Huter BS-52 chainsaw: description, specs and reviews

Huter BS 52 - chainsaw, which is equipped with a 50-centimeter saw bar. It works at the expense of an engine with a power of 3.4 horsepower, and to prevent a negative impact on the operator's joints, the tool is equipped with an effective vibration damping function. It is also convenient that the chain is lubricated automatically, so the owner does not have to worry about this during the use of the tool, which makes the operation easier.

Description

Huter BS 52 - chainsaw, which has a household purpose, but can be used to solve semi-professional tasks. The length of the tire is 20 inches, this information is provided in the instruction manual. Among the distinguishing features - high performance and easy management, the latter is very important for an operator who previously had no experience with such a tool.

The powerful engine facilitates rather fast performance even the most difficult cuts which are carried out at work with dense materials (basically wood). This equipment has an ergonomic handle and a chain brake function. The weight of the model is 7.5 kg, which is true for the equipped tool. Due to the fact that the tire is long enough (50 cm), the master will be able to perform complex tasks for sawing thick boards and massive logs. A powerful motor allows you to work at high speed, and automatic chain lubrication makes maintenance easy. For increased safety, the chain brake is used, and the controls are located very conveniently.

What else is necessary to know about the main features

Huter BS 52 - chainsaw, which can be used for a fairly wide range of tasks. The advantage is also in autonomy, because the device you can use without external power sources. When working quite often there is a need for sawing large diameter logs, this will help a long tire. The engine generates 2.2 kW of power, and a special anti-vibration system between the drive and the tire reduces the impact on the hands, increasing the possible operating time.

Lubrication facilitates movement, preventing premature wear and overheating of the working part of the equipment. Toggle switch off and ignition, lock keys are arranged in such a way that the operator can manipulate them, completely without weakening the grip of the instrument. If the jamming or sharp throw is triggered, the chain brake will help, which is activated instantly. Among other things, the manufacturer took care of the maximum easy access to the air filter.

General information

Huter BS 52 - chainsaw, which allows you to saw the material in any direction. The equipment has an engine, the working volume of which is equivalent to 52 cm ³ , it has an easy-detachable filter. Fuel is a specially prepared mixture, which consists of gasoline and oil. When preparing, use a ratio of 25 to 1.

The capacity of the fuel tank is 550 ml. The front part of the case is girded with a strong transverse handle, it is convenient not only for holding, but also for grasping the tool. The handle for the second hand is located at the rear and has a longitudinal orientation, while performing the function of the control panel of the chainsaw.

Application area

Huter BS 52, which you can read about in the article, can be successfully used to solve domestic and semi-professional problems. It is autonomous, irreplaceable for work at the dacha, as well as in the garage. Do not do without it and the owners of country houses, before which periodically there is a need for care of the garden. When harvesting firewood, this chain saw is also needed. With this equipment, you can easily turn the remains of buildings and old furniture into firewood, this applies to thick branches, as well as cut trees. This tool will be useful in carrying out rescue, as well as repair work, in the process of private construction. For hikers hiking the chainsaw will be an assistant in the preparation of the camp. German specialists have invested in this tool modern achievements in technology and science, so the equipment meets strict world standards in the field of safety and quality.

Specifications

Many consumers are interested in such a characteristic as the step of the chain. For this equipment, the manufacturer specified this parameter in inches, and it is 0.325. You may be interested in the width of the groove, which for this model is 1.5 mm.

The complete set includes a chain, a tire, and also a metal gear stop. The dimensions of the packed goods are 440x290x320 mm. The chain contains 76 links. There is a mechanism of inertial chain brake. The operator will be able to operate at the same speed, in the event of a back blow, the chainsaw will stop working.

Customer feedback on performance

Similar chainsaws, the prices for which will vary depending on the model, usually have the most positive feedback from consumers. The described variant will manage to the buyer in 6000 rbl. According to users, the unit is started from a half-turn, when the engine is warmed up well. From the first time, there is sometimes a need to start up several times, this also applies to the running time of the tool.

As a disadvantage, buyers allocate a large consumption of gasoline, but this can not be called a problem if the equipment is working properly. Sometimes operators are faced with inconvenience when using an old tire, in which case you can purchase at 16 inches.

If you compare with analogues that are produced, for example, by the company "Shtil", then the model described in the article is more enduring, as the buyers emphasize. It is possible to confront the lack of the opportunity to start the instrument from the first time, as the consumers say, even if the candle is not properly aligned, and it can be adjusted. Sometimes it is a question of a sufficiently bad quality of the metal of the chain, in addition, the tool is afraid of overheating.

Feedback on the device

If you decide to purchase the Huter BS 52, the circuit and the bus must be connected in the first stage to the head part where the controls are located. Users like that the lower part of the handle has a protective extension that excludes injuries when the chain breaks. This extension is used for additional mounting of the housing when starting the motor. On the handle is the rotary control key. All are arranged in such a way that you can increase the speed by holding the handle tightly. Such chainsaws, which prices may seem to some buyers quite high, have a cylinder with a surface that creates the effect of increasing the area, this contributes to the removal of heat and to avoid the possibility of overheating.

Petrol for chainsaw must have a mark of 92, it is added to the oil for two-stroke engines in the ratio of 1 to 25. The manufacturer established a warranty period of operation, which is equal to one year. But if you properly use and maintain the tool, and store it in accordance with the instructions, it will last much longer.

Adjusting the carburetor

The chainsaw carburetor may require adjustment, which is necessary when the settings fail. This can occur due to intense vibration when the protective cap is damaged. In this case, the bolts lose the fixed fixation. This need may arise due to wear of the piston engine. At the same time carburettor adjustment will help only for a while, it's best to replace the worn out part. When using poor-quality fuel, clogging may occur, scale formation occurs and the filter will be damaged. To solve the problem, it is necessary to disassemble the carburetor, rinse and adjust it.

The characteristics of chainsaw will allow you to carry out maintenance yourself. The factory setting is optimal, but with the help of screws you can adjust the operation of the engine. To increase the speed, use the screws, turning them clockwise. But first you need to remove the top cover by unscrewing the three bolts. Next is foam rubber, which acts as part of the air filter. Then it is necessary to remove the fuel hose and drive rod. Then the tip of the cable is removed, and to the left from the union - the gasoline hose. After it is possible to disconnect the carburetor, it can be considered ready for adjustment.

Tool sharpening

Sharpening the chainsaw may be required when the chain teeth are no longer sharp, just like when the equipment was purchased. This you will notice when the unit ceases to be high-performance. It is difficult to operate with a single file only, therefore it is recommended to use auxiliary tools that help to adhere to precise grinding parameters. Such sets are realized in a complete set with chainsaws and separately.

It is recommended to use a round file, since its shape accurately repeats the inner contour of the tooth. The edge of the working part of the tool should be above the cutting surface by 20% of the diameter. First, the cutting part of the teeth should be worked, and after the tooth-limiter.