Jigging machine with their own hands: drawings, diagrams and reviews

The jigsaw machine allows you to quickly and efficiently cut wood. The standard model consists of a working surface, racks, a motor and a spindle unit. Some devices are made on supports. Fixators are often installed in the side of the work surface. Also worth noting that the models differ in power. The jigsaw can be manufactured only by following the instructions.

Desktop devices: expert reviews

If you believe the reviews, then make a desktop modification is very simple. First, the rack is prepared under the work surface. Its width should not exceed 30 cm. The motor is more suitable for selecting a single-phase type with a limiting voltage of 220 V. The self-made jigsaw machine (desktop) produces an average working frequency of 55 Hz.

Experts say that it is better to use yew from steel, if desired, you can cut them yourself. The saw is mounted on the spindle unit, which is attached to the rack. Many models use a retainer, which plays the role of an abutment. To fix the file, a small screw is used.

Models on legs

If necessary, you can make this jigsaw with your own hands. The modification drawings include frames of different sizes, and the spindle assemblies are generally used with guides. Many models are made on a wide bed. The legs can be installed from the tubes. Also there are machines with plates. After cutting out the working platform, it is necessary to tackle the spindle knot.

If we consider devices with control units, then the model requires a controller. The motor is more expedient to apply collector type on 220 V. Teses on jigsaw machines are established rotary type. The direction must be welded to the edge of the plate. The saw should be securely fixed in this case. The optimum height of the spindle unit is 2.2 cm. At the end of the job, it is important to install the power cable and connect the equipment.

Reviews about devices with a wide frame

Professionals are able to assemble the jigsaw machine with their own hands. The device drawings indicate the presence of wide stops. However, first of all you need to install the frame. If we consider a simple machine, then the fixator for modification can be selected in a short length. Experts' comments indicate that there are two racks for the model. A welding inverter is used to assemble the machine. Directly the spindle assembly is installed in the central part of the working platform. The hole for the saw can be made a cutter. It is also worth noting that experts do not recommend using two-phase motors.

Compact Modifications

Following the instructions, you can assemble a compact jig saw with your own hands. The device drawings include double racks and narrow frames. The frames are used with a low profile. Many models have a spindle assembly without a holder. In this case, the guides are set to short lengths. For self-assembly of the model, it is recommended to first choose a quality frame.

Additionally, the fastener is soldered under the working plate. To reduce the level of vibration, you can use a lining. To fix it, the usual glue is used. The saw for modification should be selected with a small thickness. The optimal installation distance of the central node is 14 cm. At the same time, the width of the platform is on average 17 cm.

Jigsaws for 2 kW

If you want, you can make this jigsaw with your own hands. The drawings for the assembly of the modification can be found very simply. As a rule, frames are used with a width of 35 cm. The thickness of the plate should be about 1.5 mm. The hole for the saw should be made before the installation of the central unit. If we consider models without stops, the frame is used with a low profile. It is also worth noting that the spindle knot is more appropriately installed on the lining.

To reduce the noise level, a casing is used. Many models use several stops. In this case, the unit is installed at a height of 10 cm. It is better to fix the file on the plate. The clamp can be screw-type. After fixing the central unit, the motor is placed. To modify this type, a device with a single-phase unit is suitable.

Models of 3 kW

At 3 kW desktop jigsaw with their own hands to do quite simply. Experts recommend using racks with wide stops. Lockers must be installed only after the central unit. The saw for modification can be selected by 1.2 mm. Some experts make a hole after installing the frame. In this case, the supports are soldered to the sides of the table.

Further it is important to estimate the size of the spindle. The motor is more suitable to use with a protection system and a casing. It is also worth noting that collectors are very popular, which operate at a frequency of 45 Hz. They have low energy consumption, and they do not overheat. Holders are used to fix the workpieces. The optimum height of the spindle is 15 cm. It is also worth noting that there are models with tuning plates. A flywheel is used to control the rack. To install the control unit there is a conventional controller.

How to make a 5 kW device

Having prepared a few stops and a spindle unit, you can make a jigsaw machine with your own hands. Experts' comments indicate that models of 5 kW are well suited for longitudinal sawing. Before starting work, all the necessary tools are prepared. It will take a saw, a grinder, and also a welding machine and a milling cutter. Frame for jigsaw machine is more expedient to collect from steel plates with thickness from 1.3 mm. For the motor, you must immediately provide a place. The frames in the devices are installed in a high profile.

At this stage, you can immediately cut out the hole for the saw. The plug-in unit must be mounted on the top of the plate. In addition, it should be noted that a large holder is required for the saw. If we consider a simple model, the racks can be installed on the sides of the frame. Tissues are used rotary type. At the top of the frame there must be a rack. Under the engine is selected a small casing. On average, the width of the frame should be 35 cm. If we consider professional models, then they use adjustable clamps.

Modifications to two quilts

How to make a jigsaw machine with your own hands? The model with two quills is assembled only on a wide frame. First of all, the plates are cut out under the frame. If we consider the desktop modification, then the control unit is more suitable to install at the top of the device. The optimum frame width is 45 cm. The spindle unit is installed behind the stops.

For the pillars, a swivel bracket must be provided . Many models use transmission blocks. The motors are suitable only for collector type with a frequency of 30 Hz. The saw is installed as standard in the holder. The optimum height of the spindle unit for the models is 35 cm. The pinols for adjusting the frame are used with the flywheels.

Models for three quills

On the basis of a single-phase motor, it is easy to make this desktop jig saw with your own hands. Tools should be prepared in advance. Many models are equipped with frames for four stops. They have a long length and a high profile. It is also worth noting that spindle knots are selected with a belt drive. In the beginning of work it is very important to calculate the length of the frame. If we consider the usual spindle knots, then the stand under them is prepared for a short length.

The central support must withstand heavy loads. A welding inverter is used to install the plates. The motor will require a casing, which will significantly reduce the noise level of the device. The saw for this type of modification is suitable for 1.2 mm. At a power of 3 kW, a three-pinion device will produce a frequency of 55 Hz. To fix the flywheels you need brackets.