Computers, Equipment
How to connect to the Internet through the phone yourself
It is unlikely that anyone will dispute the fact that on the vastness of the global network you can find almost any information. Especially if you know where to look. But in this case it may seem that it is quite realistic to manage only one search engine - for example, Google or Yandex. Alas, this is not entirely true.
Initially, the main task of the phone was to provide voice communication. The equipment of telephone exchanges, in accordance with the dialed numbers, temporarily connected the subscribers with a communication line. Simple and effective.
But several decades ago the cost of computing began to decline rapidly. Many computer owners began to think about how to connect to the Internet. The choice was not great - the phone. It is interesting that since that time little has changed - the principle of solving the problem has remained the same. So, how to connect to the Internet through the phone?
Dial-Up technology provides speed on good lines with digital PBXs of no more than 7 kbps (56 kbps). To "run" the Internet through your home phone, in addition to the contract, you need to connect the wire that goes to the device to the modem. In most laptops it's built-in. The connector resembles Ethernet, but with fewer contacts.
In Windows 7, start the "Network Management Center" (right-click on the monitor icon in the lower right corner). Open "Create a new connection". Further all is simple: connection to the Internet - switched. Specify the number to be dialed and the password / login - these data are provided by the provider. Note that the modem in the system must be defined (put the driver). Usually, in addition to the cost of the service, the subscriber pays for every minute of connection at the standard tariffs of the telephone company. Now, due to the low speed of Dial-Up access has lost its relevance. Its advantage is a theoretical opportunity to use the services of very remote providers.
In the modem, you need to enter the provider settings - VCI and VPI numbers. Here you can specify the password and login (registered for the router) registered during registration. The connection setup is similar to Dial-Up - only specify "High-speed, requesting password".
Similar articles
Trending Now