Inflatable boat "Taiga": review, characteristics

Inflatable boat "Taiga" is an economical, light and reliable boat, which is produced by the company "Leader" from St. Petersburg. The product is notable for good layout, security and affordable price. The vessel is not inferior in terms of gliding and seaworthiness parameters to many similar modifications. As a rule, small power units of up to ten horsepower are used for traffic. The device is made of PVC materials and can be used without registration in the department of GIMS.

general information

Boat "Taiga" is equipped with a body, the base of which is made of inflatable PVC-ballon, the density of the material is 750 grams per square meter. The skeleton itself is constructed of trapezoid parts, which made it possible to reduce the cost of the ship and save on the component parts. Joints and joints are fixed by welding and are glued with polymer tape. The diameter of the balloon is 380 millimeters.

The interior of the boat is divided into three independent sectors. The vessel in question is being manufactured in several modifications, which differ from each other in the assembly. All models are designed for movement on water using oars or an outboard motor. Vessels are equipped with a flat tension head and a hard deck from the dial-type 9-mm slats. Pionol is H-shaped profiles of aluminum.

Boat "Taiga-320": characteristics

Structurally the swimming device is made according to the standard scheme: inflatable ballon made of PVC, wooden elements of the plywood deck treated with waterproof coating, oars and guides - made of light and strong aluminum alloy.

The main characteristics of the "Taiga-320" PVC boat:

• Width / length (m) - 1.42 / 3.2;
• Cylinder diameter (mm) - 380;
• Index of carrying capacity (kg) - 380;
• Capacity - three people;
• Recommended power for the hinged power plant (hp) - 5-10;
• Weight of the product (full) - 36 kg.

You can note the good equipment of the boat. It includes:

• inflatable boat;
• Four slaves;
• Two longitudinal and a pair of transverse guides;
• Pump pump with a sleeve, paddles;
• A pair of seats, two packing bags.

In addition, each kit is equipped with a repair kit, first aid kit and instruction manual.

Boat "Taiga-270"

Domestic motor-rowing modification with a stationary transom is a universal vessel for calm reservoirs. The package includes a pair of hard seats, collapsible oars, a wire rope providing additional safety for passengers. The forage and bow of the boat are equipped with handles for transportation, a fixed type trench made of waterproof plywood fixed rigidly on cylinders. The sections are joined by an aluminum profile, the pion is made of Finnish waterproof plywood. Also included is a passport, repair kit, pump and a packing bag.

Dimensions and characteristics of the PVC boat "Taiga-270":

• Length / width (m) - 2.7 / 1.25;
• Product weight (kg) - 28;
• The maximum indicator of carrying capacity (kg) is 220;
• Capacity - two people;
• Maximum power of the outboard - five horsepower;
• Dimensions in the packed form (mm) - 1005/500/350.

The vessel's material of manufacture is resistant to rotting, corrosion, salt water, it can be operated at a temperature from -40 to +60 degrees.

Assembly and disassembly

The boat "Taiga" in preparation for work is collected in the sequence specified in the instructions. The durability of the product depends on the correctness of this process. Manipulation is performed on a flat clean area. Slides and stringers must be mounted in accordance with the marks on them.

Pumping air is performed by a regular pump or model approved by the manufacturer. It is necessary to exclude the use of compressors, as this can lead to excessive pumping and deformation of the joints. The process should be distributed evenly across each compartment.

It is necessary to clean the air valves in a timely manner, which are responsible for the tightness and equipped with special springs. The inflatable boat "Taiga" must be clean and dry before disassembling. It is not recommended to pack the product in wet form, as this is fraught with deformation of the kit.

Operational nuances

Visiting the reservoir, especially unfamiliar, it is advisable to get acquainted with its features and conditions of navigation. The first thing after assembling a PVC boat is to inspect it for damage. A small repair can be done using the standard kit.

It is better to postpone traveling on a ship with a large wave or strong wind. The cargo is placed evenly in the compartments of the cockpit. If the trip is planned alone, the best place for him will be the bow. Do not exceed the manufacturer's recommended passenger capacity and capacity.

If the movement is carried out with the help of oars, the rower should steer them smoothly and evenly, checking the reliability of fixation in the oarlocks. Boat "Taiga" is not intended for use of a motor with a capacity exceeding 20 liters. from. Ignoring this point can lead to loss of controllability, especially when passing through bottlenecks, reefs and sandbanks. When the temperature is changed drastically, it is advisable to check the pressure in the cylinders and to bleed or puff up the air, if necessary.

Reviews

Most users note that the inflatable tug "Taiga-320" has a high quality of manufacture with smooth, non-stitched seams, reliable fixation and practical component parts. Excellent indicators are given by the ship in rowing mode and on the motor. Strong banks and slides provide the necessary rigidity. The assembly of the boat takes no more than 15 minutes.

Some owners note the inconvenience of packing the boat in two bags, as well as the lack of additional protection for the hull, which requires a particularly careful attitude in places where there may be the presence of sharp stones or plants with spikes. Another small disadvantages can be attributed to the moment that when in cold water after 15-20 minutes, stringers must be additionally sedated, after which the floor becomes even and hard. In general, the product under consideration is a universal, practical and inexpensive boat that meets modern parameters.