How to connect two computers to the Internet

If you are faced with the situation when you need to connect two computers to the World Wide Web, while having only one cable from the provider, then you need some specific solution. Some simply alternately connect through this cable, one PC to the network, then another, but this solution is difficult to call a convenient way out of the situation. The question arises as to how to connect two computers to the Internet, providing simultaneous access to the network from both devices? So, let's figure it out.

How to connect two computers to the Internet

First of all, it should be said that the solution of this issue requires the availability of a certain tool. You will need a switch - a network hub.

Now you have to choose the machine that will be assigned to the tasks of distributing the Internet channel between the other members of the network. This computer must have at least two network ports, where you can connect the cable. If we are talking about a small office or home network, then for this purpose it is best to choose one that can be called the most powerful in performance. It should be most of the time when it's on. This condition is mandatory, because when you turn off the computer serving as a server, you will deprive all other machines in the home Internet network. It is worth recalling that we are considering cable Internet, so further you need to do the following. A network card should be connected to the provider's cable, and the second one must be connected to the hub. To the latter then it will be necessary to connect all other machines using the lengths of the network cable of the required length.

If you consider how to connect two computers to the Internet further, then you should say that now you will perform the setup procedure. The first PC configures the connection. This is done as follows: you must enter the "Connection properties", select the "Access" item, and then set the permission to use this connection to all computers located in the local network. Well, now you need to change the settings. In the field "IP-address" you need to install 192.168.0.1. Using this particular address will save you from many problems associated with accessing the network from other machines.

To install the Internet on all other computers of the home group, you will need to perform a number of manipulations from each individual PC. You will need to open the local network settings. Certain fields must be filled with completely specific numbers.

- IP-address: 192.168.0.M, here M can be any number in the interval 2 - 250;

- Subnet mask should be standard;

- the default gateway is set: the IP address of the first machine serving as the server.

How to connect two computers to the Internet via a router

This type of connection requires a special device called a router or router. The most optimal option, providing convenience and mobility, is the presence of a Wi-Fi-module in a computer or laptop. In this case, there will not be any problems with adding one more device to the network. First you configure the router. This process can be slightly different for different models, as each of them has its own interface and firmware. Typically, the device is connected to the computer, and then the manipulation via the web interface, where the address is replaced by a network address, which differs for different models. It is important to remember the security settings of the network, which will not allow your neighbor to use the wireless Internet that you have installed for yourself. Any router is usually supplied with an instruction in which everything is described in detail.

Of course, there are other subtleties and nuances of setting up a network for two or more computers, but all of them require separate consideration.