Self-made crusher for cedar cones

Since ancient times, pine nut is famous for its curative properties. The process of preparing it is quite complex, the main stage of which is cleaning from the shell. Earlier it was necessary to do everything manually or to use the simplest wooden devices, but today they are replaced by mechanical equipment, without which industrial production is impossible. It should be noted that it is not without flaws, among which the damage of grains by steel parts, because of which the quality of the product decreases.

Varieties

There are special devices in which the grains are soaked and heated to a certain temperature, due to which they burst, but lose most of the useful properties. The gauge-crushing mechanism is the most common, a similar principle of action is the cedar cone crusher, used for manual peeling of the nut. The design of the apparatus includes a number of sieves in which the grains of different calibers are sorted, after which they end up in the crushing chamber. The resulting nuts contain a minimum amount of shell, which is screened by hand. Also worth noting is wasteless processing. After all, useful properties are not only the nuclei themselves, but also shells with cones, they contain a large number of vitamins and trace elements.

Self-made crusher for cedar cones

The walnut harvest can be made at the harvesting site with the help of peeling equipment and a shell collecting compartment. Despite today's variety of devices, do not neglect the possibility of independent production, as this will not only save money, but also make the device with the optimal size and characteristics.

The crusher for cedar cones is optimally suited for processing large volumes of walnut, its principle of operation is similar to a core mill. The basis of the design is a drum with a lot of metal pins facing in different directions. It is placed on a special shaft, the rotation of which is done by means of an engine or manually. The collected cones are placed in the hopper, during the rotation of the drum they are clamped with steel pins and crushed. After this, the grains, mixed with the shell, are sent for further processing.

How to make a crusher for cedar cones

Manufacturing of the machine does not cause special difficulties and does not require large expenditures. The basis of the construction is a bunker, the walls of which can be made from pieces of steel sheet. The design is connected with M6 screws and special angles. It should be noted that the assembly is made after the installation of the drum, for the semi-axes of which previously cut grooves in the walls with a radius of about 25 mm. Near the grooves you need to weld the bolts, which fix the elements of the bearing units with the help of nuts.

For the drum, a piece of metal pipe is used, on which the scribe pins are screwed. The latter are steel bars with a diameter of 5 mm.

What you need to know

The manufacture of bearing housings should be entrusted to the professional, as they are milled as solid figures with a complex shape. Controlled crusher for cedar cones manually, using a handle, fixed on the right half of the axis of the drum. The components of the handle can be made from pieces of pipes of suitable size. Next, you need to use a welding machine for a reliable connection of the axis, arm of the handle and bushing.

It should be noted that the crusher for cedar cones Can be manufactured not only from steel, but also from aluminum alloys, due to which the overall weight of the device is significantly reduced.