How to disassemble the "iPhone 4" without a special tool

The water trapped on the inside of the iPhone is the most common cause when an emergency disassembly of the body part of the device is required. However, in order to remove the phone's battery and protect electronic components from the damaging effects of liquids, you need to know how to disassemble the "iPhone 4". However, not every of the owners of the brand device has the technical means in the form of a specialized mobile tool. Nevertheless, the situation requires decisive action.

Solving the problem without using a professional tool

However, without a thin cross-type and flat-blade screwdriver, all your attempts to carefully dismantle the smartphone's panel are obviously doomed to failure. However, even in the presence of the above-mentioned instrument, difficulties in disassembling can still be avoided. The fact is that at the first stage of the dismantling you will need to unscrew two pentalobe screws. The five-pointed sprocket (the profile of the bolts fixing the lower end of the body) can easily be twisted if you feel the "stable" edge of the screws.

Forced retreat, or How to disassemble the "iPhone 4" without consequences

Attention: any slipping of the tool, useless rotation (removal of stubborn chamfers) with the use of excessive force, and shaking hands are strictly unacceptable in the process of extremely responsible business - dismantling. All that you can achieve under these conditions of work - this is mechanical damage to the body (deep scratches, chips and peeling) and ripped screws.

Removing the cover and disconnecting the battery

Sequencing:

• Unscrew the pentalobe bolts, slide the back of the panel up, and then lift it up.
• The battery cable is closed with a protective cover. Unscrew the screw and use an old bank card to gently pry the connector clip.
• Pull the battery insert tab.

At this stage, the first stage of the described process "How to disassemble the iPhone 4" is completed, now your device is not shorted .

Dismantling the main camera

Further manipulations:

• Pull out the SIM tray.
• Two horizontally placed bolts at the top, as well as two lower ones closer to the left edge, twist. Remove the protective steel plate.
• Dismount the vibration motor (top right corner-screw).
• Disconnect the connectors of 5 loops.
• Take off the camera.

Removing the System Board

This is the most responsible part of the practical guide, covering the issue of how to disassemble the "iPhone 4".

• A protective strip is located near the battery connector connector. After unscrewing the two fixing screws, remove it.
• Unplug the system stub from the card and take it to the left.
• Now, at the bottom of the phone on the right, unscrew the mounting bolt of the polyphonic module. After disconnecting the coaxial cable, remove the plastic part.
• In the middle of the motherboard (closer to the middle of the case) is a fixing screw, which must be unscrewed, in order to free the motherboard of the smartphone.
• Carefully poddevayem "heart of the iPhone" and remove it from the frame.

Important "little things"

Now it remains to remove the "hinged" details, and the question of how to disassemble the "iPhone 4", the photo of which you see in the understaffed version, can be considered almost solved.

• At the bottom of the phone, unscrew the two screws holding the bottom cable.
• On the right, gently pull (pinch!) The microphone, which is in the end cavity of the case.
• Disconnect the button of the button "Home" and remove it.
• Now remove the system connector.

By the way, it is in the details that the processes of dismantling the iPhone 4 and modifying its receiver with the significant letter "S" differ. However, the essence of the question: "How to disassemble the iPhone 4 S" is identical to the described process, not counting a few bolts and some dimensional differences in details. For example:

• The top of the smartphone is simply "strewn" with a variety of small details. Therefore, extreme attention is an extremely necessary element in such a responsible process as the final stage of disassembly of the iPhone device.
• The audio unit is fixed to the internal end screw.
• The front camera is simply pulled out of the grooves of the frame.
• The speaker, buttons and sensor are removed, in general, elementary. It is important only not to make sudden movements and be extremely attentive.

The final stage of the work

The screen module is not recommended to be affected. Even if there is an obvious hit of moisture in the interior of the display, you can hardly at home eliminate the unpleasant factor of fluid penetration. In the case of complete wetting your iPhone visit to a specialized workshop, you simply can not be avoided. If, on dismantling, you did not find any traces of water, then you only need to carefully wipe the connector sites with alcohol and assemble the device in its original state.

Summing up

Now you know how to disassemble "iPhone 4". The Chinese clone, by the way, is much more difficult at dismantling, as some structural elements are fixed on an adhesive basis, which at times increases the risk of damage to the removed part. However, this is a separate topic of the narrative. Successful "iPhone" -assembly!