Router D-link DAP 1360: overview, setup, manual, features and reviews

The D-Link DAP 1360 device, which is tuned without much effort, is delivered to the market in two different versions. This device is able to function as a normal router, and as a router. It will be an excellent solution for those who wish to purchase a beautiful device for the home to create a wireless access point.

Instrument settings are generally understandable, there is a slight difference in the options of the two types of this router. In the article we will consider what each revision represents, what functions they are equipped with and how the firmware is implemented.

general information

The DAP 1360 router is an open source access point. Typically, it is used to work in small offices and homes.

The device is universal. It has 7 different options that allow you to create and extend a wireless network. When choosing the necessary implementation, you need to understand in which mode the router will work. It can be a repeater, a wireless client, an access point, a WDS bridge, and an AP. The device besides the listed can work with two modes WISP. Has antennas, which are the receivers of the signal from the provider.

The router works on Linux. The bundle includes a disk with a special software, which will allow you to quickly understand the functionality of the DAP 1360. Configuring the router using the software will be almost instant and easy. Internal memory - 16 MB.

Feature Overview

The equipment operates with three standards - b / g / n. Thanks to this, the speed of the received Internet will be high and of high quality, as far as the provider allows. Modern encryption protocols are used, which perform filtering on MAC addresses.

The highest data transfer rate is 150 Mbps. Due to the presence of antennas, the coverage area is quite extensive. As consumers note, speed is more than enough for normal home use.

Access point, repeater, bridge - these functions are inherent in the B1 revision of the DAP 1360 router. Its configuration is fairly simple, all the nuances are described below. Another revision can be a router, so it is quite possible to call it a full-fledged router. The difference of the latest modification from modern devices of another manufacturer is that it has only one LAN port. Although the standard number is 4.

Setting revision B1

The setting of the DAP 1360 revision B1 is slightly different than the other modification. This is due to the fact that it does not work as a router. This device is most often used as a usual device for distributing a wireless signal and interacting with it.

In order for the equipment to work properly, you need to make some settings in the computer itself. First you need to connect the device to the PC via a network cable. Then in the "Control Panel" find the "Network" menu. The access point is selected there. The owner of the router is interested in the "Properties" section. In the "Protocols" you need to change the address, the subnet mask and the gateway. All data are standard and can be found in the device manual.

Configuring Network Settings

If you want the B1 modification to work in the wireless access point mode, the following operations should be performed.

In the browser, go to the router settings menu. To do this, you need to write the address of the device in the search box (it's standard and specified in the instruction). After the system has been successfully booted, a window will open asking you to enter your login and password. The first line should be written admin, and the second - leave blank. In the "Settings" menu, open the LAN section. There will be a window asking you to select a connection. You should pay attention to the category "Static". The address should be changed to 192.168.1.150. The gateway is standard, you should look at it in the instructions. DNS is better to put 8.8.8.8. This will allow using the "Google" protocols if there are problems with the servers of the service provider.

Work in access point mode

If you are interested in the operation of the DAP 1360 in the access point mode, you need to pay attention to the following recommendations for setting up the device.

You need to login to the browser. In the address bar, prescribe a special combination that allows you to go to the settings menu of the device. When the site is reloaded, a window will be displayed, in which you need to specify a login and password. They are the same - admin.

In order to perform an automatic basic configuration, you need to go to the connection menu (it is under the "Network"). Clicking will open the explorer. If there is a tick near the line of the wireless connection, then you do not need anything. Click "Next". A new window will open. In it, you need to remove the checkmark next to the line that is responsible for hiding the signal name. You can enter the network name. Next, you need to select the desired mode of operation, namely 802.11 b / g / n. Entering the "Security", you should pay attention to the types of encryption. The access point must be WPA-PSK. There you also need to come up with a password for the network.

Working in router mode

In order for the DAP 1360 to work as a router, you need to make certain settings.

You should enter the parameters and activate the necessary mode of operation of the device near the "System" menu. If this method does not work, you can simply go to the section and select among all available options "Router".

In the "Network" menu, you should pay attention to the WAN line. After the instructions are completed, the owner will see that the connection has been created. If the provider works with the dynamic address of the PC, then nothing else needs to be changed. Those who receive the signal on other protocols, you need to open the created connection and delete it. Then you should create your own connection. In the menu items you need to specify all the data that the provider will ask. As a rule, customer feedback indicates that there is no need to contact the center directly, since all information is indicated in the contract.

Firmware Upgrade

What should I do if the DAP 1360 starts to malfunction? Firmware is necessary for the operation of the router itself, without it it will not be able to perform the basic tasks. Therefore, when it fails, the device either stops responding, or there are always errors. In addition, the manufacturer recommends that you periodically update the firmware version. This will make your work on the Internet more secure. Consider the firmware update on the D-Link DAP 1360 router B1 revision.

On the manufacturer's website you need to find the required version of the software. It is necessary to pay attention not only to the fact that it is intended for this router, but also for revision. You must upload the file to a computer or laptop. You must select the "Maintenance" option in which the "Firmware" tab will be displayed. There you should click on the "Update" window. Next, you need to specify the path to the new version of the software file. After that, the router will do everything itself. As a result, it will reboot.

How do I upgrade my D1 1360 router to D1 revision? It should be as in the previous case to download the firmware from the official website of the manufacturer. Then you need to go to the settings and go to the "Advanced" menu. In the "System" will be the item "Update". There, the downloaded file is downloaded.