Prefabricated models of ships of wood with their own hands. Description of work, drawings

Some people have a strange, but very remarkable and colorful hobby. It is called the assembly of ship models from wood. What is needed to make such a beautiful thing. The model of a sailing ship made of wood is not so easy to create. From this article you will learn how to create a ship model from a tree with your own hands. And also we make a short digression into the history.

Francis Drake

Many fans of history know the name of "Iron Pirate" Francis Drake his homeland was England. He became the captain of a sailing ship only at the age of 16. At first he was a ship priest, and then a simple sailor. But his fame really boomed when he became a brave and very formidable pirate. In the 16th century he made many voyages and took part in a number of battles.

Golden Lan

At the time of the dawn of the fortune of Francis Drake, several sailing ships arrived in his property. His main flagship was the ship "Pelican". This ship was a five-deck three-mast. On its board there were 20 artillery weapons. All sorts of sea stories rarely tell us that a ship that already has a name can be renamed, but it was with the "Pelican" that such a story happened at the behest of fate. In 1578, Francis Drake changed the name of this ship to "Golden Hind" (in Russian this name sounds like "Golden Lan"). It was under this second name that the ship was inscribed with glittering gold letters into the world history of seafarers. Francis Drake performed on it not a few dizzying acts, which later were told in history and adventure books.

It is these wonderful ships that compel many to collect ship models from wood with their own hands. Drawings of many similar designs can often be found on the Internet. So, inspired by the ancient history of navigation, we learn from this article information on how to do something like that.

Model of the ship from the tree by own hands: from the beginning to the rainbow horizons

In fact, the history of modelism consists of several stages. In this case, each of these stages is associated with several characteristics. Lovers of miniature shipbuilding need to be able to change the available materials. It is also important to expand the choice of modeling objects. After he has developed enough, then he can have a mass production of models. The next stage will be the development of exhibition stand modeling from those sets that he already has. In the future, you can develop and before the formation of individual segments. It can be anything you like - from ship models and flesh to copies of individual motorcycles, trucks, as well as all kinds of other cars.

Models of ships of wood with their own hands: drawings, instructions, tools

So, let's get down to building such a ship. Cut the model ship models from wood is not the easiest thing to do. You will need a lot of tools for this. Among them are: a knife, a chisel, a hammer, a bar (and if necessary, and a saw), a thin fabric, superglue, a long wooden spire, a rope, a drill. In addition, you will need two more important parameters. Firstly, this is time, and secondly, the important quality of those people who are engaged in the creation of prefabricated models of ships from wood is patience.

Cutting the ship out of wood

First you have to work with a chisel. You need to process everything with a file, plus remove old screws that have a flat head. It will take you not so much time - just two minutes. In these two minutes the pre-treated bar will later become a boat. Now you need to clean the bar. You should carefully scrape off the bark. Keep the bar directly in the direction of the tool. Take the standard design as an example for our small models of ships, which we will build according to the principle below. Take a pencil and sketch a preliminary sketch on the bar. In the wake of this, treat the bar with a sharp knife. The slope of the blade itself is reported to be at an angle of about 10 degrees. When you plan to take into account that this is not the easiest work, and therefore be patient. You should not forget that if for some reason you are mistaken, it will be difficult to correct everything. Remove the shavings layer by layer, while you should try and process the original bar as smoothly as possible. It is important that the upper and lower parts should be parallel.

Please note that you do not need to discard the shavings. The fact is that, in principle, it can be used as an additional material as mulch.

Carving of the front part and sides of the ship

Well, now we need to draw the front, bottom, and also the back. Cut them we will be absolutely exactly the same way, as it was mentioned above. It is necessary to make these parts even. In order for you to get the nose of the vessel, you have to saw off the piece in front. In the wake of this you should round off the saw with a knife. When you make a nose, try to tilt the very blade of the knife back. It should be directed to the stern.

Drilling holes and subsequent rigging

You should have a few spiers. Therefore, drill a number of holes, they must be somewhat larger in size than the beams themselves. It is important in this case that the holes were not through a lot of chur. Otherwise, you may have a crack. And because of the crack, as is known, there can be a severe disaster - to go leaking. Do not use glue! If you do this, then further work will take place with much greater difficulties.

Sailing on the model

Decide, first, how many panels you want to get on your final ship. Take for the condition that we will have four cloths for the first mast and the second, and three for the latter. In the wake of this, take a few wooden spiers and cut them. Cut out the fabric in the form of a trapezoid. Then start to glue them together. Make holes on the branches of the sails, fasten each branch with the appropriate notch. Then glue the edges to the sails. Repeat the same for all masts. It is best if you first build a rear mast, then an average, and then a mast.

Now let's fix the upper flying sail. Cut out a piece of cloth in the form of a kite. Take the thread and attach it to the opposite corner of the panel. Leave the ends on both sides for all angles. Glue a small piece of thread to the top of the boat. It should be slightly higher than the nose of the boat itself. Part from the opposite corner measure up to the middle of the lower branch of the sail on the front mast. Then, the very thread that you have measured, cut and paste the tip to the appropriate place.

On each side you have to leave a little thread. Pull them back and paste them straight into the boat. Then you can cut off the excess rope. Similarly, create and attach a back panel. It must be attached to the back of the rear sail. Measure, trim, and make sure that it fits two projections. Then glue them in the corners.

Well, now you have learned how to make the simplest models of ships from wood. And although in this article everything is described only in general terms, we hope that it will help you in your future career as a shipbuilder. If, of course, you are interested in this. Believe me, this is a worthwhile activity!