Installation of the refrigerator: rules and advice. New refrigerator: instruction manual

A large number of consumers after buying new home appliances have to pay for additional services to installers or installers. Although some of the work can be done independently, without the help of qualified masters. For example, the installation of a refrigerator, especially a separate one, does not require special experience. Even the built-in device can be mounted without skills, it is enough to get acquainted with the general recommendations and advice of specialists.

Installation of a freestanding refrigerator

The installation of a conventional refrigerator does not involve complex manipulations, so anyone can cope with such a process on their own. The main rule is to ensure regular supply of electricity. Therefore, in the first place, it is better to connect a separate uninterruptible power supply to an ordinary outlet. It is better to spend an additional several hundred rubles and be sure of the safety of the device, since all refrigeration equipment is difficult to repair.

Before you go to the store, you need to measure the amount of space in which it is planned to enter the device. It is important to understand that the new refrigerator should never be placed in close proximity to the plate or other heating elements. It is also recommended to avoid direct sunlight. This is due to the fact that the efficiency of the work can also be reduced.

Do not install the refrigerator against the wall. The minimum distance from the device to the wall is not less than 9 cm. The legs and other supporting elements must be firmly adhered to the floor, this will contribute to the quality work of the compressor and to minimize noise during the operation of the device.

Built-in refrigerator: installation features

Such devices are becoming more popular among buyers. Built-in technology saves space, in the process of its work creates less noise, with its help you can keep the unity of design. The quality and functionality of the installation often benefits from traditional devices.

Built-in home appliances has its own features, which should be taken into account when installing the case and the device itself. The independent installation of the built-in refrigerator should be carried out in accordance with the following requirements:

1. The front support (as a rule, it is made in the form of small legs), it is necessary to untwist a little so that the door closes tightly and the cold does not come out. The slope should be about 1-2 degrees.
2. If there is a hob or an oven next to it, the built-in refrigerator should be installed at a distance of at least 7 cm. Close-lying heating devices will interfere with the full operation of the compressor.
3. The platform on which the device is installed should provide a flat surface horizontally and vertically, this will help to avoid strong noise and buzz during operation.
4. The niche in which the device is built in should provide free air circulation, in order to avoid overheating of the device. Therefore, when constructing a cabinet, it is necessary to have a margin of several centimeters in width, depth and height relative to the dimensions of the refrigerator.
5. In accordance with the instructions for installing the refrigerator, all wires must be grounded.
6. Best of all, if the niche in which the device is built in, there will be no back wall.

Where to begin?

Before proceeding directly to the installation, it is necessary to familiarize yourself with the enclosed instruction. As a rule, some modern models may have additional requirements that are mandatory for implementation. For devices that support the functions of the latest developments (for example, smart refrigerators), additional installation conditions are required to optimize their operation. Even before buying it is worth studying the requirements for the place of their installation.

Before installing the refrigerator directly, be sure to check the power cord for factory defects and damage. If deep scratches or other defects were noticed, it is recommended not to use it, but replace immediately. This will avoid a power failure, which can lead to serious damage. Installation of the refrigerator is done at a pre-arranged place. The most important thing is that it is even (to avoid distortion).

Rules for installing a refrigerator

If the device is detached, the connection will not take much time. If the installation site is already prepared, then immediately after delivery it can be put in place. Here, it is necessary to adjust the horizontal level so that the door can be slammed without much effort. It is worth noting that the refrigerator should always remain in a stable position. It is necessary to recheck whether the ice generator and other components are connected correctly. Incorrect installation of the refrigerator by level is the main reason for uncharacteristic noise during the operation of the device. Therefore, the masters recommend that you pay special attention to this moment.

Before connecting a new refrigerator to the network, allow it to stand indoors for at least 12 hours in order to adapt to the microclimate.

You can put products only after three hours from the moment of connection.

Operating instructions for the new refrigerator

It includes five main stages:

1. The correct process of transportation. It is not recommended to tilt the device under 40 degrees so that the new refrigerator does not fail. The device must only be transported in an upright position. If such transportation is impossible, then the refrigerator should be transported on its side. After installation in place, allow it to settle for at least 24 hours to stack the entire refrigerant.
2. Accommodation in the prepared space. The installation site must be chosen in such a way that the distance from the heating elements is at least 7 cm. Also, do not put the refrigerator close to the rear wall, the air circulation should be free.
3. The installation process. After the device has been unpacked, it is not recommended to immediately release the loaders. First, you need to check all the components and the presence of factory rejection. If defects were found, then the problem must be solved on the spot.
4. Cleaning in the inner space. Of course, before the operation, all the shelves should be wiped with a solution containing soda, or a special disinfectant.
5. Timely defrosting. This process will help to get rid of excess ice in the freezing chamber (in the case of a drip defrost system) and to normalize the operation of the compressor.

Conclusion

Only the correct installation of the refrigerator can guarantee comfortable use. It should be understood that in the event of improper installation and connection of the household appliance, the consumer loses the right to carry out repairs under the warranty coupon.