How to apply liquid wallpaper competently and according to the rules

There are a lot of different decorative materials used to finish the walls. And if you choose such materials, then among the usual you can find liquid wallpaper in the bedroom. The photo shows that this material is very original and unusual. This is a very plastic version of the finish, and it should be considered in more detail.

This name has small sawdust, having a white color, which in fact is a dry mixture, made of wallpaper material, which is impregnated with glue. How to apply a liquid wallpaper and what will happen as a result? And as a result, you get the impression that a small and very strong foam with an increased hardness was applied to the wall.

Today, there are a lot of different types of materials, and the answers to the popular question about how to apply liquid wallpaper, a great many. This material is divided into species by the thickness of the finished layer, and also by the structure of the fibers. A thin layer is formed by the wallpaper in 2-3 mm. And the thickness of the variant, the initial result of which is somewhat similar to the fabric, is usually about 4-5 mm.

Thanks to the porous structure, liquid wallpaper perfectly saves precious heat, and also have soundproofing properties. Due to this, the coating is very environmentally friendly, and also "breathes". In addition, this type of finishing material is not deformed and does not break.

But this material also has drawbacks. For example, these wallpapers are very easily and quickly washed off with water, which is convenient if they need to be removed from the wall, but impractical in normal operation. To make this material resistant to moisture, it is necessary to coat it with a colorless protective varnish. The beauty of the walls will be preserved, and they can also be wiped off with a slightly damp cloth, without damaging them at the same time.

How to apply a liquid wallpaper? This requires a container in which it will be necessary to dilute the mixture, spatula or roller (if possible, it is necessary to apply a spray gun, whose pressure is about 0.5 mPa, or the so-called "hopper gun", which quickly and evenly applies to Wall mixture). Often the question arises as to how to apply liquid wallpaper, so that an interesting and unique pattern is formed. Then, this requires a roller-knurling, which is specially designed for this.

Before you apply liquid wallpaper, you need to prepare the surface well, which requires two things: an alkyd primer and putty (oil only).

To the dry mix, you need to add the necessary amount of warm water and let this solution last for about 10-15 minutes. If you need to change the color, you can add some dye there, after which you will need to mix it thoroughly with the base.

First it will be necessary to stick a hand to the wall a piece of the mixture and roll it in different directions with a roller. Then, in the same way, paste the next part. We must not forget to make sure that the surface is smooth, without emptiness and bulges.

If it turned out unsuccessfully, you must first water a little wallpaper, remove the wall cover and apply again.

Plus such material is that you can create an unimaginable figure, for which you need the above-mentioned knurl.

Such wallpaper dry from 12 hours to three days. It depends on the humidity and temperature in the room. After the material dries, it can be covered with a protective varnish.