Self-made wobblers: the process of making at home

When fishing, you should pay special attention to the gear. The success of the entire enterprise depends directly on them. Sometimes it is expensive to buy shop lures. If there is a desire and extra time, you can create self-made wobblers. They are made of different materials. The very process of making baits is very exciting. Having learned how to make wobblers, you can experiment with their form.

Each technology has its secrets. Before you start, you should study all the details of the process of creating self-made wobblers. They will not be worse than the purchased ones. After the creation of several fisherman's spoon-baits, it may be possible to perform the product even more efficiently than the copies of known manufacturers that are on sale.

Body materials for bait

Asking the question, how to make a wobbler yourself, first of all pay attention to the material of the hull. Most often, a tree is used for this purpose. However, it is better not to take coniferous rocks to create a wobblers. Do not fit also heavy in the processing of oak, birch or beech. The best thing for such a bait is a linden.

Some fishermen began to create wobblers from old balsa floats. Foam plastic, plexiglas or plastic are also suitable for these purposes. Even the usual economic sponge will come in handy for self-made bait. Wobblers for trolling on pike perch, pike or other predatory fish, many anglers do precisely from this material.

It is better not to use polystyrene for pike fishing. Otherwise, the wobbler will quickly deteriorate under the teeth of the river predator. Also it should be noted that special tools will be needed to handle Plexiglas and plastic.

Blade material

A feature of the wobbler is his ability to dive to a certain depth. The bait creates noise, which is noticed by predatory fish. Therefore, the blade should be given special attention.

It can be transparent. For such a blade, you need a sheet of polycarbonate, plastic or plexiglass. If the transparent blade is unimportant for the new bait, different sheet metals are used. Self-made wobblers can have a blade made of brass, aluminum, copper or titanium. The thickness of the sheet for this element should be 1.5-3 mm.

paints and varnishes

When we are going to create homemade fishing tackles, we need to think over the materials to cover the body of the product. This is especially important for wooden wobblers. To ensure that their body is not destroyed by water, the varnish will have to be applied without fail.

To make a wobbler with your own hands, you need to prepare an epoxy resin. Covering the body of the bait is performed with the help of nitro-lacquer. Wishing to create multi-colored wobblers, apply paints on its basis. Pentagonal varnishes are considered to be more durable (PF-283). They look better. There are paints based on such varnish.

If you want to primer the case, you should use aluminum crumb. Sometimes it is mixed with bronze. Dry materials are kneaded in a suitable varnish.

Instruments

When studying the question of how to make a wobbler, you should pay attention to a selection of tools. They are sure to be in the arsenal of the home master. First of all, you need to prepare a knife. If his blade is blunted, you should sharpen it well. Otherwise, it will be difficult to work with any material. The knife should not be large. It's easier to give the wobbler the shape of a short but strong blade.

Next, you need to prepare a hacksaw for metal, files and files. Their profile should be different. To make it convenient to pinch the wire, use pliers or round pliers. To grind roughness of the workpiece, sandpaper is required . It is selected in accordance with the type of material of the shell. For convenience, the workpiece must be held in a vice. These are the main tools. For coloring, brushes of different sizes will be needed.

Beginning of work

Experienced fishermen are advised to start their own production of baits from the selection of a suitable shape. And it's better to copy products of famous brands. Preference should be given to the simplest specimens.

The body of the bait can be elongated (minnow) or short and puffy (fat). In the first case, you can make a wobbler from a toothbrush, and in the second - from a bar of wood. It will be more correct to produce a small batch (up to 5 pieces) of the same baits. This will save time and materials.

The whole process is divided into 4 stages: the manufacture of all elements, run-in, assembly and painting. Each of them has its own characteristics. Experienced fishermen tell about them.

Parts manufacturing and assembly

Making homemade wobblers at home begins with sample measurements. Next, select the appropriate bar material. Applying the shape of the wobblers, the size is increased by 1 mm for the possibility of processing the mold.

With a knife, cut out the desired shape. The workpiece is clamped in a vice. On the belly of the bait the nail is made. It is carried out by checking the sample. Next, the shape is processed so that the notch is centered. The symmetry here is very important.

With the help of emery, the workpiece is made very smooth. In its nose, the nail is made at an angle, as in the specimen. Then a blade is cut from the plexiglass or other suitable material. With the help of the file, the handle is given the correct shape. The blade must stand in the nail file tightly and symmetrically. At the appropriate places, wire is attached.

Load

Self-made wobblers must be properly weighted. To do this, use a piece of lead of the required thickness. A load is inserted into the transverse nag. This will give buoyancy to the product.

If the load is located on 4/5 of the body, the wobbler will be standard. It will easily be able to swim on the surface and shallowly dive when driving. You can also make a sinking lure or even a suspender.

If necessary, the weight of the finished wobblack is corrected by tees or winding rings. At the same time, the finished product must be oriented horizontally in the water.

Running in

Creating wobblers for trolling on pike perch, pike or perch after the pattern of the bait of a well-known manufacturer, it is possible to achieve an identical game of tackle. Such a result can be achieved if each element was executed strictly in accordance with the form of the original.

If minor errors were made, it is possible to correct the product a little when running it in. The shape and the inclination of the steering wheel influence the game of the wobblers in the water. If the blade is wide, the bait plays with a large amplitude, but at a lower frequency. With a large inclination of the blade, the wobbler more hesitates, but it is not deep in the water.

Also, adjust the position of the upper hinge. It has less effect on the game of tackle, but this element should not be left without attention. The vibrations of the bait should be stable. If at high speed the wobbler throws to the side, it is necessary to bend the loop in front in the opposite direction.

But the steering wheel must pass along the axis of symmetry. After running in, all the parts are disassembled, dried and prepared for final assembly.

The final stage

At the final stage, using the epoxy resin, glue all the parts together. It is better to add sawdust (this will prevent the mixture from escaping). When assembling it is necessary to pay attention to symmetry.

All the cracks, pores and irregularities are covered with resin. Hinges and other structural elements are cleaned with a file. Then the product is primed with a varnish with aluminum crumb.

After complete drying, apply a paint compatible with the varnish. The eyes of the wobbler are drawn. They should be white or yellow with a black pupil. The very body of the bait can be any color. Fish in water do not distinguish color. Therefore, the choice of shade depends only on the preferences of the master.

Some fishermen are interested in how to get rid of the odor of a lacquer of a self-made wobblers. Firstly, it should be noted that it is impossible to take cheap, low-quality varnish for such work. It is better to give preference to varieties on a water basis. They are completely safe for human health, and also are distinguished by their durability.

Secondly, if the low-quality lacquer has been applied to the product, you can correct the situation. After drying from above, another coat should be applied. But this must be done with NC lacquer. It dries quickly and eliminates the unpleasant odor of the previous layer.

The better the last layer dries, the stronger and durable will be the wobblers. Finally, a tee is attached to it. The bait for the predatory fish is ready!

Anyone can create self-made wobblers if they wish. This is a fascinating process. Make a quality wobblack will be after a few samples. It will bring a big catch and a sea of positive emotions.