Why does the router not distribute the Internet over WiFi? Solution

It is difficult for a modern person to imagine life without access to the World Wide Web. Times when the family had only one computer, long over. Now people use tablets, smartphones, laptops, which are equipped with a WiFi module. Wired router without wireless network support has become irrelevant. He is not able to provide the Internet with all the available gadgets. How to be? Of course, replace it with a device that works in WiFi mode.

Previously, routers were quite expensive. Their setup required special knowledge. Now everything has changed dramatically. Manufacturers of routers have tried to make their devices not only available to each buyer, but also as simple as possible. This can be confirmed by buyers who purchased devices of such brands as TP-Link, Linksys, ZyXel, Asus, D-Link and others. In their range of products are presented both budget models and expensive ones.

However, even though the configuration of the routers is simplified as much as possible, sometimes users experience disruptions. For example, there is no WiFi signal. There are many reasons for such a malfunction. So let's understand together how to configure the TP-Link WiFi-router and other brands, as well as fix the problems with the wireless network yourself.

Wireless network: Symptoms

As soon as the user first experiences a failure in the router, it begins to look for causes in the device itself. However, in rare cases, it is out of order. As a rule, the problem lies in the settings. And it is important to pay attention that it is necessary to check them not only on the router, but also on a gadget that can not connect to the access point. Most users care about why the router does not distribute the Internet over WiFi.

What signs can indicate a malfunction?

• There is no signal.
• Long connection time.
• Low speed of the Internet, distributed by a router.
• Frequent network failures and reconnections to WiFi.

If such signs are found, you will need to check that the devices are properly connected and configured.

Search for the guilty

When you can not figure out why the router does not send the Internet over WiFi, but it connects to the network, it is necessary to find out what or who is to blame for this. For this, a number of specific actions are carried out:

• Provider cable. Its working capacity is checked in the following way: connect it directly to the computer and make all necessary settings. If there are no problems with the Internet, then the reason is worth searching in the router.
• Wireless network settings. Having checked the cable and the connection, it can be concluded that the device itself is functioning correctly. The problem may be in the configuration of the wireless network. There are such devices that are equipped with the function of enabling / disabling WiFi.
• Checking devices. There are cases when the fault lies directly in the device that connects to the network. In order to verify its functionality, it is enough to make a connection from another gadget.

Why does the router not distribute the Internet over WiFi? Causes

If, with an active connection, the user can not access the WAN, the reason for this is the errors made when configuring the router.

• Incorrect input / definition of IP address.
• The transmission channel is not configured correctly.
• An invalid DNS value.

The first two errors are made by users themselves when creating a wireless network. And this is the reason that the TP-Link WiFi-router does not distribute the Internet. The same problems are also relevant for routers of other brands. As for the last error, the value may be affected by several factors, for example, a virus on the device.

To eliminate this problem, it is not necessary to contact qualified programmers. All that the user needs is a cable that allows you to directly connect the Internet, PC or laptop and, of course, the router itself.

How to configure TP-Link WiFi-router?

The devices of this manufacturer are in high demand among domestic buyers. Therefore, it will be fair to begin with him. Enter the settings standard - enter the address in the browser string. After authorization, you need to find the WAN item in the Network tab. It will ask you to choose the connection type. You can learn it from the provider. The computer has current gateway values, subnet masks, provided that the Internet cable is directly connected to the device. In some models, automatic detection is available. After that, you can start setting up the WiFi network. To do this, you need to find the Wireless tab. In it, the user selects the Wireless Settings item. On the opened page you will need to enter the network name. Be sure to select the region for correct operation. In the line with the transmission channel, it is recommended to set Auto. After that, click Save.

Now you can start protecting the network. How can I change the password on the TP-Link WiFi router? All the tinctures are located in the Wireless Security item. Having entered into it, the user is offered to choose the type of encryption. Most programmers recommend using WPA / WPA2. By activating it, you can enter a custom key. After you must save and restart the router. If necessary, the key (password) for accessing the network changes in the same way.

Asus routers: setting up a wireless network

In addition to the two above-described models, Asus routers are popular in Russia. They are easily and quickly configured using a special program. Ideal for the novice user. In modern models, the firmware has an intuitive interface. All tabs are in Russian.

How to change the password on the Asus WiFi router if you do not remember it? Very easy. It is enough to connect the device directly to the PC via a cable. Then make a complete reset. The router will reboot and the user will be able to enter all the data.

Configuring the Network on the D-Link Router

Why does the router not distribute the Internet over WiFi? In order to answer this question, you need to go to the "Network" tab. In the WAN check the correctness of the selected connection type. It is important to note that there are some providers that work with binding to MAC addresses.

Most devices with new firmware have the function of automatic configuration of the wireless network. To do this, go to the "Quick Setup" item and activate the "Wireless Network Setup Wizard". At the end, save the results. There may also be a WiFi tab. It is enough to choose "Enable" in it.

Configuring a WiFi network on ZyXel routers

In the assortment of this brand it's easy to choose an excellent WiFi router for the apartment. According to many users, these devices are characterized by reliability and high signal quality. However, sometimes there may be problems with the wireless network. The reasons and solutions are already described above. But in order for the user to know exactly where to fix the error in the settings, you should step-by-step execute the instruction given below.

1. Enter the settings - 192.168.1.1.
2. In the opened interface, select the "Internet" tab and check the connection type.
3. Go to the "WiFi Network". There check the parameters of the standard network, channels.

It is important to pay attention to the selected signal power.