password. Create problems for the potential hijacker, using a large number of cable holders and tapes when attaching the anti-theft device, it will lose a lot of time to remove them.
- When connecting the alarm, carefully read the instructions and follow the instructions. Due to various design features of different brands of cars and anti-theft devices, the installation stages can be very different.
- After installing the car alarm, install the control module, remembering that it should be as small as possible for the hijacker, and therefore, choosing a place to accommodate it, take it seriously.
- Also, be attentive to the location of the switches, both auxiliary and system, placing them in the most unexpected place, which can puzzle the hijacker.
- Another vulnerable point of signaling is the different parts of the wiring, especially the ignition and starter wiring. Therefore, do not connect to these wires close to the ignition. Try to disguise the junctions by attaching them to the cable harness, which again will help you gain time while trying to steal your car.
- When choosing the locations for installing the components of the anti-theft device, remember that they are sensitive to moisture and mechanical shock, so take all measures to protect your car alarm from their impact.
Installing anti-theft systems is a complex process, but feasible with the right approach to this work. Thoroughly thought out the place of installation and disguise the details of this device, you can protect your car from theft.
Similar articles
Trending Now