How to draw a beautiful airplane?

We all know how to make airplanes from paper - this simple art was learned by every schoolboy in our country. But here is to draw it so that everyone around gasped, maybe not everyone. It seems that it is no less difficult to depict this machine on paper than to create a drawing of this aircraft. Although in fact, this opinion is erroneous. And in this article you will learn how to draw a plane quickly and correctly.

Of course, you can do with a schematic image - the way this miracle of technology is usually painted in animation. But we always strive for more, and therefore we learn to draw the plane really, taking as a basis a passenger liner, which can be seen at every airport. Let's start our creative process.

How to Draw a Plane

We take a pencil in hand, and nearby we put the compasses and ruler. Well, of course, in any complex drawing, you just need a good eraser - erase errors and superfluous axial lines.

We draw the plane in stages, starting with the basic figures, from which our drawing will be created. So, for starters, we need to draw an oval, stretched quite strongly horizontally. This will be the "body" of the aircraft - in fact, in reality it has exactly this form. To place our oval on the sheet should not be horizontal - usually the nose is slightly elevated, and therefore the first figure will be depicted at an angle of 30 degrees. It is better to place it slightly to the left of the center of the sheet - in the future the right side will be needed.

The second figure, which will form the basis of the aircraft, will be an oval of a smaller size - a future turbine. It is located in the left lower part of the main ellipse, slightly beyond its limits, in the same position relative to the sheet. In the right edge of the ellipse, you need to draw two lines from one point, they will diverge at an angle to each other. Another line will run along the entire length of the ellipse - it will be axial for the portholes.

Second phase

Now you need to draw a turbine, and then from it to the top draw a line and draw a windshield. And then just above the base ellipse, just above, smoothly depict the roof of the plane - it should go parallel to the center line. And along the lengths of the tail part, you have to build a tail, as in the axes.

Next to the first turbine, at a short distance on the right, we draw the second one and draw the details. After this, you can proceed to the third stage.

Next stage

So, the basic parts are already depicted. Now through both turbines along the axis of the lower part of the ellipse we draw one more line - the bottom. In the right part of the figure, it should be carefully and smoothly connected to the tail. We draw a wing above the second turbine in the direction of the second tail line. We display small details - portholes, a hatch, parts of a windshield. After that, we erase the first basic figures - they performed their function. And the contours of the resulting aircraft must now be inverted and, if desired, painted. Do it best with a soft pencil.

Conclusion

Now we have completely figured out how to draw a plane. We hope that you understand what needs to be done. If you are asked about how to draw a plane, you will be able to tell everything in detail.