Plow for motoblock. Buy or make yourself?

A motoblock for a garden or a garden is an unquestionable helper. How can it hurt, when you bought this miracle of technology with only one cutter! After all, you are not available in this case, a variety of operations that would be free to perform such a machine. Still, it would be like to plow virgin land or a site on which for five years there has not been a revolution in the soil layer, or simply to introduce fertilizers into the soil. For these purposes, a plow for a motoblock is simply necessary for you as air.

In the main, plowing is carried out in autumn, when it is necessary to prepare the soil for the next year. The plow for the tiller cuts and overturns the soil layer. It forms large blocks and lumps, which, before planting crops, are necessarily broken by cultivation.

The plow for the motoblock is made from tool steel, so that it can withstand the corresponding plowing load. However, it is necessary to take into account the very density of the soil, so as not to overheat the engine and do not jam the motoblock.

The shape of the plow for the motor block is similar to the metal crest. To them he tears off a layer of land and turns it over. This is facilitated by the special shape of the instrument, as well as the expansion of the ridge at the top point.

How to buy a plow for a motoblock? Practical tips

When purchasing a plow for a motor block, it is necessary to carefully monitor that it has the manufacturer's necessary adjustment capabilities: the slope angle and the depth of cutting the soil layer. Only having such settings, your work will be full and effective. There are several models of plows for motoblocks, among them: PL-2KM, PL-TYAZH-UN, PL-KIP, PL-UN 220, PN-1, PN-Junior, PL-GN-151, PN-Pubert, PL-OB , PN-Pubert and Futura 6 plow-blade. "It is also necessary to pay attention to the possibility of cutting the knife from the plow for the possibility of sharpening, which will allow cutting its cutting edge easily and at the required angle.

An important indicator when you choose a reversible plow for a motoblock is its size. After all, with a huge size, the unit can not pull it, and with a small enough to work effectively. You can, of course, apply two plows to increase the productivity of labor, then the seizure of such a tool will increase, respectively, by half. It is also desirable that the plow has a hitch that can facilitate the adjustment process. Let's consider, how it is possible to make independently a plow for motoblock.

Self-made

The very fact of making a plow for a motoblock is not difficult. You can do without even special equipment. Only by taking for the working elements the steel of the required thickness (3-5 mm) and using a tool that is in the garage of each self-respecting owner.

We begin the manufacture of the share. It is made removable, for example, from the circular saw blade. In this case, the cutting part is beaten on the anvil, as it is done for the braid, and further sharpened.

After that, a blade is made, taking as a billet a pipe of half-meter diameter with a wall thickness of 5 mm. Then, by template, the blade is cut by gas welding, which is then grinded by the Bulgarian. When these two parts are ready, it remains only to make the plow body of steel 2-3 mm and assemble the structure.

As you can see, a self-made plow for a motoblock is not such a difficult task if you approach creativity and enthusiasm.