Repair and modernization. How to disassemble a laptop asus

Working with a personal computer, and even with a laptop, sooner or later there is a need to disassemble it. Why is it important? The fact is that someone needs to upgrade RAM, for example. Someone just clean it from the dust. In any case, the owner faces the task of how to disassemble the laptop asus, without damaging it inside and out. It is on this example that we will consider disassembling the laptop.

We fix the computer. Demolition asus

Details of the dismantling of the laptop Asus K50IJ. Its description will help to apply the knowledge gained if it is required to open the Asus K serial computers.

The following list of tools is suitable for this:

• A set of two screwdrivers: a thin (type "star") and a straight screwdriver.

Nothing more is needed. Now you need to disconnect the device from all batteries, including battery. To remove it, turn the asus upside down and unscrew the retaining clip with a screwdriver.

Now you need to remove the bottom cover. It is held by 4 screw clamps, and they must also be unscrewed consistently. After that, slide the cover slightly on the opposite edge of the battery. The result - you can see the motherboard of your laptop with all its subcomponents. As you can see, it is not very difficult to disassemble the laptop asus with your own hands.

You will now have full access to such devices as a hard disk drive, CD drive and memory slots. Also, you can replace the internal battery of the calendar, clock and CMOS memory settings .

We continue to disconnect components

So, we learned how to disassemble the laptop asus. What next? It remains to find out the details of the removal of individual components:

• To remove the CD-ROM drive, unscrew the screw that secures it, and slide it along the guide into the outer hole (push outward). Do not forget to do everything carefully;
• To remove the bar of RAM, press the thumbs of both hands with plastic latches. In this case , the memory module slightly rises upwards, and it can easily be removed from the corresponding connector. Do not forget that the contact parts of the module must not be touched by hands;
• To remove the main cooler, the cooling processor, remove the 3 clamps at its edges and carefully disconnect the pins;
• Knowledge of how to disassemble the laptop asus, allows you to remove the keyboard. To do this, you need to turn the device upside down. Look closely at the special latches near the monitor. Take a small sharp screwdriver and gently press them until the keyboard rises. Now it can be placed on the arm. It remains only to pull out the cable between the system board and the keyboard. To do this, slightly slide the two fastening bolts on the board. In this condition, it is not difficult to carefully disconnect the cable.

Remember also that the build order is usually the reverse of the disassembly sequence. Despite the fact that you learned how to disassemble the laptop asus with your own hands, do not apply these skills without extreme necessity. If you are not going to upgrade a laptop, clean it from dust or are not sure of your actions, it's best to leave it as it is and contact a specialist. If you have repeatedly faced similar problems, and the screwdriver, as they say, does not fall from trembling hands, you can safely proceed to disassembly.

Fan blowing

To blow the main or auxiliary fans from dust, you can use a hairdryer with a jet of cold air. Keep it a short distance from the cooler, just direct the air, blowing out the dust. The same can be done with the keyboard, but first it is recommended to shake it from dust and crumbs by hand.

Dry cleaning of the laptop (without vacuum cleaner)

Gently wipe the dust accumulations on both the body and the individual parts of the notebook. It is best to use a soft, dry, lint-free cloth for this.