How to make slopes on plastic windows and what material to choose?

Replacement of the window always entails a number of additional works. To make the opening look complete, you need to install window sills, and close the perimeter with slopes. Many companies offer this whole range of services when concluding a contract for the replacement of the window "turnkey". Of course, if you know how to make slopes on plastic windows, then you can perform these works yourself and thereby save your money.

The cheapest thing to use plaster. But this work is not simple and requires certain skills. In addition, the surface of the walls themselves should be prepared for applying a layer of plaster. Therefore, first make a primer, then level the walls and only then paint the slopes.

On windows, PVC slopes can be made of plastic panels. Their choice is great, the store presents different colors, different textures. You can pick up plastic with imitation under a tree of different breeds. There is an oak, pine, beech, cherry. Looks good marble or malachite. But for slopes more often use white panels. They help to shade the window, especially if it is made of wood.

Can be used for gypsum slopes. It is even cheaper than plastic. It is better to take moisture resistant sheets. They are treated with a compound that helps protect the material from moisture. How to make slopes on plastic windows from gypsum? The technology is slightly different from the plastic panels, but the base is the same. Giprok can be painted with paint or paste on it a thin sheet of plastic.

How to make slopes on plastic windows with less effort, but with high quality? For this, you can use sandwich panels. They allow you to combine two components: a heater and plastic. They can be used without additional warming of the slope.

What is the sequence of the whole process? How to make slopes on plastic windows correctly? For this it is better to decide in advance with the material. Sandwich panels can be stacked in a special profile, which is attached to the window frame during installation. The second option of fixing the finishing panels is in the mounting foam. To do this, the window gape from all sides. After the foam hardens, the panels are fixed in it, and the connection points are protected with silicone.

Slopes for windows can be made of different materials. But in order to give the exhibition a complete look, the panel and wall panels are closed with a casing or corner. If you decide to simplify yourself further care for the windows, then it is better to use plastic platbands on snaps. They can always be removed before repair or before you decide to re-paste the wallpaper.

On how the slopes will be made, the heat in the apartment depends. Therefore, if you have completed the embankment fixing yourself, check if it is blowing from the window. This can be done with a tongue of flame. To do this, light a candle or just a match. By the deviation of the flame, it becomes clear whether there are cracks in the slopes. In order to prevent the windows from freezing in winter, it is better to eliminate all errors beforehand.

When choosing material for slopes, consider that gypsum and plaster should be periodically updated. Plastic panels are enough to wash together with the windows, and they will again look fresh and beautiful.