Paint "Dufa" (Dufa): types, characteristics, reviews

The trade mark "Dufa" refers to the famous German concern Meffert AG Farbwerke, which is one of the largest paint manufacturers in Europe. For twenty years the Corporation has been producing environmentally friendly products in the form of water-based paint and other paint and varnish materials for both internal and external finishing of various surfaces. The paint "Duf" attracts the attention of customers with a logo, which shows the hedgehog pattern (it is available on all products of the German company Meffert).

Assortment of paints "Duf"

The assortment of Dufa varnish-and-paint products is quite impressive. Due to the wide variety of paints, it is possible to choose the type of coating that will most suit the specific conditions. There are moisture resistant types of paints, which are represented by such varieties as Superweiss, Raumweiss and Malerweiss. They can be tinted in different colors. And for the Dufa Megaweiss paint, there is no need to do this, since the surface already turns bright white.

Another variety of Dufa products is latex paint, which can be used for both internal and external decoration. In addition, it has increased wear resistance. This kind of paint is used when covering walls and ceilings from any surface, be it concrete, cement, brick or plaster.

There are in the market of building materials and cheaper varieties of paints, which are used for dry premises. The Dufa products for facades are used in combination with special impregnating compounds and primers to protect the surface from all kinds of atmospheric influences.

To obtain a coating that will resist the spread of various microorganisms and fungus, the "Duf" paint is applied on a silicone compound. It has increased resistance to fungal microorganisms.

Painting of wooden surfaces: which of the Duf paints is more suitable

To paint any wooden surface both inside and outside the premises, you should use Dufa Seidenmattlack enamel based paints. Inside the premises it is recommended to use acrylic varnish-and-paint products Dufa Acryl Watteschutzfarbe, which is intended for wood, windows, various boxes and other wooden buildings. It is able to create a glossy washable coating of different colors. Any wood surface before painting should be impregnated with an antiseptic and a primer, and then apply varnish or enamel on wood.

Dufa façade paint and its application

Houses and various structures acquire their particular beauty mainly due to the color and grooming of the facade. On such structures it is pleasant to look both to the owner, and passers-by. This effect is possible due to the use of modern facade paints.

In addition to the decorative function, such varnish-and-paint products also perform protective - protects the facade from the destructive effects of the atmosphere. For these tasks, the facade paint "Duf" is very suitable. Let's consider its advantages.

Protection against atmospheric influences

What is the protective function of such a paint for facades? Particles of brick, building stone and mortar, concrete surface and other materials can be washed out due to running water during rains, snow. Especially detrimental to the integrity of surfaces, when the precipitation adds wind, as the force of impact on her increases. In addition to mechanical moisture also has a chemical and physical effects.

Protection from all this is provided by the Dufa varnish-and-paint products. The paint of all varieties of the famous German concern very well protects the surfaces from most kinds of atmospheric influences.

Protection against chemical and physical effects

In industrial areas and areas with a large number of vehicles, surplus substances such as nitrogen oxides, phosphorus and sulfur, which in conjunction with moisture form dangerous acid rain, arise . If the level of acidity is increased, even the most common precipitation can cause a significant damage to the coating of buildings and structures over time.

In addition, even a country with an ecologically clean climate does not guarantee the absence of mineral salts that are in the ground and are raised by water on the capillaries of the walls. Such salts are capable of leaching astringents from stone surfaces, which is a serious prerequisite for their destruction.

Another damaging effect that moisture exerts on the surface is the creation of cracks. Different material absorbs water in its own way: brick and porous building materials - very much, granite - almost does not absorb. The process of water absorption leads to the swelling of stone surfaces.

Particularly unprotected are places near the joints made from cement or limestone, which are usually highly porous, which leads to the formation of areas with constant humidity. When water enters the boundaries of materials, strong stresses appear, and when the strength of the stone is insufficient, cracks form.

A good guarantor of protection against such types of influences is also the products of the German Dufa trademark. The paint is divided into three main groups, depending on the basis of the surface to be painted: for metal, wood and stone.

Recommendations for the correct work with the paint "Dyufa"

"Dyufa" covers well enough and fills the surface of the facades, due to which it is in great demand among farmers and dacha owners. It perfectly fulfills the functions that were mentioned in the article earlier: it gives the buildings beauty and expressiveness, and most importantly it is a strong protector against environmental influences.

With the right choice, the paintwork will have good adhesion to the surface material. Dyuf paint is used in addition to exterior decoration indoors, where it can create glossy surfaces that are resistant to erasure.

When performing painting, the ambient temperature should be above 5 degrees Celsius. When carrying out the painting, it should be ensured that there is access to fresh air, and after its completion, it is necessary to ventilate the room until the smell of paint disappears completely. The used tool is thoroughly laundered. It is recommended to work in rubber gloves to avoid contact with the skin.

Tips for storing the paint and varnish products "Dyufa"

In the storage of imported paint there are no special recommendations. It is necessary to follow the general tips for working with paint and varnish products:

• To keep in sealed packaging, in places not accessible to children;
• Protect from direct sunlight and frost;
• In case of contact with eyes, rinse immediately with running water and seek medical advice;
• It is necessary to follow the recommendations of instructions and other normative documents when painting surfaces.

Preparation of the base for painting

Products "Dufa" suitable for painting any surfaces that are suitable for processing. The colors of paints for walls are distinguished by a wide range. However, one should take into account that the preparation for painting works should be based on the features of the surface for each specific case.

To avoid the formation of stains due to the different absorptive capacity of the surface areas with plaster, it is necessary to produce a fluting. It is a specialized treatment for recently applied plaster, which has a high absorbency. With the help of it, the effect of uniform absorption of the paint is achieved. If the plaster absorbs the paint very strongly, it should be treated with a primer.

The rest of the old paint must be removed, and the existing cracks and cracks - to handle and isolate.

Important advice: Do not apply a durable coating on a weak base. They must have the same degree of strength.

Surface painting works

The paint should be applied in two layers. The first stage - the main painting is done. It is allowed to dilute the paint with water. The percentage of dilution is calculated individually for each specific case.

The next step is not to dilute the paint. For application, use brushes, rollers or spray.

During painting, care should be taken to ensure a uniform distribution of the paint over the surface.

White paint is a good option for its application on the walls of country houses and arbors. She looks good.

A good adhesion of the paint allows it to be applied to a variety of surfaces. Tile, smooth-fiber materials, concrete products - all of them can be used for painting. In this case, the paint should be diluted with water in a ratio of one to ten. The adhesion of the base with the coating will be very strong, which will simplify the painting of the surfaces in the future. Colors of paints for walls from such materials can be chosen any. But the best option is to use light colors.

The most used varieties of "Duf" paints

German company Meffert produces high-quality paint products. Nevertheless, buyers for the most part choose basically two varieties of paints of a popular German concern.

The paint "Duf Supervice" has an excellent hiding power and has a high level of whiteness. It is very economical and high-quality. Painting of especially dirty surfaces is carried out in one layer. In doing so, the desired result is fully achieved.

For tinting on the computer there are varieties of this brand of paint in three bases. Its quality is confirmed by an independent society of German consumers. The white paint of this brand is environmentally safe, does not have harmful particles and solvents in its composition.

It is recommended for painting walls and ceilings in rooms with standard and increased load. Moreover, under this criterion suitable wet rooms - kitchens and bathrooms.

The paint "Dyufa Matlatex" is another brand of the Meffert paint and varnish products, which has gained great popularity among consumers.

It is latex and is used only for interior work. This paint is able to create a strong vapor-permeable coating, which has increased resistance to wear and any mechanical damage. It is perfect for painting mineral substrates (plaster, drywall, fiberglass wallpaper).

Price of Dyufa varnish-and-paint products and reviews about it

Apparently, the best use for painting surfaces will be imported paint and varnish products, and in particular, the paint "Duf". Its price varies widely, depending on the required characteristics, type of packaging, color. The cheapest options can be found at the manufacturer. In Russia, such an enterprise is located in the city of Reutov. It has the exclusive right to manufacture and distribute such building material as Duf paint. The price for it is within two hundred rubles per liter. In stores, the price for such a paint is about five hundred rubles.

German company Meffert is producing not only paints, but also other paint and varnish materials that accompany the painting process.

In a rather impressive range are mixtures for priming, protection from fungus and mold, materials for puttying, solvents. Therefore, you can choose any formulations suitable for preparing surfaces for painting, the variety of "Duf" paint is diverse. Reviews about it are only positive. This is not surprising, since it is distinguished by high quality and wide possibilities for application.