How to fill the seal? Ink Stamp

In modern offices, automatic stamps are used instead of old stamps. Their second name - trodata, by the name of the company, which manufactures rigging. With constant use, the ink dries, and the stamp on the paper is almost invisible. Therefore it is important to know how to fill the seal.

For this, it is not necessary to contact a specialized company, because everything can be done independently. The instruction is in the boxes in which the product is located. Having become acquainted with simple rules, it will be easy to do everything on your own.

How to remove the ink pad?

Standard automatic printing in the middle has a stamp pad. It will be noticeable when viewed from the side. To determine how to fill the seal, you need to remove the pad. To do this, click on the 2 buttons on the sides of the thread. At the same time, it should be pressed down a bit.

If everything is done correctly, and the snap is not damaged, the button will fix a slightly pressed state. Then with the usual pencil, you need to pull the cushion from the side gap. The self-made press and other types of stamps are also refueled.

Preparation

Before you learn how to fill the seal, you need to clean the pad and remove any dirt from it. If there are dents, they need to be smoothed out with a light object. To do this, you can use a regular paper clip. Its tip is leveled with impressions.

The corrupted pillow has no elasticity, besides it does not absorb ink. There are strong dents visible on it that can not be smoothed out. It can not be restored, moreover, it is not suitable for work. Do not use such a product, you should buy a new one. In this case, there will be no need to know how to fill the seal with ink.

Stamp paint application

How to fill the seal, if the pads are prepared? Paint is produced by different companies, including Russia. Do not use mascara or other liquids for this, because then the product will be quickly spoiled.

In the standard bottle of paint there is a dispenser that allows drip to apply paint. It is enough to apply a few drops evenly. All unnecessary should be cleaned with a napkin. After this, pick up a little before absorbing the liquid.

Then the cushion should be inserted into the equipment with the side with the ink down. How to properly fill the seal with ink, if 2-3 colors are used? It is necessary to pull out the pads, filling them with suitable ink. The procedure is the same as with the rest of the products. So refills samonabornaya printing.

Flash Printing

Now in demand flash print. In comparison with the usual stamp their surface is smooth. The product uses several colors, the impression is accurately and evenly applied. Such stamps are considered durable and protected, so they are chosen for many organizations.

Filling single-color flash printing

Although the product is wear-resistant, after a while it should still be filled with ink. To do this quickly, you will need a syringe and a stamping ink to print. The cliché is on the cushion pad. It is necessary to remove the cliche and put it on a smooth surface. The paint is applied with a syringe. Each layer must not be more than 2 mm. The paint must be absorbed, after which you should wipe off the ink residue and collect the print.

Filling multicolor flash printing

To refuel such a product, you need to get a cliche as described above. The part is filled with syringes, during which it is necessary to control, so that there is no mixing of colors. Paints of different shades have differences in the degree of fluidity.

The paint should be applied to one segment, and then to the second. With dressing each color, you need to use different syringes, so that the colors do not turn out to be washed out. The paint should be distributed, and this takes time. Then the cliche should be inserted in its place, and it is possible to perform prints.

Stamp paint

Now you can find paints of 3 types: water, oil, alcohol. Their differences are in manufacturing technology. Water-based paints are used for printing on paper and materials that absorb water well. They are used for office seals and stamps. Paint suitable for manual and automatic products, facsimile, numbering. It serves for filling different stamp pads - desktop, removable, automatic.

The advantages of water colors include:

• Fast absorbency;
• Firmness;
• Safety of dies;
• Can be used with seals from different materials.

Because of these advantages, many companies choose their products to conduct their work. There are colors such as purple, blue, black, red, green. Each of them is clearly visible on paper, which is why many of the offices choose these paints.

Alcohol paints are used for surfaces that do not absorb moisture. They will be irreplaceable for glossy paper, plastic, polyethylene. With the imprinting of the alcohol, the alcohol evaporates, and a permanent impression is obtained. Alcohol is an aggressive component, so it acts destructively on different materials. This paint is not suitable for:

• Automatic printing, because alcohol causes contamination of the product, destruction of the cushion;
• Seals with a polymer cliche, which are adversely affected by alcohol.

The assortment of alcohol paints is richer, as there are purple, blue, black, orange, pink. Qualitative stamps are obtained.

Oil paints are the most resistant. They are used for labeling and numbering products. Oil is necessary for deep penetration of paint, so it will be difficult to remove the impression. They are used for different papers. They can be used to refuel franking machines, numerators and other outfits with a metal cliche.