Metal detector X Terra 305: user manual and reviews

In the segment of electronic metal detectors the family X-Terra from the company Minelab firmly holds if not leading, then one of the leading places. The manufacturer seeks to maintain its models in basic qualities, and actively assimilates new technological solutions. In this regard, the modification of the X-Terra 305 is not breakthrough and revolutionary, but it demonstrates an example of an organic combination of the main operational parameters. The detector features low weight, wide settings and an ergonomic control system.

General information about the model

The detector is a continuation of the concept, once incorporated in the modification of the X-Terra T34. However, the new version has little in common with the previous generation, differing in terms of functionality and performance. The device operates at two frequencies - the bottom and top. The first, at 7.5 kHz, allows the user to scan the soil layer at great depths, and the second frequency point, at 18.7 kHz, is more effective than the surface itself, but works better with the search for small objects. The metal detector Minelab X-Terra 305 and the anti-jamming system VFLEX differ, which, however, all representatives of the new generation line are equipped with. The presence of this function not only eliminates interference, but also increases the detector's ability to recognize metals. To this possibility it is necessary to add also a wide range of settings for depth and sensitivity. Competently using the adjustment settings, the user can significantly increase the chances of success.

Assembly instruction X-Terra 305

The assembly process begins with the coil, which is attached to the end of the bar. First of all, you have to assemble two parts of the functional ring, then bring it through a special connector with the holder. Fastening to the rod is carried out by means of a plastic screw and complete plugs. Next, connect the end of the rod with the coil and the second part of the holder. This is done through the screw on the end of the second part of the rod. It must be loosened, and then insert a second segment with a coil into the hole and reinstall it. After installing the armrest with screws, you can mount the X-Terra 305 detector control unit. The instruction indicates that this component should be fixed through a special hole on the handle located at the top. The block is set up with a slight effort until it clicks. It is important to note that the display must be facing the upper side during installation.

User's manual

Before using the detector, it is necessary to make its settings. To simplify this step, it is possible to resort to automatic adjustment, in which the apparatus independently performs optimal adjustments to the search modes based on a given target. But experts still recommend more often to apply to more detailed manual settings. Thus, for example, you can make adjustments on the ground with detuning the device from soil interference. In any case, the user should specify through the menu of the search tasks, to which he will be guided. Next, you can proceed to the direct operation of the X-Terra 305, after making sure of the full charge of the power supply unit. During the search, you should gently hold the device through a special handle, leaning with your hand on the armrest. Movements should be made from side to side - so that each new passage slightly covers the previous line. In this case, the coil should always be parallel to the ground surface.

Positive feedback about the detector

The owners of the model first of all note a rich set of options and by themselves the possibilities of searching at great depth with effective detuning. To this, many add an ergonomic menu with a liquid crystal display, which conveniently displays all the necessary information about the operation of the detector. Again, with regard to operational properties, the device surprised many at the present level with the realized volume control, frequency and tone mode change . Attention is also drawn to the external performance of the X-Terra 305. The reviews indicate the ease of construction and comfort in handling it, although the previous versions did not present any special problems in such aspects. As a result, it turned out to be ergonomic, economical in terms of energy consumption and at the same time a productive metal detector.

Negative feedback

Still, the device applies if not to the budget for today, then at least to the average level of metal detectors. Hence, inevitably followed by some flaws, marked by the owners of the device. In particular, the model is criticized for the insufficient reliability of fasteners. It has already been noted that plastic parts are used at the junctions of individual parts, and this decision is questionable for many users. In addition, the metal detector X-Terra 305 is provided with rather weak collet fixators, which can lead at a critical moment. But otherwise, there are almost no complaints about the reliability of the structural device of this model. The manufacturer mainly uses a high-quality element base, which prevents the risk of serious machine failures.

Conclusion

In the initial class of metal detectors there are many devices with similar capabilities. Even in terms of price, the development of Minelab has many competitors, provided with similar functionality. However, this version is distinguished by the effective manifestation of its abilities in the practice of exploitation. Already in the process of searching, the advantages of interference protection, and the advantages of setting the detuning, as well as the rich settings in terms of designating the target material are noted. Of course, we can not say that the X-Terra 305 is the best choice in its class, but in some respects its separation is obvious. For example, it is worth noting the convenience of assembly. The kit itself is quite lightweight, which allows it to be transported without problems. From the user it is only necessary to determine the objects of the search and make the necessary adjustments in the settings of the device, corrected for the working conditions.