Plastic windows: summer and winter mode, adjustment and adjustment

Now it is easy to adjust the produced plastic windows. The summer and winter regimes, which are regulated in the autumn and spring before the sudden temperature changes, make it possible to change the clamping force, which makes it possible to vary the degree of ventilation.

The procedure itself represents certain manipulations that may be required immediately after the installation of a new double-glazed unit. This is a kind of preventive repair, which makes it possible to assess the readiness of window constructions for a particular season.

What do we have to do?

After you bought a plastic window (summer and winter mode), adjusting, adjusting them is quite simple. For this, several simple steps should be followed, namely:

• Open the sash. At the end of most designs is a cylindrical convex head, called an eccentric or a trunnion. There can be several such elements.
• It has a pair of slits, one of which is longer and the other shorter.
• In the middle there is a hole for the key.
• In the event that a short slot is aimed at the rubber gasket of the window, then the pin is set to the summer position, with the back position - winter mode.

Turn the eccentric with a suitable hexagonal wrench or flat screwdriver. It is often practiced to change the position of the eccentric just by fingers, by pulling the adjusting mechanism and turning it.

The difference between the maximum and minimum cusp of the leaf is 0.2 cm, which is enough to increase the fresh air intake.

What gives the adjustment of windows?

It should be borne in mind that the plastic windows, summer and winter mode in which it is provided, are adjusted according to the force of the fitting of the leaf. In the cold season, this process makes it possible to strengthen this indicator, and in the summer the pressure is weaker to increase ventilation.

Quite often, the eccentric slot is located parallel to the edge of the window leaf. In this position, it happens if the design comes directly from the manufacturer (a universal arrangement that differs from the "winter" or "summer" positions by only 1 millimeter).

In winter, the orientation of the trunnion is aimed at creating additional pressure on the rubber seal. Experts advise not to install this element on new windows, avoiding a neutral position or a summer option. Sealing rubber is an important element in the construction of plastic windows, for this it is processed by silicone, which allows to extend the service life.

Plastic windows (summer and winter mode): correct adjustment

The main advantages of plastic window constructions include a high index of tightness, which does not create drafts and allows you to maintain a normal microclimate in an apartment or house. After a long operation, the leakage characteristics may change, which is due to a variety of reasons. For a design that is already in use, breakdowns are characteristic, which reduces this function. Such a violation often leads to the creation of an unstable microclimate in the room.

What is the benefit of adjusting windows?

After the plastic windows (summer and winter mode), which need to be adjusted in a timely manner, are adjusted accordingly, the following effect is achieved:

1. A stable climate is formed inside the room with a constant maintenance of the temperature regime.
2. It eliminates the ingress of cold air masses in winter by eliminating the presence of through gaps.
3. A constant level of humidity is maintained.
4. The financial resources that were used to pay for heat and electricity services are saved.

If done correctly, plastic windows (summer and winter mode), adjustment and adjustment of which does not require much effort, will last long, reliably and functionally in accordance with the season.

Features

Different mechanisms of plastic windows may have differences in design. This is due to the different number of eccentrics and their configuration. Some products have cylinders located along the perimeter of the sash, other samples are equipped with a trunnion with an upper or lower hinge arrangement.

In order to properly adjust the plastic windows (summer and winter modes), the adjustment changes must be made in the appropriate period. You can independently check the position of the trunnion. To do this, perform the following manipulations:

• Eccentrics, located at the top, you can check if you open the sash.
• Then turn the handle and flip the element to the airing position.
• Such operations are characterized as opening the window in a rotational direction at an angle.

As a result, the necessary mechanism will be visible, located in the area of the scissor-shaped parts of the window.

Conclusion

Plastic windows (summer and winter mode), the adjustment of which consists of moving the eccentric to the desired position, are adjusted by simply turning the hexagon key counterclockwise.

After the perfect action, the trunnion moves to the desired position and is set to the desired level. Once all the details are in place, the preparation of the window for the winter period can be considered complete.

In addition, you should check the condition of the hardware. All loose and defective attachments must be replaced, repaired or secured.