How to install the stove in the garage with your own hands?

When the cold days are approaching, many citizens are wondering how the stove in the garage is installed by their own hands. The main disadvantage of many such designs are their rather large sizes. However, you can find something compact, but quite powerful. This is especially important in this case, as the garage doors open frequently.

Electric or gas appliances do not fit, because they consume a lot of fuel. They are not efficient and economical. The ideal option would be a design that works on solid or liquid fuels.

There are several main parameters that you should pay attention to when choosing a solid fuel stove for a garage.

• First, it should not occupy a large area. In addition, if the stove in the garage was not installed permanently, then in the warm season it can be removed from the heated premises.
• Secondly, high-level fire safety, so as not to watch the stove for hours.
• It should also have a good supply of power, since, depending on the situation, the heating level must be different.
• Fuel for the furnace can serve even ordinary rubbish, which constantly accumulates in the garage, saving you this from blockages.

There are several options for such devices.

Burzhuyka

Classic stove in the garage made of metal. It works from firewood. This is a metal welded container, in which there is a door to load fuel, and a chimney. Its advantage is a simple design, and it has many shortcomings:

• Short working life due to metal burn-out.
• Difficultly regulated combustion process: either everything burns out quickly, or does not burn, because there is no thrust and fuel of poor quality.
• Low efficiency, because of which a lot of heat flies through the pipe.

And yet it is very popular due to its low price and simplicity in self-manufacturing.

Bugler Furnace

For it, all solid is used as fuel, which can burn (both firewood and peat). This oven is becoming more popular. After all, with a single fuel deposit, it will be heated for 10 hours. Its efficiency is approximately 80% due to two combustion chambers. This is an important property of this design. In this furnace, the combustion is regulated by a damper, and the room warms up rather quickly.

Features of the use of bouleriana:

• The chimney is preferably made of a sandwich-pipe, which will allow the channel to escape from condensate and soot.
• The height of its location from the floor should be at least 20 cm, and the base should be made of heat-resistant material.
• It is better to kindle this stove in the garage with paper. Then solid fuel is added.

The furnace on "working off"

It looks like a burzhuyku, but as a waste oil is used. The device is simple, but reliable at the same time. How to install this stove in the garage with their own hands? It's pretty simple.

You need two tanks connected by a pipe, in which there are many small holes. The lower part is a fuel tank and a boiler. In this container, when heated, fuel is produced. The top element - a pipe with a tank - is a furnace and a heating element. These furnaces can be heated to 700-900 degrees. Its lower volume is 8-15 liters, which is enough for 10-20 hours of operation. In this vessel is a hole-lid, which sucks air and serves as a filler neck, and also regulates the power of combustion. Only dense metal is used for the manufacture of this furnace. The exhaust pipe also needs to be strengthened, since its temperature sometimes reaches 250 degrees. All the details should be made removable because of soot in the channels, which need to be cleaned at least once a week. It is kindled quite simply. To do this, pour 1 liter of fuel into the lower tank. Then put a newspaper in the jellied hole and set it on fire. After 5-10 minutes, the tank is heated, and the combustion is transferred to the pipes.

After all that has been said, it should be noted that homemade stoves for a garage require special knowledge and skills when manufacturing, and if they are improperly constructed, they can be dangerous, that is, in this case it is better to turn to specialists.