Router Zyxel Keenetic Omni: setting. Zyxel Keenetic Omni: modem setup

The ideal solution for organizing a small home local area network is Zyxel Keenetic Omni. Setting it up, recommending its use, as well as expert opinion and user feedback, is what will be discussed in detail in this material.

Specifications

Enough impressive set of communications from this router. One input port for connecting a twisted pair from an Internet provider. The maximum speed of receiving information on it is 100 Mbit / s. Setting up the Zyxel Keenetic Omni router allows you to use not only this port, but also YSB, to connect to the global web, but in this case you will also need a 3G or 4G modem. Also, an external drive or printer can be connected to the local area network to this interface. Like most devices of this class, this router is equipped with 4 wires to create a wired part of the local area network. Another important feature of this router is the ability to install 2 antennas for the wireless segment of the local area network. Such a constructive solution increases the transmission speed of information up to 300 Mb / s, the radius of coverage also becomes larger. And the signal gain of this router is 3 dB.

Completion of the network device

The package is standard enough for Zyxel Keenetic Omni. Customize It is described in detail in the instruction manual. Also there is a warranty card and a small promotional booklet in the list of complete documentation . In addition to the router itself, there is also a power supply unit with the necessary cord and a power connector and a twisted pair of twisted pairs, which is designed to configure the network device. There are two more antennas for installing them on the router.

Router design and ergonomics

Like all Keenetic routers, this router has the following control and switching elements:

• The power button (located on the back of the device and located near the right of its antenna).

• Button for quick connection of a new network device (located near the left antenna).

• Reset button of the router (located next to the quick connect button).

• On the edges of the router there are two nests for installing antennas.

• At the center of the back side are 5 RJ-45 jacks for connecting the input wire from the provider and 4 ports of blue for connecting using a twisted pair of devices to the router.

• On the left side is the only port of the USB.

• The front panel displays the entire display - 7 LEDs. The first of these is the supply of voltage to the router. The following 5 characterize the operation of all RJ-45 ports. Then the wireless segment of the local area network is displayed. The penultimate LED is the presence of a connection to the global computer network, and the latter characterizes the work of the YUSB port.

In the rest it is a usual box of black color with 2 antennas.

We learn the initial parameters

Next, you need to find out the values that need to be entered into the router so that the local computer network starts functioning normally. This information is usually indicated in the contract. Knowing it, it is not difficult to configure Zyxel Keenetic Omni. Setting up the MTS requires setting the following parameters:

• Connection type is PPPoE.

• Login and password - set by the operator and specified in the contract.

Other values, such as a network address or MAC address, are set automatically by the provider in this case. So it's enough to set the corresponding checkbox and with minimal user participation in this case the Zyxel Keenetic Omni router will be configured. The Beeline setting, in turn, requires setting the following parameters:

• The connection type is exactly the same as in the previous case - PPPoE.

• The login and the password in this case, as well as at MTS, are set by the provider.

You do not need any additional parameters to configure the connection, and after saving the changes you made, it will immediately allow you to connect to the global Zyxel Keenetic Omni web. Setting up "Rostelecom" requires setting the exact same configuration as for "Beeline." Finally, it should be noted that the above adjustment algorithms are suitable for configuring this router model with the default provider settings. If an additional service is activated, for example, a static address, the order of the router's configuration will change. It is necessary to disable the automatic receipt of the address and set its static value.

Initial connection

The next step is to connect to the PC Zyxel Keenetic Omni. Setting it while doing this can be done without exchanging information with the Internet. We have a router next to a computer or laptop. The power supply unit is installed in the socket, and the cord from it is connected to the socket on the router. Complete the twisted pair with one end connect to the first RJ-45 connector yellow, and the second - to a similar port of the network adapter. After that, we check the collected computer network and turn on the router and the computer. Then you need to wait until the download is complete.

Quick setup

Then we launch any of the Internet promorchshchikov, which is available on the PC. In its address bar, type "192.168.1.1" and press "ENTER". In response you will need to type "admin" in the "Login" field, and the default password is 1234. In the window that appears, click the "Quick Setup" button. Next, set the MAC address. Then we select the method for obtaining the network address. The next step is to set the login and password for connecting to the global web. After performing this manipulation, click on the button with the word "WEB-Configurator". Again, enter the default password 1234 and click "Apply". In the opened window in the section "Internet" we enter the parameters of the provider: we set the protocol type, specify the login and password.

In turn, in the "Wi-Fi" section, configure the wireless network. Here we must specify its name, password for access to it. Also choose the WPA2 encryption method. This fully configures the Zyxel Keenetic Omni wireless inserts. The modem connected to the UTS is configured in the same section as "USB". In this case, 4G-devices will be automatically configured. But for 3G, you need to check the box "Enable modem" and "Use modem for Internet access" on the 3G / 4G tab. At the end, you need to save all the changes you made to the network device.

We select the location of the router and perform its final connection to the global web

Next, you need to choose the right location for Zyxel Keenetic Omni. Setting up WiFi From the position of the router is already completed, and you just need to choose the right place to install it. The router should be as close to the center of your apartment as possible. This will significantly improve the quality of the received and transmitted signal. Prior to it, the cable from the provider should reach without problems. Also in the relative vicinity of this place should be an outlet. In the extreme case, you can use an extension cord. It is based on these recommendations and choose the location of our router. After its installation, we connect the input wire from the provider of Internet services. Then the power supply. The next step is the wired part of our home network. Before switching on, do not forget to check all previously performed switching and only then apply voltage.

Configuring a Wireless LAN Segment

With a wired part of the system, with proper connection problems do not arise. It works after the download is finished (that is, when the POWER LED stops flashing and starts to glow) Zyxel Keenetic Omni. Setting up WiFi, In turn, requires a certain test. To do this, any device equipped with such a wireless transmitter must be connected to the home network. In case the device functions under the control of "Android", use the upper status menu and turn on this corresponding transmitter. Next, in the list of available connections, select the name of our network. Then, in the appeared query, enter the password. Similarly, devices that are running Windows are connected. Only in this case is the "Network Connection Management Center" used. Its label is located in the lower right corner of the screen. We open it with a mouse click and select the name of our network in the list. In response, you must enter a password.

What about IPTV?

And you can also connect a set-top box to Zyxel Keenetic Omni. IPTV setup is quite simple. In the router itself, you do not need to make any changes to the parameters. The prefix to the local computer network is connected by means of twisted pair. In the rest, you need to set the necessary network connection values inside the console itself.

Functional Testing

Setting up the Zyxel Keenetic Omni router is almost over. The only thing to check is the network's availability. For this, on any of the devices we connect via Wi-Fi to the router. In case your device functions under the control of such OS as "Android", we use the top quick setup menu. In it, you need to find a button with the Wi-Fi logo. After the search is over, select the network name that was previously set. The next step is to enter the password for access to connect to the global web. Further, we wait until the connection is established - the color of the Wi-Fi indicator at the top of the screen should change.

The procedure for connecting to a gadget under the management of "Windows", in principle, is similar. The only difference is that in this case, the "Network Management Center" is used. Its icon is displayed in the lower right corner of the display. Then in the opened list we find the name of our local network. Well, at the end, enter the password to establish the connection. Again, we are waiting for the connection to be established. In the next step, start any browser, enter any query in its address bar and press "ENTER". If after that the start window of the specified site appeared, everything is in order, you can continue to work. But when the initial page did not appear, it is necessary to repeat everything again and eliminate the cause of the malfunction.

Summary

As you can see from all the above, it's not so difficult to properly configure Zyxel Keenetic Omni. The setting up of this network device is possible even for a novice user, who has minimal experience with such equipment. But the capabilities of this router are really impressive: with its help you can easily and easily create any home grid. In this case, you can connect it to an external drive or network printer.